Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Design of Surface Permanent Magnet-type Vernier Motor

  • Kakihata, Hironori (Dept. of Electronics and Information Systems, Akita Prefectural University) ;
  • Kataoka, Yasuhiro (Dept. of Electronics and Information Systems, Akita Prefectural University) ;
  • Takayama, Masakazu (Dept. of Electronics and Information Systems, Akita Prefectural University) ;
  • Matsushima, Yoshitarou (Dept. of Electrical and Electronic Engineering, Shizuoka University) ;
  • Anazawa, Yoshihisa (Dept. of Electronics and Information Systems, Akita Prefectural University)
  • Received : 2012.11.12
  • Accepted : 2013.01.25
  • Published : 2013.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the authors designed a surface permanent magnet (SPM)-type vernier motor whose maximum output is more than 5.2 kW, whose power factor at 4 kW is more than 90%, and whose efficiency at 4 kW is 85% under the conditions that the operating voltage, frequency, and synchronous speed are 400 V, 50 Hz, and 100 min-1, respectively.

Keywords

References

  1. A. Ishizaki, Y. Shibata, K. Watanabe, and K. Saitoh, "Low-speed High-torque Drive System Applying Vernier Motor Torque," T. IEE Japan, Vol. 111-D, No. 9, pp. 785-793, September, 1991.
  2. A. Ishizaki, T. Tanaka, K. Takasaki, S. Nishikata, and A. Katagiri, "Theory and Torque Characteristics of PM Vernier Motor," T. IEE Japan, Vol. 113-D, No. 10, pp. 1192-1199, October, 1993.
  3. A. Toba, T. Watanabe, Y. Koganei, and H. Ohsawa, "Design and Experimental Evaluation of 5 kW-Surface Permanent Magnet Vernier Machines," T. IEE Japan, Vol. 122-D, No. 2, pp. 162-168, February, 2002.
  4. Y. Anazawa, K. Tajima, A. Kaga, Y. Ito, and H. Isozaki, "Analysis of Vernier Motors Based on the Unified Theory," T. IEE Japan, Vol. 113-D, No. 11, pp. 1317- 1323, November, 1993.
  5. H. Suda, Y. Matsushima, and Y. Anazawa, "A Study of Analysis and Characteristic of Surface Permanent Magnet Vernier Motor," Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-07-33, May, 2007.
  6. S. Takita, Y. Kataoka, M. Takayama, Y. Matsushima, and Y.Anazawa, "Design of High Torque Surface Permanent Magnet Type Vernier Motor - Effects of Inside Radius on Pull-out Torque in Outer Rotor Type," The Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-11-97, October, 2011.
  7. H. Kakihata, Y. Kataoka, M. Takayama, Y. Matsushima, and Y. Anazawa, "Calculation of Pull-out Torque and Output Characteristics Using Finite Element Method in Surface Permanent Magnet Type Vernier Motor," The Papers of the Technical Meeting on Rotating Machinery, IEE Japan RM-11-96, October, 2011.
  8. IEE Japan, "Design of electrical machinery and apparatus," 1982.

Cited by

  1. Operation and Design Principles of a PM Vernier Motor vol.50, pp.6, 2014, https://doi.org/10.1109/TIA.2014.2313693
  2. Analysis of a PM Vernier Motor With Spoke Structure vol.52, pp.1, 2016, https://doi.org/10.1109/TIA.2015.2477798
  3. Characteristic Analysis of a Stator Module Type Vernier Motor vol.27, pp.2, 2019, https://doi.org/10.14243/jsaem.27.194
  4. Improvement of Torque Performance and Energy Density of PM-Type Vernier Motor Utilizing Saddle Coil and Salient Pole vol.11, pp.6, 2021, https://doi.org/10.3390/app11062818