• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.1
• /
• pp.37-43
• /
• 2018

There has been the migration to a performance-based approach in many areas which include transition planning at global, regional and local levels, performance-based navigation and safety management. Achieving continuous success of Air Traffic Management (ATM) systems would require a performance-based approach to raise productivity and efficiency of it through performance measurements and reviews. This paper considers establishment planning of performance measurement and evaluation system for ATM. Related to key performance areas proposed by International Civil Aviation Organization, performance indicators and metrics which could be used to measure and evaluate ATM performance are presented. Also, organizational system and operational planning for efficient operation of ATM are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.360-363
• /
• 2005

Biomimetic actuators composed of cellophane with an electrically conducting polyaniline(PANI) film have been fabricated and tested in air ambience conditions doped with two different counter ions such as perchlorate (${ClO_4}^-$) and tetrafluoroborate (${BF_4}^-$). Fabrication of the trilayer CP//CELLOPHANE//CP substantially enhanced the tip displacement (13.2mm) compared to the small displacement (8.3mm) of the bilaye. CP//CELLOPHANE. The ion migration among layers is the main factor behind the expansion of cellophane, while the expansion/contraction of PANI are dependent on the redox reaction of the polymer. The displacement of the composite is dominated by the humidity content. This implies that the actuation principle is possibly due to the assistance of water existing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.614-617
• /
• 2006

This study investigates the quality control and the finishability improvement properties of durable marine concrete under construct in Geo-je Ka-duk fixed link project. Below $3.5\times10^{-12}m^2/s$ chloride migration coefficient and above 40MPa compressive strength are required for the caisson structure concrete. The quality control was performed from physical-chemical analysis of raw materials to concrete test. Also, the efficiency of vibration type and action interval were tested to remove the entrapped air on the faced to form. And kinds of form and remolding agent were also tested. This paper aim to enhance the practical use of high performance concrete to construction field.

• Biomedical Science Letters
• /
• v.16 no.3
• /
• pp.179-185
• /
• 2010

Benzene is known as a ubiquitous air pollutant and has a carcinogenic influence on the human body. Benzene is also metabolized to other volatile organic compounds (VOCs) in the body such as phenol and hydroquinone (HQ). The metabolites are accumulated and further oxidized by myeloperoxidase in bone marrow. They act as toxic agents and cause a variety of diseases, including cancer, atopic dermatitis and asthma. In this study, we examined the effects of benzene and its metabolites on proliferation, differentiation and chemotaxis of EoL-1 cells, the human eosinophilic leukemia cell line. These chemicals had no effect on the proliferation of EoL-1 cells. Benzene decreased the differentiation of EoL-1 cells induced by butyric acid. HQ was induced the cell death during butyric acid-induced EoL-1 cell differentiation. In a chemotaxis experiment, benzene, phenol and HQ enhanced the cell migration induced by Lkn-1 but not by MCP-1, eotaxin, MIP-$1{\alpha}$ and RANTES. These findings provide the effect of VOCs on the regulation of eosinophil-involved immune response.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.283-293
• /
• 2015

In order to evaluate corrosion resistance of steel fiber-reinforced concrete, accelerated chloride migration and surface resistivity tests were conducted. In addition air content of fresh concrete, compressive strength and water absorption were measured for investigating fundamental characteristics of concrete. Two different water-cement ratios(0.44, 0.5) and three steel fiber contents(0.25%, 0.5%, 1%) were considered as variables. Note that all specimens cast with same compaction work. As a results, corrosion resistance decreased as steel fiber contents increased regardless of water-cement ratio when the concrete was compacted with same amount of work done. However, for concrete with same steel fiber content, the lower water-cement ratio showed the better corrosion resistance. It is found that enhancement of fluidity and enough compaction should be done for corrosion resistance of SFRC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.26-35
• /
• 2019

By operating servers, storage, and networking devices, Data centers consume a lot of power such as cooling facilities, air conditioning facilities, and emergency power facilities. In the United States, The power consumed by data centers accounted for 1.8% of total power consumption in 2004. The data center industry has evolved to a large scale, and the number of large hyper scale data centers is expected to grow in the future. However, as a result of examining the server share of the data center, There is a problem where the server is not used effectively such that the average occupancy rate is only about 15% to 20%. To solve this problem, we propose a Virtual Machine Reallocation research using virtual machine migration function. In this paper, we use meta-heuristic for effective virtual machine reallocation. The virtual machine reallocation problem with the goal of maximizing the idle server was designed and solved through experiments. This study aims to reducing the idle rate of data center servers and reducing power consumption simultaneously by solving problems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.158-160
• /
• 2022

Many office workers spend a lot of time performing repetitive office tasks in inefficient ways. We developed a user-friendly chatbot system based on Kakaotalk to automate repetitive tasks and used the chatbot in the real workplace. In the process of operating the chatbot, if several people use the chatbot at the same time, the server was down or could not respond. To address these issues, we performed code migration of programs used by chatbot back-end servers and tried several ways to improve server performance such as database redesign and load balancing. To determine how much each method affects performance improvement, we measured total request per second and average latency. After that, we proposed ways to improve the problems of using the chatbot in the work environment.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.51-60
• /
• 2010

To determine subglacial topography and internal features of the Fourcade Glacier on King George Island in Antarctica, helicopter-borne and ground-towed ground-penetrating radar (GPR) data were recorded along four profiles in November 2006. Signature deconvolution, f-k migration velocity analysis, and finite-difference depth migration applied to the mixed-phase, single-channel, ground-towed data, were effective in increasing vertical resolution, obtaining the velocity function, and yielding clear depth images, respectively. For the helicopter-borne GPR, migration velocities were obtained as root-mean-squared velocities in a two-layer model of air and ice. The radar sections show rugged subglacial topography, englacial sliding surfaces, and localised scattering noise. The maximum depth to the basement is over 79m in the subglacial valley adjacent to the south-eastern slope of the divide ridge between Fourcade and Moczydlowski Glaciers. In the ground-towed profile, we interpret a complicated conduit above possible basal water and other isolated cavities, which are a few metres wide. Near the terminus, the GPR profiles image sliding surfaces, fractures, and faults that will contribute to the tidewater calving mechanism forming icebergs in Potter Cove.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.117-124
• /
• 2020

In this paper, we proposed a plan to maintain comfortable indoor air quality in nursing homes by suggesting ways to reduce items temporarily exceeding the reference values through real-time concentration variation analysis of indoor air quality. Five items including PM10, CO₂, CO, VOC, and Radon are measured at nursing homes in spring (April) and autumn (September) was carried out and all of the measured items were analyzed to satisfy the criteria set by the Indoor Air Quality Control Act. As a result of the analysis of the real-time concentration change, the concentration of CO₂ was close to the reference value based on the number of occupants in the sick room. Due to the disinfectant (alcohol) used to disinfect and the auxiliary tools (adhesive) used in the operation of the program such as making and coloring, it was analyzed to temporarily exceed the standard value in the hall. In conclusion, it is possible to provide pleasant indoor air quality and contribute to securing the nursing home's competitiveness if periodic ventilation, natural disinfectant and eco-friendly product are used in consideration of the thermal environment.