• 대기
• /
• 제14권2호
• /
• pp.11-22
• /
• 2004

A technique on atmospheric correction algorithm to the multi-band reflectance of Landsat TM imagery has been developed using an atmospheric radiation transfer model for eliminating the atmospheric and surface diffusion effects. Despite the fact that the technique of satellite image processing has been continually developed, there is still a difference between the radiance value registered by satellite borne detector and the true value registered at the ground surface. Such difference is caused by atmospheric attenuations of radiance energy transfer process which is mostly associated with the presence of aerosol particles in atmospheric suspension and surface irradiance characteristics. The atmospheric reflectance depend on atmospheric optical depth and aerosol concentration, and closely related to geographical and environmental surface characteristics. Therefore, when the effects of surface diffuse and aerosol reflectance are eliminated from the satellite image, it is actually corrected from atmospheric optical conditions. The objective of this study is to develop an algorithm for making atmospheric correction in satellite image. The study is processed with the correction function which is developed for eliminating the effects of atmospheric path scattering and surface adjacent pixel spectral reflectance within an atmospheric radiation model. The diffused radiance of adjacent pixel in the image obtained from accounting the average reflectance in the $7{\times}7$ neighbourhood pixels and using the land cover classification. The atmospheric correction functions are provided by a radiation transfer model of LOWTRAN 7 based on the actual atmospheric soundings over the Korean atmospheric complexity. The model produce the upward radiances of satellite spectral image for a given surface reflectance and aerosol optical thickness.

• 대한화학회지
• /
• 제34권6호
• /
• pp.555-560
• /
• 1990

$YBa_2Cu_3O_{7-x}$ 초전도 필름을 초음파에 의한 aerosol spray 법을 이용하여 YSZ (yttria stabilized zirconia) 및 SrTi$O_3$의 (100) 결정면 위에 만들었다. 초전도상은 세 단계의 과정을 거쳐서 형성되었다 : (가) 이트륨, 바륨, 구리의 질산염을 화학 양론비로 섞어 만든 용액을 250$^{\circ}C$로 가열된 기질에 분무하여, (나) 형성된 필름을 공기 중에서 550$^{\circ}C$로 예열하고, (다) 흐르는 산소 분위기에서 950$^{\circ}C$로 소결한 뒤 노냉하였다. 필름의 저하을 dc four-point probe 법으로 측정하여 액체질소 온도 이상에서 초전도성을 확인하였다.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.129-132
• /
• 2007

Bismuth-substituted yttrium iron garnet (Bi:YIG, $Bi_{0.5}Y_{2.5}Fe_5O_{12}$) films were deposited with aerosol deposition method and their magnetic and optical properties were investigated as a function of annealing temperature. Since the ceramic films deposited with aerosol deposition method have not a perfect crystal structure due to non-uniform internal stress occurred by mechanical collision during their deposition, the post annealing could be a key process to release its internal stress and to improve its micro structure for optimizing the magnetic and magneto-optic properties of films. The crystallinity of Bi: YIG film was improved with increase of annealing temperature, and the saturation magnetization increased up to 87 emu/cc at $800^{\circ}C$. The Faraday rotation increased up to $1.4deg/{\mu}m$ by annealing at $700^{\circ}C$ around the wavelength of $0.5{\mu}m$. The optical transmittance of the Bi:YIG film was also improved in visible region.

• 한국입자에어로졸학회지
• /
• 제9권2호
• /
• pp.51-57
• /
• 2013

A graphene(GR)-$TiO_2$ composite was synthesized from colloidal mixture of graphene oxide(GO) nanosheets and $TiO_2$ nanoparticles by an aerosol assisted self-assembly. The morphology, specific surface area and pore size of asprepared GR-$TiO_2$ composite were characterized by FE-SEM, BET, and BJH respectively. The shape of GR-$TiO_2$ composite was spherical. The average particle size was 0.5-1 ${\mu}m$ in diameter and the pore diameter ranged 20-50 nm. Photovoltaic characteristics of a mixture of the GR-$TiO_2$ and $TiO_2$ nanoparticles were measured by a solar simulator under simulated solar light. The highest photoelectric conversion efficiency of the mixture photoanode was 5.1%, which was higher than that of $TiO_2$ photoanode.

• 대한원격탐사학회지
• /
• 제32권6호
• /
• pp.681-691
• /
• 2016

자외선, 가시광, 적외선 파장대역의 채널을 갖는 위성 관측에 기반한 다양한 에어로졸 정보산출 알고리즘에 대해 많은 연구가 이루어져 왔다. 본 연구에서는 최근 발사된 일본 기상위성 히마와리 8의 가시광-적외선 채널정보를 이용하여, 어두운 지표 위에서 에어로졸 광학정보를 산출하였다. 가시영역을 이용한 에어로졸 광학정보 산출은 지표신호의 정확한 제거가 매우 중요한데, 이는 최소반사도법을 사용하여 산출하였다. 본 알고리즘은 어두운 지표에서 에어로졸 광학정보를 산출을 하기에 구름, 사막 등과 같은 밝은 지표 위에서는 산출하지 않는다. AHI는 가시광채널 외에도, 다양한 적외 채널을 갖고 있어 공간 비균질성, 밝기온도차이(Brightness Temperature Difference, BTD) 등을 이용하여 구름제거가 가능하다. 밝기온도(Brightness Temperature, BT)를 이용해 하층운, 상층운 제거에 유리한 채널을 사용하여 구름을 제거하게 된다. Aerosol Optical Depth (AOD) 산출 결과로는 상관계수가 0.7, 기대오차(Expected Error, EE) 안에 있는 비율이 49%를 나타내고 있으며, 낮은 AOD에서도 정확한 산출이 이뤄지고 있음을 보이고 있다. 다만 베이징 허베이 지역에서는 에어로졸 광학두께를 과소모의하는 경향이 있는데, 이는 최소반사도법을 이용한 지표정보 산출이 실제 지표반사도보다 높게 지표면 정보를 추정하게 되기 때문으로 추정된다.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.375-382
• /
• 2010

A layered perovskite photocatalysts, $SrBi_2Nb_2O_9$ (SBN), was synthesized by the conventional solid-state reaction method and characterized by X-ray diffraction (XRD) and UV-visble spectrophotometry. The results showed that the structure of $SrBi_2Nb_2O_9$ is orthorhombic. Diffuse reflectance spectra for calcined and attrition-milled SBN showed the main absorption edges were less 400 nm, that is ultraviolet region. SBN under micron-sized powder was deposited on the $Al_2O_3$ by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $SrBi_2Nb_2O_9$ photocatalytic thick film was fabricated. AD-deposited SBN thick films were characterized by XRD, scanning electron microscopy (SEM) and UV-visable spectrophotometry, Moreover, it was found that several nano-sized SBN film by AD process can improve the photocatalytic activity under visable reflectance.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.208-213
• /
• 2020

Four types of BaTiO₃ powders are prepared and successfully deposited on glass and Pt/Si substrates using the aerosol deposition process. Particles with sizes of 0.45 ㎛ and 0.3 ㎛ are selected as the starting powder, while those powders are treated using a different milling method. The jet-milled and ball-milled powders not only showed a smaller particle-size distribution, but compared with the non-milled powder, it also had a higher deposition rate using the uniformly generated aerosol. Although the films deposited using particles with size 0.45 ㎛ exhibited some craters on the surface, significantly flat film surfaces were obtained. However, particles with size 0.3 ㎛ create a slightly rough film surface, but the dielectric constant was greater than in the case involving particles with size 0.45 ㎛. Consequently, a suitably large particle size significantly influences the deposition rate and improvement in the surface roughness, and a uniform particle size distribution appears to contribute to an improved dielectric constant. Therefore, it is believed that the dielectric properties along with the growth characteristics can be enhanced by limiting particle size and shape.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.314-320
• /
• 2021

Controlling ambient humid condition through high performance humidity sensors has become important for various fields, including industrial process, food storage, and the preservation of historic remains. Although aerosol deposited humidity sensors using ceramic BaTiO₃ (BT) material have been widely studied because of their longtime stability, there remain critical disadvantages, such as low sensitivity, low linearity, and slow response/recovery time in case of the sensors fabricated at room temperature. To achieve superior humidity sensing properties even at room temperature condition, BT-Cu composite films utilizing aerosol deposition (AD) process have been proposed based on the percolation theory. The BT-Cu composite films showed gradually improved sensing properties until the Cu concentration reached 15 wt% in the composite film. However, the excessive Cu (above 30 wt%) containing BT-Cu composite films showed a rapid decrease of the sensing properties. The results of observed surface morphology of the AD fabricated composite films, to figure out the metal filler effect, showed correlation between surface topography as well as size and the amount of open pores according to the metal filler content. Overall, it is very important not only dielectric constant of the humidity sensing films but also microstructures, because they affect either the variation range of capacitance by ambient humidity or adsorption/desorption of ambient humidity onto/from the humidity sensing films.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.138-145
• /
• 2022

Today, graphene loaded textiles are being considered promising smart clothing due to their high conductivity. In this study, we reported reduced graphene oxide(r-GO) deposited pure cotton fabrics fabricated with a colloidal solution of graphene(GO), using a one-step aerosol spray pyrolysis(ASP) process and their potential application on smart textiles. The ASP process is advantageous in that it is easily implementable and can be applied for continuous processing. Moreover, this process has never been applied to deposit r-GO on pure cotton fabric. The field emission-scanning microscopy (FE-SEM) observation, Fourier transform-infrared(FT-IR) analysis, Raman spectroscopy, X-ray diffraction(XRD) analysis, and ultraviolet transmittance(UVT) were used to evaluate material properties of the r-GO colloids. The resistance was also measured to evaluate the electrical conductivity of the specimens. The results revealed that the r-GO was successfully deposed on specimens, and the specimen with the highest electrical conductivity demonstrated an electrical resistance value of 2.27 kΩ/sq. Taken together, the results revealed that the ASP method demonstrated a high potential for effective deposition of r-GO on cotton fabric specimens and is a prospect for the development of conductive cotton-based smart clothing. Therefore, this study is also meaningful in that the ASP process can be newly applied by depositing r-GO on the pure cotton fabric.

• KSBB Journal
• /
• 제29권6호
• /
• pp.405-413
• /
• 2014

In this study, gemcitabine (Gem)-Poly(L-lactic acid) (PLLA) conjugates were synthesized through an amide linkage reaction. Then, the microparticles of Gem-PLLA/PLLA blends containing gemcitabine were prepared using a supercritical fluid process, called aerosol solvent extraction system (ASES). Gemcitabine-loaded Gem-PLLA/PLLA microparticles obtained from the ASES process showed a spherical shape. The amount of gemcitabine released after 30 day incubation in a phosphate buffer solution of pH 7.4 was about 90% of the total amount of gemcitabine present in the product.