• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.285-290
• /
• 2021

The existing aiming inspection use foreign-made aiming inspection equipment. However, the quantity is insufficient and the difficult to maintain. So it takes a lot of time to inspect the target. This system can reduces the time of aiming inspection and be maintained and distributed smoothly because it is a domestic product. In this paper, we develop a system that can detect targets and monitor shooting results through a target detection deep learning model. The system is capable of real-time detection of targets and has significantly increased the identification rate through several preprocessing of distant targets. In addition, a graphical user interface is configured to facilitate user camera manipulation and storage and management of training result data. Therefore the system can replace the currently used aiming inspection equipment and non-fire training.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1335-1344
• /
• 2010

Urban railroad is the central axis of public transportation which transport the citizens quickly and safely. The idea of the maintenance of urban railroad cars is preventive maintenance aiming at breakdown prevention, and it should be performed conforming to the fixed regulations and maintenance guide. The accuracy of maintenance and the punctuality of rolling stock operation could be secured by reliable inspection equipments. In this study, a scientific maintenance and safe operation of rolling stocks & a method of improving work efficiency will be examined through the case that Busan Urban Railroad has developed its own vehicle inspection equipment and has been making good use of it.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2348-2356
• /
• 2021

As a relatively new radiation imaging method, the cosmic-ray muon scattering imaging technology can be used to prevent nuclear smuggling and is of considerable significance to nuclear safety. Proposed in this paper is a new reconstruction algorithm based on density clustering, aiming to improve inspection quality with better performance. Firstly, this new algorithm is introduced in detail. Then in order to eliminate the inequity of the density threshold caused by the heterogeneity of the muon flux in different positions, a new flux correction method is proposed. Finally, three groups of simulation experiments are carried out with the help of Geant4 toolkit to optimize the algorithm parameters, verify the correction method and test the inspection quality under shielded condition, and compare this algorithm with another common inspection algorithm under different conditions. The results show that this algorithm can effectively identify and locate nuclear material with low misjudging and missing rates even when there is shielding and momentum precision is low, and the threshold correcting method is universally effective for density clustering algorithms.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.136-149
• /
• 2007

This study researched the costume manufacture process by having the musical 'Christmas Carol' as an example and specifically presented the costume manufacture process of an actually performance work, thus it aimed to be helpful theoretically and realistically, by allowing theatrical costume manufacturers and majors in theatrical costume to be informed of the systematically practical affair process of the theatrical costume manufacture and by exhibiting the research work of costume composition aiming at reproducing a silhouette in the process such as costume composition and sewing, and the effectively manufacturing methods such as the costume composition application and the sewing method development aiming at the activity of performers. In the empirical research, it analyzed the features of characters and arranged the manufacture points while actually manufacturing the performance costume, and clarified the systematically performance costume manufacture process such as a manufacture meeting${\rightarrow}$costume list preparation$\rightarrow$work-instruction sheet preparation$\rightarrow$pattern manufacture$\rightarrow$sewing$\rightarrow$performance and inspection. Through performing the manufacture of the really performance work, it is hoped that this study contributes to the development of performance art circles, by presenting a step and a method of professionally theatrical costume to the performance manufacturers and the theatrical costume manufacturers at present when the theatrical costume is solidifying its position as a professional sphere, in the performance and an, has a meaning as the initially empirical research, which can exhibit as a guide of realistically and empirically educational contents for theatrical costume aiming to bring up professional staff for theatrical costume, and becomes help in the efficiently theatrical costume manufacture realistically.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.74-79
• /
• 2013

Aiming at reducing deaths and injuries involving construction crane operations, OSHA has recently updated its 40-year-old crane safety standards with new rules addressing the use of cranes and derricks in construction. The goal of this change in rule is to deal with the leading causes of fatalities related to crane and derrick operations. Employers in the construction industry are mandated to ensure that employees in the work zone are trained to recognize hazards associated with the use of the equipment and any related duties that they are assigned to perform. However, those responsible at construction sites for the supervision and management of safe crane operations often lack the integrated knowledge of the standards, regulations and best practices for conducting or supervising daily, monthly, or quarterly inspection of cranes. As such, proper planning, management and implementation of crane operations, including inspections are just as paramount to reducing accidents on the construction site. It is important that engineers responsible for the management and planning of crane operations understand the latest OSHA crane and hoisting standards to ensure a safer work environment is maintained. Many on site engineers overseeing crane operations do not have adequate training, experience, and knowledge of the inspection requirements to assess safe crane operation and too often rely on the crane operator's judgement. This paper highlights recent research effort in defining significant changes in new crane and hoisting standards and provides basis for safety construction operations.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• Korean Security Journal
• /
• no.17
• /
• pp.69-89
• /
• 2008

As year passes, terrorism is gradually increasing. Its target has becom various and arbitary, and recently, terrorists are aiming for national major facilities wich include multiplex facilities. Although special security guards took charge of its defence system from 2002, they have failed to establish its system firmly due to some institutional inertia. And 'Professionalism' appeared to be the mattter, according to the spot-probe and interviews. The purpose of this essay is to devise measures to develop sepecial security system including its specialization through investigating current educational training system. In order to attain professionalism, establishment of new proffessional school, division of current education system(into common education and full-course education), and reinforcement of substantial inspection activity should be preceded. Moreover, inspection activity should include standards for engaging instructors, establishment of compilation committee for editorial supervision, and establishment of clear educational policy. I hope the developmental measures in this essay to be speedily actualized with endeavor from police, security association, academic circles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.129-136
• /
• 2012

Temperature of fresh concrete can be effectively used to predict the strength of concrete being cured and make an informed decision for stripping the molds. A hygrothermograph and thermo-couple sensors that require an extensive wiring have been applied to measure a temperature of concrete at the early stage of the curing process on site. However, these methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. Therefore, this study is aiming at developing a device based on wireless sensor network to measure the temperature of concrete being cured in formwork. The result showed that the wireless sensor with probe type thermistor which is developed had the same temperature data compared to the existed wire type thermistor, and we confirmed the temperature history of concrete in real time for 28 days throughout the gateway by wireless network that collects the temperature data measured from specimens in laboratory. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. If the wireless sensor network device developed uses in the field, the temperature management of concrete will be systematically conducted from at the early stage of the curing, and especially be effective for cold weather concrete construction. In addition, it will contribute to the establishment of advanced quality control system for concrete and productivity of supervisors on site will be increased in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.221-231
• /
• 2011

Thinner and lighter structural members can be designed by utilizing the high stiffness and toughness, and high compressive strength of UHPC(ultra high performance concrete), which reaches up to 200MPa. The punching shear capacity of UHPC was investigated in this paper aiming for the application of UHPC to bridge decks. Six square slabs were fabricated and punching shear test was performed under fixed boundary condition. Different thicknesses of test slabs, which were 40mm and 70mm, were selected. The shape ratio of loading plates were ranged between 1.0~2.5. 40mm thickness slabs showed longer softening region after the peak load and, on the other hand, 70mm thickness slabs revealed a more brittle shear failure. Experimental results were analyzed using various existing punching shear predicting equations. Ductal$^{(R)}$ equation and JSCE equation better predicted for 40mm slabs, and Harajli et al. equation and ACI-Ductal$^{(R)}$ equation better suited for 70mm slabs. Nevertheless generally they didn't well predict the test results. A new punching shear equation which was derived based on the actual failure mechanism was proposed. The proposed equation appeared to better predict the punching shear strength of UHPC than other available equations.

• Tunnel and Underground Space
• /
• v.17 no.4
• /
• pp.285-294
• /
• 2007

Material properties of geomaterials are usually heterogeneous. And the limitted number of investigation for the subsurface material properties in terms of boreholes are not sufficient enough for identifying the heterogeneity. In most civil engineering work, pre-investigation results can be different from those by in-situ inspection during the construction work. With these points of view, a new analysis concept aiming to evaluate the uncertainty resulted from the heterogeneity of the geomaterial properties as well as to enhance a construction workability and design qualify by a prompt feedback of in-situ conditions was proposed. It was accomplished by linking the Element Free analysis and pre-developed stochastic methods represented by Karhunen-Loeve expansion. Simple ID problem was solved by the developed method, and its validity as well as the characteristic results by different stochastic methods were clarified.