• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1053-1065
• /
• 2019

Land use statistics calculation is very informative data as the activity data for calculating exact carbon absorption and emission in post-2020. To effective interpretation by land use category, This study classify automatically image interpretation by land use category applying forest aerial photography (FAP) to deep learning model and calculate national unit statistics. Dataset (DS) applied deep learning is divided into training dataset (training DS) and test dataset (test DS) by extracting image of FAP based national forest resource inventory permanent sample plot location. Training DS give label to image by definition of land use category and learn and verify deep learning model. When verified deep learning model, training accuracy of model is highest at epoch 1,500 with about 89%. As a result of applying the trained deep learning model to test DS, interpretation classification accuracy of image label was about 90%. When the estimating area of classification by category using sampling method and compare to national statistics, consistency also very high, so it judged that it is enough to be used for activity data of national GHG (Greenhouse Gas) inventory report of LULUCF sector in the future.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.43-49
• /
• 2008

Purpose: The current study was conducted to evaluate the compatibility of UV-A blocking contact lens on eye protection with regular contact lens. Methods: The protective activity of regular contact lens (UV-A blocking: 20%) and UV-A blocking contact lens (UV-A blocking: 85%) on the denaturation of RNase A, catalase, and superoxide dismutase (SOD) induced UV-A irradiation were compared by acrylamide gel electrophoresis. The enzyme solutions were irradiated with UV-A for 1, 3, 6, 24 and 96 hours at the wavelength of 365 nm. Covering area with contact lenses were varied as 50%, 70% and 100% according to the calculation of blocking areas of anterior eye that could be covered with RGP lens, soft contact lens, and eye glasses, respectively. Results: Denaturations of RNase, catalase and SOD were exaggerated when they were exposed to UV-A for a longer period. The denaturation was effectively prevented by UV-A blocking contact lens compared to regular contact lens. The capability of UV-A blocking contact lens was considerably reduced when the covering area with contact lens decreased and exposure time to UV-A extended. Conclusion: Therefore, it would be suggested that wearing contact lens for a long time under sunlight is carefully considered since the activity of UV-A blocking contact lens against UV-A irradiation may not be enough to protect enzymes presented in eyes when exposure time to UV-A increased.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.1
• /
• pp.1-11
• /
• 2021

Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.

• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.155-162
• /
• 1998

Ho-l66 was produced by neutron reaction in a reactor at the Korea Atomic Energy Institute (Taejon, Korea). Ho-l66 emits a high energy beta particles with a maximum energy of 1.85 MeV and small proportion of gamma rays (80 keV). Therefore, the radiation absorbed dose estimation could be based on the in-vivo quantification of the activity in tumors from the gamma camera images. Approximately 1 mCi of Ho-l66 in solution was mixed into the flood phantom and planar scintigraphic images were acquired with and without patient interposed between the phantom and scintillation camera. Transmission factor over an area of interest was calculated from the ratio of counts in selected regions of the two images described above. A dual-head gamma camera(Multispect2, Siemens, Hoffman Estates, IL, USA) equipped with medium energy collimators was utilized for imaging(80 keV${\pm}$10%). Fifty-nine year old female patient with hepatoma was enrolled into the therapeutic protocol after the informed consent obtained. Thirty millicuries(110MBq) of Ho-166-CHICO was injected into the right hepatic arterial branch supplying hepatoma. When the injection was completed, anterior and posterior scintigraphic views of the chest and pelvic regions were obtained for 3 successive days. Regions of interest (ROIs) were drawn over the organs in both the anterior and posterior views. The activity in those ROIs was estimated from geometric mean, calibration factor and transmission factors. Absorbed dose was calculated using the Marinelli formula and Medical Internal Radiation Dose (MIRD) schema. Tumor dose of the patient treated with 1110 MBq(30 mCi) Ho-l66 was calculated to be 179.7 Gy. Dose distribution to normal liver, spleen, lung and bone was 9.1, 10.3, 3.9, 5.0 % of the tumor dose respectively. In conclusion, tumor dose and absorbed dose to surrounding structures were calculated by daily external imaging after the Ho-l66 therapy for hepatoma. In order to limit the thresholding dose to each surrounding organ, absorbed dose calculation provides useful information.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.257-267
• /
• 2023

The grassland section of the greenhouse gas inventory has limitations due to a lack of review and verification of biomass compared to organic carbon in soil while grassland is considered one of the carbon storages in terrestrial ecosystems. Considering the situation at internal and external where the calculation of greenhouse gas inventory is being upgraded to a method with higher scientific accuracy, research on standards and methods for calculating carbon accumulation of grassland biomass is required. The purpose of this study was to identify international trends in the calculation method of the grassland biomass sector that meets the Tier 2 method and to conduct a review of variables applicable to the Republic of Korea. Identify the estimation methods and access levels for grassland biomass through the National Inventory Report in the United Nations Framework Convention on Climate Change and type the main implications derived from overseas cases. And, a field survey was conducted on 28 grasslands in the Republic of Korea to analyse the applicability of major issues. Four major international issues regarding grassland biomass were identified. 1) country-specific coefficients by land use; 2) calculations on woody plants; 3) loss and recovery due to wildfire; 4) amount of change by human activities. As a result of field surveys and analysis of activity data available domestically, it was found that there was a significant difference in the amount of carbon in biomass according to use type classification and climate zone-soil type classification. Therefore, in order to create an inventory of grassland biomass at the Tier 2 level, a policy and institutional system for making activity data should develop country-specific coefficients for climate zones and soil types.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• The Korean Journal of Pharmacology
• /
• v.26 no.2
• /
• pp.219-226
• /
• 1990

Enalapril maleate tablets of two different producers were tested for bioequivalence. Enalapril is rapidly metabolized to an active metabolite, enalaprilat which inhibits angiotensin-converting enzyme (ACE). The pharmacokinetics of enalapril maleate and the time course of inhibition of plasma ACE activity after administration of the drugs were studied. Two single doses of 10mg each of enalapril maleate were administered orally to twelve male volunteers in a balanced, randomized, two-way crossover investigation. Plasma enalaprilat concentrations were determined over a 23-hour after the dose by enzyme inhibition assay and enalapril by the same method following in vitro hydrolysis. Urinary recoveries of enalapril and enalaprilat were determined for the calculation of renal clearance. Plasma ACE activity was determined by an enzyme assay. Peak plasma levels of enalapril were observed about 1 hour after the doses, and practically all enalapril had disappeared from plasma within 6 hour. Peak enalapril concentrations of both formulations were almost identical ($Vasotec^{\circledR}$, 61.38 ng/ml; $Beartec^{\circledR}$, 64.27 ng/ml). The values of the pharmacokinetic parameters of enalaprilat computed for $Vasotec^{\circledR}$ and $Beartec^{\circledR}$ tablets are presented in that order; area under the curve=330.63:320.96 $ng{\cdot}hr/ml$; peak concentration=38.63:39.43 ng/ml; time to peak=3.83:4.08 hour; elimination half-life=3.95:3.92 hours. No statistically significant difference was detected when area under the curve and all other parameters were compared. Using criteria of 95% confidence interval for the comparison of these parameters, only the upper limits of area under the curve and time to peak of enalapril were over 120%. All the parameters of enalaprilat were acceptable. Percent inhibition of plasma ACE to plasma enalaprilat concentration showed the sigmoid concentration-inhibition relationship. Time courses of plasma ACE inhibition after the administration of both formulations were quite similar. The formulations were found to be equivalent when compared on the premise that no significant difference was detected when pharmacokientic parameters and inhibition of ACE activity were compared, based on the confidence limits analysis.

• Korea journal of population studies
• /
• v.13 no.2
• /
• pp.1-18
• /
• 1990

This is a study which attempt to analyze changing patierns of economic active popu-lation, t o estimato- future patterns, and exa- mine vartons problems arises by changing c ire u mst ances of t he labor force market in- clunging soici al, economic ic, heathl th and demoi-graph ic aspects. We have constructed series of wotking life table which are useful in syt uiolyioig the lirocess of growth and structural change of labor force. Work i ng life tables represent ihie life eyele of econrmic' activity in hi ypothetical cohorts, that is. gen-erat i on of men Sn bject at eat' b period ot f their lives th given ra to's o mor tali it y and of par-- tici pation in economic activities. The tabloes prot' ide measorues of the alvet'age he ng t able of economically aeti \- e life. and agespecific rates of en trannee' into and retirement from the hahn' force. In const routing working life tables, age-specific activity rates and life tabole popula- titoto which represents contemporary condi-tions of moortality in Korea au'e the basic' maltoerials. We have derived the age-specific rates foorm economically active population survey, whoich were conducted by the Bureau of Statistics, Economic Planning Borard of the Korean government. Working life tables are constructed for men wtable these materi- als in the year of 1970, 1980 and 1988 by a modified Wolfbein-Wool's method. Some of the findings may be summerized as follow : 1) A central part of constructing working life table is calculation of stationary' economic active population, which represents the number of men in the stationtary population extoected to be in the labor force at each age group in the life span. The stationary economic active population by age have generally a universal pattern, where they rise sharply in the early twenties, approach its' peak in the thirties decline thereafter. at first graolually and then more rapidly at an advanced age. Korean men show the same general pa ttern of age distribution of stationary eco-- nomic active population with sharp increase hegining from the age interval of 20 to 24, reaching to maximum level at older age. The population. however, presumably, increased substantially due to increaseing school atte endance rates. Another difference exiSts in the youngest age groups, that is the activity rate in the year of 1988 is lower than that of Japan. The table shows an analysis of changes in the age distrihution of labor force between 1970, 1980 and 1988. 2) It was shown an analysis of changes in the age distribution and cause of separation from labor force. The entrance rate to labor force has increased from 18~\5 persons to 299 persons per 1000 head of stationary population between that of 1980 than that of 1988 for Korean men in 20~24 age group. The entrace rate to labor force shows a rapid entrance appearance concentrated on the 15~24 age group. The separation rate from labor force by retirment in Korea in the year of 1988 shows a great difference of the about four times as much as that of Japan. 3) The functions of table illustrate the patterns of working life of males in Korea in 1970, 1980 and 1988. The average remaining number of economically active years, e at age 15 in 1988 is 46.39 which is 2.12 years of increase compared with that of at age 15 in 1970,1980 and 1988 are 43.90,44.27 and 46.39 respectively, showing steadily increase dur- ing the past double decade the increase in the length of economically active life various age may be considered to have come both from extention of general life expectancy and from increasing entrance rate to economic activity in high age that of working is far greater in 1988 than that of 1980. The gaps between expectation of life and average remaining years of economically active widened due to rapid improvement of mortality level in Ko- rea. This observation together with the population pressure by the appearance of a group of younger population implies that constant increase of economically inactive population among older age group.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.1
• /
• pp.77-85
• /
• 1996

Radioiodine($^{131}I$) has been used for the treatment of Graves' hyperthyroidism since the late 1940's and is now generally regarded as the treatment of choice for Graves' hyperthyroidism who does not remit following a course of antithyroid drugs. But for the dose given, several different protocols have been described by different centers, each attempting to reduce the incidence of long-term hypothyroidism while maintaining an acceptable rate control of Graves' hyperthyroidism. Our goals were to evaluate effective half-life and predict absorbed dose in Graves' hyperthyroidism patients, therefore, to calculate and readminister radioiodine activity needed to achieve aimed radiation dose. Our data showed that the mean effective $^{131}I$ half-life for Graves' disease is 5.3 days(S.D=0.88) and mean biologic half-life is 21 days, range 9.5-67.2 days. The mean admininistered activity and the mean values of absorbed doses were 532 MBq(S.D.=254), 112 Gy (S.D.=50.9), respectively. The mean activity needed to achieve aimed radiation dose were 51MBq and marked differences of $^{131}I$ thyroidal uptake between tracer and therapy ocurred in our study. We are sure that the dose calculation method that uses 5 days thyroidal $^{131}I$ uptake measurements after tracer and therapy dose, provides sufficient data about the effective half-life and absorbed dose of $^{131}I$ in the thyroid and predict the effectiveness of $^{131}I$ treatment in Graves' hyperthyroidism.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.141-150
• /
• 2012

This paper suggests a critical path search algorithm that can easily draw PERT/GANTT chart which manages and plans a project schedule. In order to evaluate a critical path that determines the project schedule, Critical Path Method (CPM) is generally utilized. However, CPM undergoes 5 stages to calculate the critical path for a network diagram that is previously designed according to correlative relationship and execution period of project execution activities. And it may not correctly evaluate $T_E$ (The Earliest Time), since it does not suggest the way how to determine the sequence of the nodes activities that calculate the $T_E$. Also, the sequence of the network diagram activities obtained from CPM cannot be visually represented, and hence Lucko suggested an algorithm which undergoes 9 stages. On the other hand, the suggested algorithm, first of all, decides the sequence in advance, by reallocating the nodes into levels after Breadth-First Search of the network diagram that is previously designed. Next, it randomly chooses nodes of each level and immediately determines the critical path only after calculation of $T_E$. Finally, it enables the representation of the execution sequence of the project activity to be seen precisely visual by means of a small movement of $T_E$ of the nodes that are not belonging to the critical path, on basis of the $T_E$ of the nodes which belong to the critical path. The suggested algorithm has been proved its applicability to 10 real project data. It is able to get the critical path from all the projects, and precisely and visually represented the execution sequence of the activities. Also, this has advantages of, firstly, reducing 5 stages of CPM into 1, simplifying Lucko's 9 stages into 2 stages that are used to clearly express the execution sequence of the activities, and directly converting the representation into PERT/GANTT chart.