• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.413-420
• /
• 2020

The Tactical Information and Communication Network system provides real-time multimedia services such as voice and data by utilizing the Mobile Subscriber Access Point. At this time, an external transmission path is constructed through the Low Capacity Trunk Radio and the High Capacity Trunk Radio system. The communication devices of each wireless transmission system are mounted on a tactical vehicle and a secondary battery is used to prevent a power interruption when the supply power to the tactical vehicle is transferred to the integrated power control device. In this paper, the basic design of the Wireless Power Transfer device for charging the battery of the integrated power control system of the mobile base station system using the Loading Distribution Method and checking the number of primary windings and the core material selection by the air gap through the Finite Elements Method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.965-968
• /
• 2008

The KS F 2403 method used on domestic sites for checking the compressive strength of a structure, sets the compressive strength of the concrete used in structural specimens as the compressive strength of testing specimens. Under this regulation, the curing method used for testing the specimens must be the standard ponding curing method (20$\pm$2$^{\circ}$C). However, because in-placed concrete is exposed to open air and cured under the seasonal temperature changes, the compressive strength of a real structure is different from the tested compressive strength. (Therefore,) This thesis first identifies the distinct characteristics of the strength development by applying the curing method listed under the KS and used for testing specimens on compressive strength tests; the atmospheric curing method, the sealed curing method, and the structural specimen core strength testing methods used for the in-sites quality checks including reckoning of the compressive strength of the structural specimens and form-demolding period; and the curing method suggested in this research, which sets the internal conditions of the structural specimens as the conditions of the applied curing method. Then, the thesis suggests the specimen curing method that most closely reenacts the compressive strength of the concrete used on the structural specimens

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.251-257
• /
• 2018

Since the tarot is establishing itself as a play culture arousing the fun and curiosity from people, this study is intended to arrange an opportunity for people to have more interest in the beauty by the beauty tarot card. Hereby, the beauty tarot card was interpreted by applying the kabala focusing on the major Arcana card, a core element of the universal weight tarot, which was the basis of the tarot card based on the precedent study. A tool was made that the beauty tarot dot could be used as a counseling method by applying the beauty tarot card to 22 major Arcana after changing 4 elements: fire, water, air, and ground that were basic symbols of universal tarot card into the brush, foundation, eyebrows, and shadow, regarding them as the beauty-related symbol. It is thought that the made beauty tarot card will enable the tarot readers or relevant profession to give beauty-related counsel usefully to people interested in the tarot card. It is expected that the interest and concern for the beauty tarot card heightens, and the tarot cards according with various aesthetic domains such as the makeup, hair, skin, and nail art are produced in the future.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.523-531
• /
• 2012

The performance simulation of a desiccant rotor, which is a core component of a desiccant cooling system, was conducted on the basis of a theoretical solution of the heat and mass transfer process in the rotor. The simulation model was validated by comparing simulation results with experimental data; reasonable agreement was observed. The effect of the rotation speed on the performance of the desiccant rotor was investigated for various operation conditions: temperature (50 to $70^{\circ}C$), humidity ratio (0.01 to 0.02 kg/kg DA), and flow rate of regeneration air. The optimum rotation speed was determined from the maximum moisture removal capacity (MRC) of the desiccant rotor, and it was found to vary with the operation conditions. Further, the correlation for the optimum rotation speed was determined by regression analysis.

• Solar Energy
• /
• v.17 no.1
• /
• pp.47-58
• /
• 1997

The objective of this research was to investigate the enhancement of heat transfer by wire mesh in impinging air jet system at the potential core region. The first experiment was carried out without mesh between nozzle exit and flat plate and the second experiment was done with mesh between them. When mesh was installed in front of the plate, heat transfer has been Increased due to the acceleration between rectangular halls and divided small jet In case clearances are changed, heat transfer comes to maximum under the condition of C=1mm, irrespective of nozzle exit velocity and H/B. Also the average heat transfer enhancement rate of a flat plate with mesh has been increased about 44% at maximum under the condition of U=18m/s, H/B=2 and C=1mm, compared to the result of a flat plate without mesh.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.144-144
• /
• 1999

최근 국내 반도체 기술의 비약적인 발전으로 전자 기기 전반에 소형화, 고주파화, 고기능화 등이 진행되는데 반해, 반도체 소자등에 전원을 공급하거나 회로 전체를 운용하는 전기 신호를 변조.증폭시키는데 반해, 반도체 소자등에 전원을 공급하거나 회로 전체를 운용하는 전기신호를 변조.증폭시키는 인덕터, 트랜스 포머와 같은 수동 자기 소자는 아직도 3차원 벌크 형태로 사용되고 있다. 일본을 중심으로 각국에서는 자기 소자의 박막.소형화에 대한 다각도의 연구가 진행되었으나 국내서는 아직 미미한 실정이다. 따라서 고집적 전원 공급 장치나 지능 센서 등에 반도체와 자기 소자의 사용 주파수 대역과 크기가 통합된 반도체-자성체 IC(semiconductor-magnetic integrated circuit)의 필요성이 절실히 요구되고 있다. 현재 사용중인 벌크형 인덕터나, 트랜스 포머의 경우 10NHz이상의 고주파 대역에는 응용되지 못하고 있다. 이는 적용된 자성체가 페라이트(ferrite)로서 초투자율은 크지만 고주파대역에서의 공진 현상에 의해 저투자율을 나타내고, 포화 자속밀도가 낮기 때문이다. 이러한 페라이트 자성체의 대체품으로 주목받고 있는 것이 Fe, Co계 고비저항 자성마이다. 그러나 Co는 낮은 포화자속밀도를 나타내기 때문에 이러한 조건을 충족시키는 자성막으로 Fe계 미세 결정막을 사용하였다. 본 연구에서는 선택적 전기 도금법(selective electroplating method)과 LIGA like process를 이용하여 공시형 인덕터(air core inductor)의 라이브러리(library)를 구축한 뒤, 고주파 대역에서의 우수한 연자기 특성을 가지는 Ti/FeTaN막을 적용한 자기 박막 인덕터(magnetic thin film inductor)를 제작하여 비교.분석하였다. 제조된 인덕터의 특성 추정은 impedence analyzer를 이용하여 주파수에 따른 저항(resistance), 인덕턴스(inductance)를 측정, 계산한 성능지수(quality factor)로서 인덕터의 성능을 평가하였다. 제조된 박막 인덕터의 코일 형상은 5턴의 double rectangular spiral 구조였으며, 적용된 자성막의 유효 투자율9effective permeability)은 1500, 자성막, 절연막 그리고 코일의 두께는 각각 2$\mu\textrm{m}$, 1$\mu\textrm{m}$, 20$\mu\textrm{m}$이며 코일의 폭은 100$\mu\textrm{m}$, 코일간의 간격은 100$\mu\textrm{m}$였다. 제조된 박막 인덕터는 5MHz에서 1.0$\mu$H의 인덕턴스를 나타내었으며 dc current dervability는 100mA까지 유지되었다.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.196-204
• /
• 2010

Human beings are having suffered from the unexpected climate changes which are caused by global warming leaded from air pollution. More than 3 billions of people will be forced to experience insufficient water in 2015. In Korea, over 70% of precipitation has been concentrating in Summer season. Furthermore, natural disasters has been occurred constantly all over the country. The unusual flood and drought have broken out not only victims but also, property damages. By the natural condition, the effective consuming and controlling system of water is going to be the core business field and constructing dams will be encouraged and promoted for the system. To convince the objectionable against the constructing dams, a dam exhibition center stands the very important position by being responsible for the presenting positive factors and highlighting the beneficial functions. The dam exhibition center is built as complex space combined by information center regarding water resources and visitor center for the community nearby the inundated area. Combined of the different purposes, the dam exhibition center can be confused to understand the concept and contents established in the space. To enhance the visitors' understanding contents of the dam exhibition center, the spatial composition and contents are being analyzed with existing centers and define the most effective exhibition methods between the spaces and visitors. This study will be the basic quantitative analysis data for the following design works those can get the better insight how to make visitors to get information and agreement of constructing dams effectively.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.789-796
• /
• 2006

Context-aware is the core in ubiquitous environment of sensor network to support intelligent and contextual adaptation service. The new context information model is demanded to support context-aware applications. The model should not depend on a specified application and be shareable between applications in the same environment. Also, it should support various context representation and complex context-aware. In this paper, we define the context information according to context-aware process. Also we design the knowledge of domain as well as applications using ontologies and rules. The domain spatial ontology and application knowledge are represented using the spatial object model and the rules of expanded ontologies, respectively. The expression of abundant spatial ontology represents the context information about distance between objects and adjacent object as well as the location of the object. The proposed context information model which is able to exhibit various spatial context and recognizes complex spatial context through the existing GIS. This model shows that it can adapt to a large scale outdoor context-aware applications such as air pollution and prevention of disasters as well as various context-aware applications.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.293-302
• /
• 2020

Capital mobilization is a traditional business of commercial banks and is one of the core foundations for the development of a bank. Capital mobilization is the main input in the operation of a bank, and this is also the basis for generating output for credit activities as well as other banking activities. This study aims to determine the main factors that affect the decisions of individual customers to put savings deposit in Vietnamese commercial banks. Survey data collected from 403 individual customers were analyzed to provide evidence. The results from the multiple regression analysis by using SPSS software revealed that all scales in this study were reliable, and there were six components impacting the savings deposit decision of individual customers from the strongest to the weakest in the following order: the form of promotion, bank brand, service quality, interest rate policy, and employee knowledge and attitude. Besides, the finding showed customers who have high income tend to have a stronger decision on savings deposits in commercial banks. The main findings of this article provide some empirical implications for marketers in banks and serve as a suggestion to improve these factors in order to retain and attract individual customers' savings deposit decisions.