• 한국염색가공학회지
• /
• 제7권2호
• /
• pp.32-39
• /
• 1995

Various grades of hydroxyethyl cellulose (HEC, MS 0.65-3.20) were prepared throngh reaction of the knit-cotton-waste with ethylene oxide(EO). The knit-cotton-waste was composed of 98% of $\alpha$-cellulose and 2% of other components, and the cellulose was highly pure. The molar ratio of EO to knit-cotton-waste and that of NaOH to knit-cotton-waste, and the agitation speed were the important factors determining the molar substitution(MS) during the preparation of HEC. The MS of HEC was remarkably increased with increasing molar ratio of EO' to knit-cotton-waste. When the molar ratio of EO to knit-cotton-waste was 3.5, that of NaOH to knit-cotton-waste was 1.25, and agitation speed was 450rpm, it was possible to prepare HEC of MS 2.5. The structure and crystallinity of HECs prepared were determined by FT-IR and X-ray diffraction.

• 동의신경정신과학회지
• /
• 제17권3호
• /
• pp.117-129
• /
• 2006

Insomnia is one of the most common clinical symptom those almost patients with neuropsychiatric disorder complain. and the most common cause of insomnia in neuropsychiatric disorder is the major depressive disorder. We experienced a 59 year-old male who complained of recurrent insomnia in spite of taking medicines(nervines, antidepressants, etc,) during 30 years. We had given herbal medicine, acupuncture treatment and aroma therapy with continuing medications. The patient had several sypmtoms as anxiety, agitation, feeling thirsty, chronic constipation, and etc. beside the insomnia. After the patient took the herbal medicine, especially Sam-Hwang-Sa-Sim-Tang, he could have a sound sleep and be relaxed. In this case, we concluded that oriental medical treatment can be an effective remedy of chronic insomnia that responds to neuropsychiatric medications incompletely and Sam-Hwang-Sa-Sim-Tang is effective to a kind of insomnia with agitation, anxiety, thirsty, constipation, and etc.

• 공업화학
• /
• 제5권2호
• /
• pp.223-229
• /
• 1994

회분식 추출기를 이용하여 구연산-초산 혼합수용액-n-butylacetate계에서 2급 아민 추출제인 DITDA와 용매화 추출제인 MOHPO를 이용 추출시 물질전달계수에 미치는 교반속도의 영향에 대하여 연구하였다. 실험결과 본 추출장치에서 교반속도가 커질수록 추출도는 증가하였고, 교반속도가 200rpm, 교반시간 30분 정도가 가장 좋은 결과를 얻었다. 또한 구연산-초산 혼합수용액에서 추출제로 2급 아민인 DITDA을 사용했을 경우 추출도가 더 높았다. 물질전달계수는 추출도와 비례함을 알았고, 구연산을 DITDA로 추출시 추잔상측 물질전달계수와 Re수와는 $K_r=1.254{\times}10^{-3}Re^{0.536}$이었다.

• 한국주조공학회지
• /
• 제13권6호
• /
• pp.524-531
• /
• 1993

Dispersion behaviors of SiC particles and microstructures in Al-2%Si/SiCp composite prepared by Rheo-compocasting were studied with change of fabrication conditions(slurry temperature, agitation time) and additions of Mg($0{\sim}3wt.%$). Also, the microhardness change of matrix, interface and total in composites were examined with additions of Mg($0{\sim}3wt.%$). The dispersion of particles in the composites became relatively homogeneous with increase of Mg additions, agitation time and decrease of slurry temperature. Rate of occupied area by particle in matrix was increased as increase of Mg additions due to improvement of wettability between SiC particle and matrix. A favorable composites were obtained by melting under Ar atmospheric SiCp injection and bottom pouring system. According to the analysis of X-ray diffraction, $Mg_2Si$, $Al_4C_3$, $SiO_2$ and MgO, etc, intermetallic compounds were formed by chemical interreaction at interface of matrix and particles. The microhardness of interface is higher than that of matrix due to more strengthening of above intermetallic compounds. It was considered that the total hardness of the composites is improved by dispersing of SiCp and addition of Mg.

• KSBB Journal
• /
• 제17권4호
• /
• pp.396-402
• /
• 2002

바이오디젤(지방산 메틸 에스테르)은 생분해성, 무독성, 그리고 재생연료로서 지난 10여년간 많은 관심을 끌고 있다. 바이오디젤을 생산하기 위해 다양한 방법들이 개발되었는데, 그 중 알칼리 촉매를 이용한 에스테르화 반응이 짧은 시간동안 높은 수율을 얻을 수 있다. 따라서 본 연구에서는 알칼리 촉매하에 에스테르화 반응의 최적조건을 찾기 위하여 response surface method를 사용하였다. 결과적으로 바이오디젤 생산 공정에 영향을 주는 7개의 변수 중 반응온도, 반응시간, 그리고 교반속도가 중요했는데 이들의 최적 값은 각각 67$^{\circ}C$, 68분, 94 rpm이었다. 이와같은 최적인 조건하에서 실험한 결과 바이오디젤로의 전화율은 99.7%이었다.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.43-52
• /
• 2001

This study was conducted to obtain granular crystalline gypsum that can be used as raw material for Plaster boards or cements from waste Plaster board. Gypsum could be Preferentially disintegrated to gypsum needle in $10\mu\textrm{m}$ or less size by hydration after the dehydration of crushed waste Plaster board. The finer the gypsum needle, it is easier to remove coarse impurities and to recover the gypsum needle. The optimum conditions for obtain the finer gypsum size were dehydration rate of 75~85%, solid concentration at hydration of 10~15%, agitation speed of 250~400 rpm, crushing size before dehydration of 2 cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield as the undersize of 325 mesh wet screening followed by the dehydration-hydration process performed at the conditions of dehydration rate of 80%, solid concentration at hydration of 15%, agitation speed of 300 rpm, crushing size before dehydration of 2 cm or less. After the recrystallization of recovered gypsum, Plate-like gypsum of $151\mu\textrm{m}$ size with 99.49% grade was obtained as the oversize of 270 mesh in a wet screening.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.104-109
• /
• 2003

A microcellular, which combines a rubber with the conventional formulation of styrene/divinylbenzene/sorbitan monooleate/water system, was prepared using high internal phase emulsion (HIPE) polymerization. Although the open microcellular foam with low density from the conventional HIPE polymerization shows highly porous characteristics with fine, regular and isotropic structure, the one having much smaller cell size is desirable for various applications. In this study, a polybutadiene was introduced to reduce the cell size with comparable properties. Major interests were focused on the effects of rubber concentration and agitation speed on the cell sizes and compression properties. Scanning electron microscopy was used to observe the microcellular morphology and compression tests were conducted to evaluate the stress-strain behaviors. It was found that the cell size decreased as rubber concentration increased, reflecting a competition between the higher viscosity of continuous phase and the lower viscosity ratio of dispersed to continuous phases due to the addition of high molecular weight rubber into the oil phase of emulsion. A correlation for the average cell size depending on agitation speed was attempted and the result was quite satisfactory.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.

• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.560-564
• /
• 2013

${\small{D}}$-Ribose is a value-added five-carbon sugar used for riboflavin production. To investigate the effects of oxygen supply and mixed sugar concentration on microbial production of ${\small{D}}$-ribose, a transketolase-deficient Bacillus subtilis SPK1 was cultured batch-wise using xylose and glucose. A change of agitation speed from 300 rpm to 600 rpm at 1 vvm of air supply increased both the xylose consumption rate and ${\small{D}}$-ribose production rate. Because the sum of the specific consumption rates for xylose and glucose was similar at all agitation speeds, metabolic preferences between xylose and glucose might depend on oxygen supply. Although B. subtilis SPK1 can take up xylose and glucose by the active transport mechanism, a high initial concentration of xylose and glucose was not beneficial for high ${\small{D}}$-ribose production.

• 한국표면공학회지
• /
• 제35권1호
• /
• pp.17-32
• /
• 2002

Electroplating methods by molten salts and non-aqueous melts were employed for aluminium coating on STS 316L stainless steel. After coated with Ni or non-coated surface on stainless steel, Al pulse plating was carried out in two different types of electrolytes at room temperature. The Al layer from $AlCl_3$-TMPAC melts could not obtain appreciable thickness for engineering application due to chemical reactions between deposits and moisture of air. However, The Al coating by pulse plating in the Ethylbenzene-Toluene-$AlBr_3$ systems was found to be solid coating layer with a few $\mu\textrm{m}$ scale. The conductivity of Ethylbenzene-Toluene-$AlBr_3$ electrolyte was as functions of time and agitation. By seven days exposure after mixing of the electrolyte, Al-deposited layer shows uniform and near by pore-free with high current density (higher than 30mA/$\textrm{cm}^2$). The roughness and imperfection of coating layer were decreased with a increasing agitation speed. It was found that the optimum condition for the Al pulse plating on the 316L stainless steel was a 400mA peak current, duty cycle, $t_{on}$ $t_{ off}$=3ms/1ms, and a current density of 30mA/$\textrm{cm}^2$.