• 제목/요약/키워드: AgI

검색결과 725건 처리시간 0.035초

유연기판을 이용한 고효율 나노결정질 실리콘 박막 태양전지 제조 (Fabrication of Highly Efficient Nanocrystalline Silicon Thin-Film Solar Cells Using Flexible Substrates)

  • 장은석;김솔지;이지은;안승규;박주형;조준식
    • Current Photovoltaic Research
    • /
    • 제2권3호
    • /
    • pp.103-109
    • /
    • 2014
  • Highly efficient hydrogenated nanocrystalline silicon (nc-Si:H) thin-film solar cells were prepared on flexible stainless steel substrates using plasma-enhanced chemical vapor deposition. To enhance the performance of solar cells, material properties of back reflectors, n-doped seed layers and wide bandgap nc-SiC:H window layers were optimized. The light scattering efficiency of Ag back reflectors was improved by increasing the surface roughness of the films deposited at elevated substrate temperatures. Using the n-doped seed layers with high crystallinity, the initial crystal growth of intrinsic nc-Si:H absorber layers was improved, resulting in the elimination of the defect-dense amorphous regions at the n/i interfaces. The nc-SiC:H window layers with high bandgap over 2.2 eV were deposited under high hydrogen dilution conditions. The vertical current flow of the films was enhanced by the formation of Si nanocrystallites in the amorphous SiC:H matrix. Under optimized conditions, a high conversion efficiency of 9.13% ($V_{oc}=0.52$, $J_{sc}=25.45mA/cm^2$, FF = 0.69) was achieved for the flexible nc-Si:H thin-film solar cells.

12Cr 강의 이동 화염경화 공정 특성 (Characteristics of Flame Hardening Process for 12Cr Steels)

  • 김광호;이민구;김경호;김흥회;이창규;김길무
    • 한국표면공학회지
    • /
    • 제39권2호
    • /
    • pp.49-56
    • /
    • 2006
  • In this study, the movable flame hardening process of 12Cr steel for a uniform hardness and desirable residual stress have been investigated. For this, the temperature cycles have been controlled accurately as a function of the three processing variables, the flame intensity $I_f$, the scanning velocity $V_s$, and the initial flame holding time $t_h$, where the standard surface temperature $T_{s,\;max}$, was maintained at $960^{\circ}C$. The optimized conditions were $V_s=0.68mn/s\;and\;t_h=67sec$ for the $C_3H_8:O_2\;=\;5:20l/min,\;V_s=0.80mm/s$ and $t_h=56sec$ for the $C_3H_8:O_2=6:24l/min,\;V_s=1.01mm/s\;and\;t_h=48sec$ for the $C_3H_8:O_2=7:28l/min,\;and\;V_s=1.15mm/s$ and $t_h=39sec$ for the $C_3H_8:O_2$=8:32 l/min. The optimally flame-hardened surface exhibited uniform distributions of the hardness and residual compressive stress over the treated area with moderate levels of $470{\sim}490HV_{0.2}$in hardness and $-300{\sim}-450MPa$ in residual stress, which were acceptable on the basis of the acceptance criteria of Siemens AG-KWU and GE Power Generation Engineering.

Novel Silver(I) Ion Selective PVC Membrane Electrode Based on the Schiff Base (N2E,N2'E)-N2,N2'-Bis(Thiophen-2-ylmethylene)-1,1'-Binaphthyl-2,2'-Diamine

  • Jeong, Eunseon;Ahmed, Mohammad Shamsuddin;Jeong, Hae-Sang;Lee, Eun-Hee;Jeon, Seung-Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권3호
    • /
    • pp.800-804
    • /
    • 2011
  • A potentiometric sensor based on the Schiff base $(N^2E,N^{2'}E)-N^2,N^{2'}$-bis(thiophen-2-ylmethylene)-1,1'-binaphthl-2,2'-diamine has been synthesized and explored as an ionophore PVC-based membrane sensor selective for the silver ($Ag^+$) ion. Potentiometric investigations indicate a high affinity of this receptor for the silver ion. Seven membranes have been fabricated with different compositions, with the best performance shown by the membrane with an ionophore composition (w/w) of: 1.0 mg, PVC: 33.0 mg, DOA: 66.0 mg in 1.0 mL THF. The sensor worked well within a wide concentration range of $1.0{\times}10^{-2}$ to $1.0{\times}10^{-7}$ M, at pH 5, at room temperature (slope 57.4 mV/dec.), and with a rapid response time of 9 s; the sensor also showed good selectivity towards the silver ion over a huge number of interfering cations, with the highest selectivity coefficient for $Hg^{2+}$ at -3.7. Thus far, the best lower detection limit was $4.0{\times}10^{-8}$ M.

당뇨유발 흰쥐에서 당수송 인자와 AMP-Activated Protein Kinase의 조절에 대한 데커신과 데커시놀 안젤레이트의 효과 (Glucose Transporters and AMP-Activated Protein Kinase Modulation Effects of Decursin and Decursinol Angelate on Diabetic Rats)

  • 옥선;이주희;김익환;강재선
    • 약학회지
    • /
    • 제55권4호
    • /
    • pp.301-308
    • /
    • 2011
  • Diabetes has been one of major health risks in industrialized countries. AMP-activated protein kinase (AMPK) has been focused as a novel therapeutic target for the treatment of metabolic syndromes, because AMPK increases glucose uptake through independent insulin signal pathway. In this study, we investigated the anti-diabetic effect of Angelica gigas Nakai extract (AGNEX), a mixture of decursin and decursinol angelate (53 : 47), decursin and decursinol angelate on blood glucose, glucose transport (GLUT) and AMPK expression levels in streptozotocin (STZ)-induced diabetic rats. To induce diabetes, 50 mg/kg of STZ was injected via i.v. route and AGNEX 2 mg/kg (STZ+AG), decursin 2 mg/kg (STZ+D), decursinol angelate 2 mg/kg (STZ+DA), and metformin 100 mg/kg (STZ+M) were administered orally for 21 days. STZ+DA group showed a significant decrease in fasting blood glucose levels compared to the other groups. Decursinol angelate significantly upregulated expression of glucose transporter 4 (GLUT4) and phosphorylation of AMPK (p-AMPK) in skeletal muscle of rats. In pancreas of rats, decursinol angelate significantly increased expression of GLUT2 through down-regulation of p-AMPK. In addition to the result of pancreatic islets morphology, AGNEX, decursin, decursinol angelate, and metformin treated group recovered ${\beta}$-cell damage by hyperglycemia. These results indicate that decursinol angelate might be a potential anti-diabetic agent and AGNEX could be useful in the treatment of diabetes mellitus.

노다케닌의 항 알러지 효과 (Anti-Allergic Effects of Nodakenin in IgE/Ag-Induced Type I Hypersensitivity)

  • 김용재;박세진;김택중
    • 생명과학회지
    • /
    • 제21권12호
    • /
    • pp.1721-1725
    • /
    • 2011
  • 현재 전 세계적으로 알러지 질환은 급격히 증가하고 있는 추세이다. 기존의 길항제나 항원 특이적 면역 치료법의 부작용으로 인하여 항 알러지 작용에 효과적인 천연 기능성 물질에 대한 연구가 알러지 질환 치료의 유망한 분야로 여겨지고 있다. 비만세포는 히스타민이나 아라키돈 산, 그리고 전 염증성 사이토카인 등을 방출하는 알러지 반응에 주요하게 작용하는 효과세포이다. 우리는 참당귀의 뿌리로부터 추출한 노다케닌의 알러지 반응 억제효과에 대해서 연구하였다. 노다케닌을 이용하여 비만세포에서의 탈 과립현상 억제 효과를 측정한 결과, 비만세포에서 노다케닌이 탈과립의 표지인 ${\beta}$-hexosaminidase의 방출량을 농도 의존적으로 억제하는 것을 관찰하였고, 이러한 탈과립 억제 현상이 다양한 사이토카인 중 IL-4과 TNF-${\alpha}$의 양을 감소시킴으로써 매개된다는 사실을 RT-PCR을 통해 확인하였다. 또한 쥐에서 수동피부과민반응을 유도하여 노다케닌을 경구투여 했을 때 알러지성 과민반응 증상을 효과적으로 억제하는 것을 관찰하였다. 결과적으로, 이러한 결과들은 노다케닌이 항 알러지 약물의 개발에 잠재적인 후보물질이 될 수 있음을 시사한다.

Purification and Characterization of NADPH-Dependent Cr(VI) Reductase from Escherichia coli ATCC 33456

  • Bae, Woo-Chul;Lee, Han-Ki;Choe, Young-Chool;Jahng, Deok-Jin;Lee, Sang-Hee;Kim, Sang-Jin;Lee, Jung-Hyun;Jeong, Byeong-Chul
    • Journal of Microbiology
    • /
    • 제43권1호
    • /
    • pp.21-27
    • /
    • 2005
  • A soluble Cr(VI) reductase was purified from the cytoplasm of Escherichia coli ATCC 33456. The molecular mass was estimated to be 84 and 42 kDa by gel filtration and SDS-polyacrylamide gel electrophoresis, respectively, indicating a dimeric structure. The pI was 4.66, and optimal enzyme activity was obtained at pH 6.5 and $37^{\circ}C$. The most stable condition existed at pH 7.0. The purified enzyme used both NADPH and NADH as electron donors for Cr(VI) reduction, while NADPH was the better, conferring 61% higher activity than NADH. The $K_m$ values for NADPH and NADH were determined to be 47.5 and 17.2 umol, and the $V_max$ values 322.2 and 130.7 umol Cr(VI) $min^{-1}mg^{-1}$ protein, respectively. The activity was strongly inhibited by N-ethylmalemide, $Ag^{2+},\;Cd^{2+},\;Hg^{2+}$, and $Zn^{2+}$. The antibody against the enzyme showed no immunological cross reaction with those of other Cr(VI) reducing strains.

광유도도금을 이용한 스크린 프린팅 결정질 실리콘 태양전지의 효율 향상 (Efficiency Improvement in Screen-printed Crystalline Silicon Solar Cell with Light Induced Plating)

  • 정명상;강민구;장효식;송희은
    • 한국전기전자재료학회논문지
    • /
    • 제26권3호
    • /
    • pp.246-251
    • /
    • 2013
  • Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

원심 용융 성형공정으로 제조된 BSCCO 튜브의 전기적 특성 (Electronical Property of BSCCO Tube Fabricated by Centrifugal Melting Process)

  • 최정숙;오성룡;전병혁;김혜림;현옥배;김형섭;김찬중
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.267-267
    • /
    • 2006
  • 전력에 큰 손실을 초래하는 고장전류를 차단하기 위한 한류기(FCL) 소재로서 고온 초전도체인 BSCCO 2212가 사용된다. 고온에서 용융된 BSCCO 2212 분말은 원심성형법에 의해 한류기용 튜브로 제조되었다. BSCCO 튜브의 기계적 특성을 높이고 용융온도를 낮추기 위해 $SrSO_4$(10wt-%)를 첨가하였다. 용탕은 $1200^{\circ}C$에서 완전히 용융되어 금속 몰드로 주입되었고 원심성형에 사용되는 금속 몰드는 $550^{\circ}C$ 온도로 2시간 예열 후 1020 ~ 2520 RPM으로 회전시켰다. 원심력에 의해 성형된 BSCCO 튜브는 약 48시간 동안 로에서 서냉 후 금속 몰드로부터 분리하였다. 튜브의 용이한 분리를 위해 이형제로서 BSCCO 2212 powder를 사용하였고 임계전류측정을 고려하여 Ag tape 단자를 튜브 끝단에 부착하였다. BSCCO 제조 공정에 있어서 몰드의 예열온도, 용융온도, 몰드 회전속도 등의 변수를 조절하여 최적의 조건을 확립하였다. 제조한 BSCCO 튜브의 임계전류($I_c$)와 임계전류밀도($J_c$)는 77K에서 536A와 $205A/cm^2$ 이었다. 본 연구에서는 BSCCO 2212 튜브를 제조하는 공정조건 변화와 각 조건에서 제조된 BSCCO 2212 튜브의 전기적 특성 및 그에 따른 분석에 대해 기술하였다.

  • PDF

Chlamydia trachomatis 진단에 유용한 단세포군 항체 생산에 관한 연구 (Production of Monoclonal Antibody to Chlamydia Trachomatis)

  • 최태열;김신규;김춘원;김기홍;황응수;차창룡;김광혁
    • 대한미생물학회지
    • /
    • 제22권3호
    • /
    • pp.197-208
    • /
    • 1987
  • Chlamydia trachomatis has now shown that this interesting intracellular parasite is a cause of nongonococcal urethritis, infantile pneumonia, pelvic inflammatory disease and epididymitis, in addition to lymphogranuloma venerum and inclusion conjunctivitis. There are several diagnostic methods for C. trachomatis, but the method using monoclonal antibody is the most sensitive and specific. The hybride cell were prepared by fusion of myeloma cell($P_3X_{63}\;Ag_8{\cdot}V_{653}$) of mouse and lymphocyte of mouse(BALB/c) that were immunized with formalin killed C. trachomatis serotype D. The cell mixtures after fusion were dispensed into 640 wells of the 96 well culture plates and continuously cultured in HAT medium for 2 weeks. The supernatants of culture media in 83(13%) wells were reacted with C. trachomatis, which were determined by enzyme-linked immunosorbent assay in 96 well microplate. The clones that secreted antibody to C. trachomatis were cloned by limiting dilution. Only six monoclones secreted antibody to C. trachomatis. The antibody titer of ascitic fluid that collected from same BALB/c mice bearing hybridoma cells was above 1:100,000. These monoclonal antibodies that were IgG reacted with elementary and reticulate bodies of all serotypes(Ba, D, E, F, G, H, J and LGV type-I) using ELISA and indirect immunofluorescence stain, but there were no cross reaction with other bacteria(coagulase negative Staphylococcus, Proteus and E. coli). We concluded these six monoclones secreted the same monoclonal antibody to C. trachomatis. The sensitivity and specificity of the monoclonal antibody compared with Microtrak(confirmatory test of C. trachomatis, Syva) was 100%, respectively.

  • PDF

천식 모델 생쥐에서 반하(半夏)의 CD4+CD25+ 조절 T 세포 상승 및 CD3+CCR3+Th2 세포 침윤 억제 효과 (A Therapeutic Effect of Pinellia Ternata via the Increase of CD4+CD25+ Regulatory T Cells and the Suppression of CD3+CCR3+ Cellular Infiltration During Allergic Airway Inflammation)

  • 이영철
    • 대한본초학회지
    • /
    • 제24권1호
    • /
    • pp.73-78
    • /
    • 2009
  • Objectives : In this study, we studied the effect of Pinellia Ternata (PT) on regulatory T cells and CD3+CCR3+ Th2 cells number in asthma model mice. Methods : All mice were immunized on two different days (21 days and 7 days before inhalational exposure) by i.p. injections of 0.2 $m\ell$ alum-precipitated Ag containing 100 ${\mu}g$ of OVA bound to 4 mg of aluminum hydroxide in PBS. Seven days after the second sensitization, mice were exposed to aerosolized ovalbumin for 30 min/day on 3 days/week for 12 weeks(at a flow rate of 250 L/min, 2.5% ovalbumin in normal saline) and PT (400, 200 mg/kg) were orally administered 3 times a week for 8 weeks. After C57BL/6 mice were orally given of PT, the percentages, cell numbers, phenotype and function of CD4+CD25+Treg cells were determined by flow cytometry. Results : The cell numbers of CD4+CD25+Treg cell subsets were markedly increased in PT treated mice as reported. However, PT significantly reduced the CD3+CCR3+ Th2 cells in PBMC and lung of mice. Conclusions : These results indicate that PT has a deep inhibitory effect on asthma model mice by increase the number of regulatory T cells, and by reducing CD3+CCR3+ Th2 cells.