• 지식경영연구
• /
• 제21권2호
• /
• pp.59-75
• /
• 2020

In this paper, we investigate the influence of factors on the firm, industry, and country levels on the new product development performance (NPD) of manufacturing firms in advanced economies. The resource-based view, industrial organization theory and institutional theory have established that firm-, industry- and country-level factors are all relevant for the NPD of firms. However, little is known about the relative importance of factors at the three different levels across countries, as prior studies on firms' NPD have focused on specific countries and levels of analysis. Our analysis of survey data from 1,437 manufacturing firms in nine advanced OECD countries shows that while firm-level factors are generally better predictors of firms' innovativeness than either industry- or country-level factors, the results strongly differ across countries, indicating that the relative importance of antecedents of innovativeness is country-specific rather than universal.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.76-82
• /
• 2021

At present, with the development of precision instruments, high dimensional accuracy of workpieces must be ensured. In particular, for the aluminum alloys used in automobiles, the surface roughness of the workpiece is extremely important. The dimensional accuracy and surface roughness of the workpiece is considerably affected by the rotational accuracy of the rotor. Therefore, to enhance the rotational accuracy, various variables such as those related to the components such as bearings, motors, and end mills, rotational speeds, and vibrations must be considered. In this study, the difference in the quality of the workpieces was compared considering the weight imbalance and rotational speed as variables.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.204-214
• /
• 2010

A manufacturing/remanufacturing system is investigated with the consideration of required minimum quality of end-of-used products. A constant demand is satisfied by remanufacturing end-of-used products and manufacturing raw materials outsourced from outside. It is assumed in this system that the buyback price and remanufacturing cost are related to the different quality level of end-of-used products. For remanufacturing, only the used products that satisfy a required minimum quality level will be recycled. Thus, the returning rate is a function of the required minimum quality level. Functions of returning rate, buyback price and remanufacturing cost, which are closely connected to the quality level of end-of-used products, are investigated here. Treating the required minimum quality level of end-of-used products, the length of a cycle, the number of manufacturing lots and remanufacturing lots in a cycle as decision variables, the mathematical models with the objective of minimizing the average total cost are constructed. Through construction of a solution process based on Tabu Search algorithm and calculating examples, the validity of the models is illustrated.

• 분석과 대안
• /
• 제6권1호
• /
• pp.195-222
• /
• 2022

From the economic development perspective, economic growth should accompany structural improvement in order to meet complex demands from a society. In the context of development economics, economic growth is critically dependent on successful structural advancement. The issue of structural change is also important for advanced economies as the landscape of modern industry is changing fast. Many advanced countries of slow growth are experiencing dawdling changes in industry structure. However, there is no definitive answer to the question of whether there is a causal relationship between structural change and growth. This study empirically assesses the relationship between structural change or 'speed' thereof and economic growth in developed countries of OECD. Rather than looking into the causes of structural changes, this study simply measures structural changes in OECD economies and examines if structural change is really contributing to growth. The reason why this study focuses on advanced countries of OECD is rather obvious; technological innovation and emergence of new industries pressure these countries to restructure their economies to address these new challenges though they are at stages well beyond conventional industrialization. And structural rigidity can always limit growth even in advanced countries. The main results of this study can be summarized as a positive relationship between 'change and growth'. 'Change' in this study refers to changes in the industrial structure based on value-added and was analyzed to have a close positive relationship with economic growth. This result is consistent with arguments of early development economists emphasizing structural upgrade as an indispensable process for growth and development. The result of this study potentially confirms that the main argument of development economics is valid also for advanced economies. One of our results suggests that business/professional services and social services should be main targets for restructuring for advanced economies. The rational may be that rapid convergence of manufacturing and services is a key for structural advancement in the era of new technologies. Obviously, as manufacturing technology and production are standardized, it is difficult to secure international competitiveness through traditional manufacturing alone and the role of R&D, design, logistics, and marketing is becoming more important.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.316-320
• /
• 2019

The effect of boronizing on mechanical properties including wear behavior and hardness of Inconel 625 superalloy were investigated. The cross-section observation demonstrated that boronized samples were composed of multi-phase boride layer (Cr_xB_x, Ni₂B), diffusion layer, and substrate. The boride and diffusion layers were increased with increasing treatment temperature and holding time. However, Cr_xB_x layer was partially peeled off when it treated 1000℃. Subsequently, boride layer was completely separated from substrate with increasing temperature and time. A partial peeling of Cr_xB_x layer is not noticeably degraded mechanical properties. In particular, friction coefficient and wear resistance were enhanced in lack of Cr_xB_x phase. Therefore, these results suggest that a Ni₂B phase mainly contribute to wear behavior on boronized Inconel 625 superalloy.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.22-27
• /
• 2014

Nanosized zeolite was prepared in an autoclave at a hydrothermal temperature range of 100 to $170^{\circ}C$. In TEM and particle-size analyses, the size of the nanosized powders was found to be 10-300 nm, and its distribution is uniform and spherical, depending on the hydrothermal temperature. XRD confirms that the nanosized powder is MFI zeolite.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제32회 학술대회 초록집
• /
• pp.104-104
• /
• 2007

• 대한산업공학회지
• /
• 제23권3호
• /
• pp.581-595
• /
• 1997

The procedure of grouping the machines and parts to form cells is called manufacturing cell design. The manufacturing cell design is an important step in the development and implementation of advanced manufacturing systems. For the successful implementation of the manufacturing systems, identification of independent manufacturing cells, i.e., cells where parts are completely processed in the cell and no intercell movements, is necessary in the design phase. In this paper, we developed a mixed integer programming model and genetic algorithm based procedure to solve the independent manufacturing cells design problem considering the alternative process plans and machines duplication. Several manufacturing parameters such as, production volume, machine capacity, processing time, number of cells and cell size, are considered in the process. The model determines the process plan for parts, port families and machine cells simultaneously. The model has been verified with the numerical examples.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1328-1333
• /
• 2007

Unpredictable customer demands make manufacturers to make quality products with cheaper price and shorter delivery. To survive in the global market, the manufacturing industry needs to equip with advanced technologies including IT. Under this situation, "collaboration"is the best solution for manufacturers to survive and to grow their company instead of competition. With this strategy, we have conducted a project(e-Manufacturing). The companies participate to the project attained the amazing results by utilizing collaboration systems such as delivery shortened and increase in sale/profit. Since the strategy of the project is assessed to be very useful to increase competition power of manufacturers, the project will be enlarged to cover wider application domains with a new project name called "i-Manufacturing". In this paper, therefore, we introduce the specific output from the e-Manufacturing project and the specific strategies/plans of i-Manufacturing project.

• Journal of Korea Trade
• /
• 제25권2호
• /
• pp.75-94
• /
• 2021

Purpose - This article will take the Korean manufacturing industry as an example to estimate Korea's global value chain status from the perspective of overall and sub-industry, hoping to provide a theoretical reference for Korean manufacturing to climb the global value chain. Design/methodology - Based on the WIOD data. The data is calculated by using MATLAB (2014a) coding. The data for 6 sectors are classified according to the International Standard Industrial Classification revision 3 (ISIC Rev. 3), the WIOD data are used to calculate and compare the position, participation and dynamics of the Korea, China and USA' manufacturing industry in the 1995-2016. Findings - The empirical results supported conclusions of the theoretical model. In the Korean GVC of electrical and optical sector, while stronger forward linkages than backward linkages to GVC are advantageous for an average advanced country, the benefits of downstream tasks are pronounced for non-advanced countries. And proved the correlation for an index to capture a country's upstream position or downstream position, it makes sense to compare that Korea's exports of intermediates in the same sector that are used by China and USA. Originality/value - The first is to re-examine the characteristics of South Korea's participation in global value chains under a more systematic and accurate theoretical framework, which provides a new empirical reference for related research; the second is to content covers of the manufacturing 6 sectors, so as to more completely describe the characteristics of Korean manufacturing's participation in global value chains; The value of this paper is providing empirical evidence of the effect of Korea's the GVC of manufacturing sectors. In the GVC of 6 sectors, first three have a higher position in the value chain and are in the upper middle and upper reaches of the GVC. The latter two have a low GVC position index, which has become the main sector that pulls down the overall position of Korea's manufacturing industry.