Browse > Article
http://dx.doi.org/10.11142/jicems.2013.2.2.127

Design of Surface Permanent Magnet-type Vernier Motor  

Kakihata, Hironori (Dept. of Electronics and Information Systems, Akita Prefectural University)
Kataoka, Yasuhiro (Dept. of Electronics and Information Systems, Akita Prefectural University)
Takayama, Masakazu (Dept. of Electronics and Information Systems, Akita Prefectural University)
Matsushima, Yoshitarou (Dept. of Electrical and Electronic Engineering, Shizuoka University)
Anazawa, Yoshihisa (Dept. of Electronics and Information Systems, Akita Prefectural University)
Publication Information
Journal of international Conference on Electrical Machines and Systems / v.2, no.2, 2013 , pp. 127-133 More about this Journal
Abstract
In this paper, the authors designed a surface permanent magnet (SPM)-type vernier motor whose maximum output is more than 5.2 kW, whose power factor at 4 kW is more than 90%, and whose efficiency at 4 kW is 85% under the conditions that the operating voltage, frequency, and synchronous speed are 400 V, 50 Hz, and 100 min-1, respectively.
Keywords
Surface permanent magnet type; Vernier motor; Design; Output characteristics;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. Anazawa, K. Tajima, A. Kaga, Y. Ito, and H. Isozaki, "Analysis of Vernier Motors Based on the Unified Theory," T. IEE Japan, Vol. 113-D, No. 11, pp. 1317- 1323, November, 1993.
2 A. Ishizaki, Y. Shibata, K. Watanabe, and K. Saitoh, "Low-speed High-torque Drive System Applying Vernier Motor Torque," T. IEE Japan, Vol. 111-D, No. 9, pp. 785-793, September, 1991.
3 A. Ishizaki, T. Tanaka, K. Takasaki, S. Nishikata, and A. Katagiri, "Theory and Torque Characteristics of PM Vernier Motor," T. IEE Japan, Vol. 113-D, No. 10, pp. 1192-1199, October, 1993.
4 A. Toba, T. Watanabe, Y. Koganei, and H. Ohsawa, "Design and Experimental Evaluation of 5 kW-Surface Permanent Magnet Vernier Machines," T. IEE Japan, Vol. 122-D, No. 2, pp. 162-168, February, 2002.
5 IEE Japan, "Design of electrical machinery and apparatus," 1982.
6 H. Suda, Y. Matsushima, and Y. Anazawa, "A Study of Analysis and Characteristic of Surface Permanent Magnet Vernier Motor," Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-07-33, May, 2007.
7 H. Kakihata, Y. Kataoka, M. Takayama, Y. Matsushima, and Y. Anazawa, "Calculation of Pull-out Torque and Output Characteristics Using Finite Element Method in Surface Permanent Magnet Type Vernier Motor," The Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-11-96, October, 2011.
8 S. Takita, Y. Kataoka, M. Takayama, Y. Matsushima, and Y.Anazawa, "Design of High Torque Surface Permanent Magnet Type Vernier Motor - Effects of Inside Radius on Pull-out Torque in Outer Rotor Type," The Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-11-97, October, 2011.