• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.163-167
• /
• 2002

We have fabricated planar-type single-layer second-order high-Tc SQUID gradiometers. The devices consisted of symmetrically designed three parallel-connected square pickup loops that were directly coupled to the SQUID. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ substrate by a PLD system and patterned into a device by the photolithography with ion milling technique. Junctions of the SQUID were either step-edge or bicrystal type. All the structures were formed on a 10 mm $\times$ 5 mm substrate. Balancing of the gradiometer was achieved by adjusting the width of the central pickup loop. The gradiometer noise was measured both inside and outside a magnetically shielded room. Details of the results will be discussed.

• 한국추진공학회지
• /
• 제5권3호
• /
• pp.52-59
• /
• 2001

본 연구에서는 고체 추진제의 가스 발생기를 이용한 발사시스템에 대하여 해석적 연구를 수행하였다. 가스발생기에서 발사관까지 모든 발사장치 내부의 열역학적 거동과 유도탄의 동적거동에 대하여 물리적인 모델을 수립하였고, 열손실 모델을 적용하였다. 발사시스템과 가스발생기 내의연소, 유동 및 열전달 과정이 수치적인 방법에 의해 모사되었다. 본 연구에서 제시된 이론적인 해석방법을 통해 사출 발사시스템의 성능 요구조건과 신뢰성을 만족시키는 가스발생기와 시스템의 최적 설계 조건을 도출하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.779-785
• /
• 2006

Particle transport and deposition characteristics on semiconductor wafers inside the chamber were experimentally investigated via a particle generation & deposition system and a wafer surface scanner. Especially the relation between particle size($0.083{\sim}0.495{\mu}m$) and particle deposition velocity with ESA(Electrostatic Attraction) effect was studied. Spot deposition technique with the deposition system using nozzle type outlets of the chamber was newly conducted to derive particle deposition velocity and all experiment results were compared with the previous study and were in a good agreement as well.

• 대한치과보철학회지
• /
• 제36권5호
• /
• pp.772-785
• /
• 1998

This study was undertaken to clarify the microstructure of the different IPS Empress ingots by etching and to observe the change of leucite crystal structure according to subsequent heat treatment and the crystal distribution according to sprue types(${\phi}2.8mm$, single sprue; ${\phi}1.8mm$, double sprue) by scanning electron microscopy. IPS Empress T1, O1 ingots used for staining technique, and Dentin(A2) ingots used for layering technique were selected for this study. To observe the microstructures of these ingots before pressing, the specimens were prepared in splinters($3{\times}3{\times}3mm$) taken from the original ingots. And to estimate crystal distribution and microstructural change by sprue type and subsequent heat treatment. the specimens($3{\times}3{\times}3mm$) were heat-pressed through the two types of sprues with different diameters and numbers, and all specimens were fired according to the recommended firing schedule. The observed surface was ground with waterproof papers($#800{\sim}#1800$) on the grind polisher and was cleaned ultrasonically. All specimen were etched with 0.5% hydrofluoric acid. After etching, the surface was treated by ion sputter coating for SEM observation at an accelerating voltage of 20kV. In all specimens, the central area of ground surface was observed because there was less difference in microstructure between the peripheral area and the central area. The results were as follows ; 1. In the microstructure according to the ingot type, there was a wide difference between the staining (T1,O1) and layering(Dentin A2) ingots, but there was not a considerable difference between the T1 ingot and the O1 ingot for staining technique. 2. In all specimens, the crystal dispersion of IPS Empress ceramic using double sprue was significantly more scattered than that of IPS Empress ceramic using single sprue. The degree of scattering was strongest in the Dentin(A2) specimen and weakest in the O1 ingot. 3. In the microstructural change according to the subsequent heat treatment, all of ingots had some microcracks in the inside of the leucite crystal and the glass matrix after pressing. The inner splinters of the leucite crystal became smaller, and more microcracks occurred in the glass matrix due to increasing heat treatment times. 4. The size of leucite crystals varied from $1{\mu}m\;to\;5{\mu}m$. The mean size of mature crystals was about $5{\mu}m$. The form of the crystal was similar to a circle when it was smaller and similar to an ellipse when it was larger.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.61-68
• /
• 2004

오늘날 모든 칩들에는 보드레벨 테스트를 위한 IEEE 1149.1 TAP 컨트롤러가 설계되어 내장된다. 하지만 최근에는 보드레벨 테스트뿐만 아니라 기능적 목적을 위해서 TAP 컨트롤러가 내장되는 경우도 다수 존재한다. 따라서 이러한 IEEE 1149.1 TAP 컨트롤러 회로를 테스트하고 모니터링 할 수 있는 동시 에러 검출 (CED: Concurrent Error Detection) 테스트 기법이 개발되었다. 본 논문에서는 기존에 제안된 여러 종류의 CED 테스트 기법을 IEEE 1149.1 TAP 컨트롤러에 적용하여 최적의 면적 오버헤드를 구현하는 기법에 대해 연구한다. 중복 기법과 패리티 예측 기법, 그리고 혼합 기법을 각각 연구하였으며, 혼합기법이 IEEE 1149.1 TAP 컨트롤러를 테스트하는 데 가장 적합한 CED 기법임을 실험을 통하여 알 수 있었다. 따라서 혼합기법은 앞으로 IEEE 1149.1 TAP 컨트롤러를 테스트하는 데 널리 사용될 수 있을 것이다. 또한 본 논문에서는 기존에 제안된 기법을 더욱 향상시켜 TAP 컨트롤러를 테스트하는 데에 소요되는 면적 오버헤드를 최소화 시켰다.

• 한국재난정보학회 논문집
• /
• 제3권2호
• /
• pp.79-93
• /
• 2007

With international urgence of terror situation, many methods of terror techniques and skills are appearing and more intense and threatening terror is braking out not only in the air(plane), but also in the sea(ship). Korea is surrounded by 3 sides of sea and is a proud maritime nation that should advance to foreign country through the sea because South Korea and North Korea are confronting. Korea depend on the maritime transportation, 99.7% of exporting, importing material resources. Therefore, acquisition of the marine safety has the great affect on national security and economical life. On the high tension of situation about threat and possibility of maritime terroism, the potential ways of the improvement policy for counter-tactics against big maritime terror are the following. First, we should construct clear and well-organized network for accurate information about maritime terrorism Second, we should have the information of all domestic, foreign passenger's ships Third, national important facilities such as atomic energy plant, thermo-electric power plant, shipyard need policies to manage all emergency situation Fourth, government authorities should improve tactic abilitities by competing with support and budget inside of nation as well as outside of nation. To develop big maritime terror of our country, we will have to hold cooperative training & tactics contest of big maritime terror by cooperating educational industry organization with similar institute, improve the ability of members of big terror and acquire tactics information by excavating and exchanging a new technique through tactics seminar and public hearing.

• 대한두개안면성형외과학회지
• /
• 제21권6호
• /
• pp.345-350
• /
• 2020

Background: This study evaluated the efficacy of the endoscopic medial orbital wall repair by comparing it with the conventional transcaruncular method. This surgical approach differs from the established endoscopic technique in that we push the mesh inside the orbit rather than placing it over the defect. Methods: We retrospectively reviewed 40 patients with isolated medial orbital blowout fractures who underwent medial orbital wall reconstruction. Twenty-six patients underwent endoscopic repair, and 14 patients underwent external repair. All patients had preoperative computed tomography scans taken to determine the defect size. Pre- and postoperative exophthalmometry, operation time, the existence of diplopia, and pain were evaluated and compared between the two methods. We present a case showing our procedure. Results: The operation time was significantly shorter in the endoscopic group (44.7 minutes vs. 73.9 minutes, p= 0.035). The preoperative defect size, enophthalmos correction rate, and pain did not significantly differ between the two groups. All patients with preoperative diplopia, eyeball movement limitation, or enophthalmos had their symptoms resolved, except for one patient who had preexisting strabismus. Conclusion: This study demonstrates that endoscopic medial orbital wall repair is not inferior to the transcaruncular method. The endoscopic approach seems to reduce the operation time, probably because the dissection process is shorter, and no wound repair is needed. Compared to the previous endoscopic method, our method is not complicated, and is more physiological. Larger scale studies should be performed for validation.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.115-121
• /
• 2005

The building below standard scales to be built only by constructive report to authorities. Construction law 8 illustrates that supervision should be deployed in all the construction sites at the building which is found to have more than 3 floors and also to have more than loom of total squares in especially outside area of city plan zone. Such a small construction is have a important and the most basic meaning. Many problems were found to occur in all the constructive places which were out of the limit of this law. The construction sites were found to be controlled by public official's visiting without supervisors and designers of architecture. Technique of construction in architecture was found to be not different from that of 1980. The security of employees in construction on sites has a serious problem. Because of choosing ail the materials of the building without a reasonable point. All the building were found to have a law material about inside and outside aspects. The purpose of this study are to examine existing law about a small project and than to analyze the situation of constructive control through questionnaires and interviews with all the supervisors. Based on the data base of engineers who had a great experience in construction sites, The purpose of this study is also to suggest and advise the method of controlling all the items in architecture through on and off line.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.945-949
• /
• 2009

비디오 부호화 기법에서 압축률 및 화질을 결정하는 중요한 부분인 움직임 예측 및 보상(motion estimation and compensation)의 성능을 개선하기 위한 방법을 제안한다. 가장 기본적인 움직임 예측 기법인 전역 탐색 방법은 가장 좋은 화질을 보이지만, 현재 프레임의 각 블록과 가장 유사한 블록을 찾기 위하여 탐색영역(search area)내의 모든 점에 대해 탐색을 수행하므로 그 계산량이 매우 많게 된다. 따라서 좋은 화질을 유지하면서 계산량을 낮추기 위한 많은 고속 알고리즘이 제안되었는데, MPEG-4 표준에 채택된 PMVFAST는 움직임 벡터 간의 상관도를 이용하여 계산량을 낮추면서도 전역 탐색 기법에 근접한 화질을 보인다. 본 논문에서는 움직임 벡터의 예측을 위하여 중간값(median) 계산법에 의한 새로운 방법을 제안하고, 이를 이용하여 움직임 예측의 계산량을 획기적으로 줄일 수 있음을 보인다. 실험결과 제안한 알고리즘은 PMVFAST보다 빠르면서도 전역 탐색 기법보다 높은 평균 PNSR을 보인다.