• Title/Summary/Keyword: Akita International University

Search Result 19, Processing Time 0.024 seconds

Design of Surface Permanent Magnet-type Vernier Motor

  • Kakihata, Hironori;Kataoka, Yasuhiro;Takayama, Masakazu;Matsushima, Yoshitarou;Anazawa, Yoshihisa
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • v.2 no.2
    • /
    • pp.127-133
    • /
    • 2013
  • In this paper, the authors designed a surface permanent magnet (SPM)-type vernier motor whose maximum output is more than 5.2 kW, whose power factor at 4 kW is more than 90%, and whose efficiency at 4 kW is 85% under the conditions that the operating voltage, frequency, and synchronous speed are 400 V, 50 Hz, and 100 min-1, respectively.

Comparison of Three Magnet Array-type Rotors in Surface Permanent Magnet-type Vernier Motor

  • Kataoka, Yasuhiro;Takayama, Masakazu;Matsushima, Yoshitarou;Anazawa, Yoshihisa
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • v.2 no.1
    • /
    • pp.1-8
    • /
    • 2013
  • Surface permanent magnet-type vernier motors with three magnet array-type rotors (parallel magnetized type, repulsion type, and Halbach type) are compared based on the pull-out torque. It was clarified that increasing the rotor radius increases the pull-out torque at a fixed three-phase alternating voltage. The mechanism for the pull-out torque increase on each magnet array type was different, when the effects of the increase were analyzed based on an induced electromotive force and a synchronous reactance. As a result, the design of the Halbach-type rotor was found to be especially effective for achieving high pull-out torque, because this array type achieves a large induced electromotive force $E_0$ and a small synchronous reactance $x_s$.

The Case Study on Convergence Education in Akita International University (아키타 국제교양 대학의 융합교육에 대한 사례연구)

  • Yim, Myung-Seong
    • Journal of Digital Convergence
    • /
    • v.14 no.6
    • /
    • pp.371-380
    • /
    • 2016
  • The aim of this case research is to describe the convergence education of Akita International University. Today, competition among universities in Korea are becoming more and more intensified, its strength is expected to continue to rise. In this situation, the Akita International University provides meaningful implications for universities in Korea. Universities in Japan are at similar situation in Korea. The unique values of Akita that we identified are twofold: The first is internationalization in education. The purpose of the internationalization is for Japanese students. For exchange students, AIU provides japan studies program and japan language program. To do this, AIU forms an international community to mingle Japanese students with foreign exchange students by living and learning together. Second thing is about international liberal arts education. The focus of international liberal arts education is that students acquire comprehensive range of skills and knowledge to build the intellectual foundation for specialist study by providing a broad range of academic disciplines. In doing so, students promotes learner autonomy. Unlike specialized education, in which students acquire an in-depth knowledge of a particular field, providing international liberal arts education is to find a field in which students want to study further. The implications and conclusions are discussed.

Further Improvements on Bose's 2D Stability Test

  • Xu, Li;Yamada, Minoru;Lin, Zhiping;Saito, Osami;Anazawa, Yoshihisa
    • International Journal of Control, Automation, and Systems
    • /
    • v.2 no.3
    • /
    • pp.319-332
    • /
    • 2004
  • This paper proposes some further improvements on N.K. Bose's 2D stability test for polynomials with real coefficients by revealing symmetric properties of the polynomials, resultants occurring in the test and by generalizing Sturm's method. The improved test can be fulfilled by a totally algebraic algorithm with a finite number of steps and the computational complexity is largely reduced as it involves only certain real variable polynomials with degrees not exceeding half of their previous complex variable counterparts. Nontrivial examples for 2D polynomials having both numerical and literal coefficients are also shown to illustrate the computational advantage of the proposed method.

Flow Field Change before Onset of Flow Separation

  • Hasegawa, Hiroaki;Sugawara, Takeru
    • International Journal of Fluid Machinery and Systems
    • /
    • v.2 no.3
    • /
    • pp.215-222
    • /
    • 2009
  • Jets issuing through small holes in a wall into a freestream has proven effective in the control of flow separation. This technique is known as the vortex generator jet (VGJs) method. If a precursor signal of separation is found, the separation control system using VGJs can be operated just before the onset of separation and the flow field with no separation is always attained. In this study, we measured the flow field and the wall static pressure in a two-dimensional diffuser to find a precursor signal of flow separation. The streamwise velocity measurements were carried out in the separated shear layer and spectral analysis was applied to the velocity fluctuations at some angles with respect to the diffuser. The pattern of peaks in the spectral analysis changes as the divergence angle increases over the angle of which the whole separation occurs. This change in the spectral pattern is related to the enhancement of the growth of shear layer vortices and appears just before the onset of separation. Therefore, the growth of shear layer vortices can be regarded as a precursor signal to flow separation.

The Aid-India Consortium, the World Bank, and the International Order of Asia, 1958-1968

  • Akita, Shigeru
    • Asian review of World Histories
    • /
    • v.2 no.2
    • /
    • pp.217-248
    • /
    • 2014
  • The Aid-India Consortium was organized in 1958 as an international scheme to support the economic development of India, and led by the World Bank. This article reconsiders the economic diplomacy of the Indian Government in the 1950s and 1960s, by paying attention to the interactions between the Indian authorities and the donor countries and institutions, in the context of the Cold War regime, decolonization and economic aid to the newly independent countries. First, it deals with the development of the Aid-India Consortium by considering debates at its annual meetings and the skillful negotiations of the Indian Government and financial authorities. It focuses especially on the leading role of an Indian diplomat and financial expert, B. K. Nehru. The article then tries to reveal an Indian initiative in solving the 'food crises' of 1965-67 through intimate collaboration with the US government and the World Bank, using the framework of the Aid-India Consortium. These attempts lead to a reconsideration of the economic order of Asia in the 1950s and 1960s.

On Realization of 2D Discrete Systems by Fornasini-Marchesini Model

  • Xu Li;Wu Liankui;Wu Qinghe;Lin Zhiping;Xiao Yegui
    • International Journal of Control, Automation, and Systems
    • /
    • v.3 no.4
    • /
    • pp.631-639
    • /
    • 2005
  • In this paper, we propose a constructive realization procedure for 2D systems which may lead to a Fornasini-Marchesini local state-space model with much lower order than the existing realization procedure given by Bisiacco et al. Nontrivial examples are illustrated and the conditions for minimal realization are also discussed.

Direct Measurement of Spindle Motion Error Using a Regular Crystalline Lattice and a Scanning Tunneling Microscope

  • Chaikool, Patamaporn;Aketagawa, Masato;Okuyama, Eiki
    • International Journal of Precision Engineering and Manufacturing
    • /
    • v.9 no.4
    • /
    • pp.11-15
    • /
    • 2008
  • Metrology tools with the ability to measure spindle motion error on the order of a nanometer are required due to recent advances in nanotechnology. We propose a direct measurement method for the radial motion error of a precision spindle using a regular crystalline lattice and a scanning tunneling microscope (STM). A highly oriented pyrolytic graphite (HOPG) crystal combined with an STM is used as a two-dimensional reference scale. The measurement principle and the preliminary experimental results are discussed in this article. The preliminary experimental results demonstrated that the proposed method has the capability to incorporate a two-dimensional encoder to measure the spindle motion error.

The Five Day Work Week System and Changes in Living Culture $\sim$Two Day-Off School System and Its Affects on Parents in Japan

  • Seiko SaWai
    • International Journal of Human Ecology
    • /
    • v.3 no.1
    • /
    • pp.127-136
    • /
    • 2002
  • According to the Labor Standard Law in Japan which was enacted after World War II in 1947, all work hours for adult men, women, and youth were set at a maximum of eight hours per day and forty-eight hours per week. In other words, a six-day work week, with only one-day off, was set. Now we are in the full five-day and two-day off school system. The five-day school week influences on our home life. Students are highly enthused by the new system, in looking forward to their personal time they now have to play with friends, to relax, or just watch TV. To implement this new five-day school system positively and effectively, we should see the point at issue related to the two-day off system from a different angle, which suggests that we should see far ahead into the future.