• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1507-1512
• /
• 2018

The development of an organic-based aqueous redox flow battery (RFB) using quinone as an electroactive material has attracted great attention recently. This is because this battery is inexpensive, produces high energy density, and is environment friendly in stationary electrical energy storage applications. Herein, we investigate the redox potentials and solubilities of indole-5,6-quinone and indole-4,7-quinone derivatives in terms of the substituent effects of functional groups using theoretical calculations. Our results indicate that full-site substituted derivatives of indolequinone are more useful as active materials compared to single-site substituted derivatives. In particular, our calculations reveal that the substitution of $-PO_3H_2$ and $-SO_3H$ functional groups with multiple polar bonds is very effective in increasing the activity of the aqueous RFB. As a strategy to overcome the limitation that the aqueous solubility is intrinsically low because they are organic molecules, we suggest the substitution of functional groups with multiple polar bonds to the backbones of active organic materials. Among 180 indolequinone derivatives, 17 candidates that meet the redox potential standards ($${\leq_-}0.2V$$ or $${\geq_-}0.9V$$) and eight candidates with solubility exceeding 2 mol/L are identified. Three indolequinone derivatives that satisfy both conditions are finally presented as promising electroactive candidates for an aqueous RFB.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.295-304
• /
• 2021

Learning assistance system that continuously measures user's concentration will be helpful to grasp the concentration pattern and adjust the learning method accordingly to improve the learning efficiency. Although a lot of various learning aids have been proposed, there have been few studies on the concentration monitoring system in real time. Therefore, in this study, we developed an Android-based mobile application that can measure concentration during study by using functional near-infrared spectroscopy, which is used to measure brain activity. First, the task accuracy was predicted at a maximum level of 93.75% from the prefrontal oxygenation characteristics measured while performing the visual Q&A task on 11 college students, and a concentration calculation formula based on a linear regression model was derived. Then, a survey on the usability of the mobile application was conducted, overall high satisfaction and positive opinions were obtained. From these findings, this application can be used as a customized learning aid application for users, and further, it can help educators improve the quality of classes based on the level of concentration of learners.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.171-183
• /
• 2022

The parent and daughter nuclides in a radioactive decay chain arrive at secular equilibrium once they have a large half-life difference. The characteristics of this equilibrium state can be used to estimate the production time of nuclear materials. In this study, a mathematical model and algorithm that can be applied to radio-chronometry using the radioactive equilibrium relationship were investigated, reviewed, and implemented. A Bateman equation that can analyze the decay of radioactive materials over time was used for the mathematical model. To obtain a differential-based solution of the Bateman equation, an algebraic numerical solution approach and two different matrix exponential functions (Moral and Levy) were implemented. The obtained result was compared with those of commonly used algorithms, such as the Chebyshev rational approximation method and WISE Uranium. The experimental analysis confirmed the similarity of the results. However, the Moral method led to an increasing calculation uncertainty once there was a branching decay, so this aspect must be improved. The time period corresponding to the production of nuclear materials or nuclear activity can be estimated using the proposed algorithm when uranium or its daughter nuclides are included in the target materials for nuclear forensics.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.173-180
• /
• 2022

In the naked eye observation, the health of livestock can be controlled by the range of activity, temperature, pulse, cough, snot, eye excrement, ears and feces. In order to confirm the health of livestock, this paper uses calf face image data to classify the health status by image shape, color and texture. A series of images that have been processed in advance and can judge the health status of calves were used in the study, including 177 images of normal calves and 130 images of abnormal calves. We used GLCM calculation and Convolutional Neural Networks to extract 6 texture attributes of GLCM from the dataset containing the health status of calves by detecting the image of calves and learning the composite image of Convolutional Neural Networks. In the research, the classification ability of GLCM-CNN shows a classification rate of 91.3%, and the subsequent research will be further applied to the texture attributes of GLCM. It is hoped that this study can help us master the health status of livestock that cannot be observed by the naked eye.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.58-65
• /
• 2011

Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.

• Journal of Korean Public Health Nursing
• /
• v.3 no.2
• /
• pp.5-46
• /
• 1989

The current medical payment Insurance Rates in Korea stipulate charges for medical treatment by the doctor, pharmaceutist, medical technician and maternity nurse. But unfortunately didn't specify those charges for nursing done by the professional nurse. Only basic nursing fee is accounted insufficiently in current medical insurance fee schedule. therefore, Being face with covering entire people by medical insurance by 1991, It seems that the problems pertaining to operating the hospital and medical insurance system would be incessantly expanded in that no mention is made of medical charges rendered by major medical producer service in the current system, For that reason, this study made an attempt to clarify the importance the professional nursing puts of the current medical payment. The purpose of this study was to accounting nursing fee which diveded into the current medical fee schedule. (Method) 1. Data collection; Importance and difficulties in nursing activities was conducted in 'S' National University Hospital. Total nursing activities were selected 72 items which included direct care and indirect care. This study was conducted to evaluating the degree of importance and difficulties according to nursing activities through questionnaire to 204 RN. and so relative difficulties (acuity) were computered because the nursing cost level of each nursing service was differently established by the equivalent coefficient according to degree of relative difficulty and time required. 2. Calculation of cost according to nursing activities; After 47 nursing activities were selected in General surgery nursing units, calculation of nursing cost was as follows Cost of Nursing activity = (relative difficulty X Average hourly wage and benefits of nurse) + material cost of nursing -t- Average nursing administration cost So, Calculated cost by nursing activities was compared to current non-insured and insurance rate. 3. Calculation of nursing cost by K - DRG ; Total of 578 patients who were hospitalized in General Surgery units from January to March 1988 ware classified by K - DRG After estimation of total nursing cost based on the K-DRG, verified the appropriateness of basic nursing fee in medical insurance rate (Results) 1. Analysis of degree of importance and difficulties were 4.16 and 3.67 based on 5 point scale. This score were judged that it is worthy specifying the nursing fee 2. The nursing cost of 47 nursing service items in general surgery patients showed that the average cost of nursing activity was \1374.5 and The lowest cost was \217 of 'oral administration nursing' item, The highest cost was \11,025 of 'saline enematill clear' item 3. The result of comparison between the calculated cost by nursing activities against the current non-insured and insurance rate showed that 13 items(27.7%) involved to payment of insurance rate, 9 items(19.1%) involved to non-insured rate, remainder 25 items (53.2%) were not charged anywhere of total 47 nursing activities 4. When calculated cost by nursing activities was 100. current insurance rate was 62.3, non-insured rate was 176.6. Therefore this showed that most of non-insured rate were higher than calculated nursing cost. The insurance rate, however, were lower than it. Reim-bursement was imputed to non-insured patients. So the current rate system became estrainged from cost system. When Remainder 25 items of nursing activities compared' to \1390 of daily basic nursing fee per patient belonged to payment as a insurance fee schedule, basic nursing fee schedule was 1-2% of calculated cost of nursing activities. Therefore it showed that nursing fee was not counted adequately in it. 5. Nursing cost by K-DRG estimated in chart review based on counting number of nursing activities and length of stay The result showed that average amount of total nursing cost was \183828.1 Comparison of nursing cost calculated by K- DRG and basic nursing fee schedule showed that only 12.3% of nursing cost was charged (Conclusion) From the above research result, It is fact that nursing prime cost should be estimated more accurately and included adequately in current medical payment system. The payment system of nursing activities should be introduced not only nursing activities of drug administration and injection fee belonged to insurance fee schedule but also most nursing activities belonged not to mekical fee schedule. Even if introducing payment system of nursing activities, It should be estimated scientific method of Accounting nursing cost So nurses could offer nursing care of good quality, thereby they could make a great contribution not merely to the convalescence of the patient but to the promotion of the people's health.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.71-80
• /
• 2016

PERT(Project Evaluation and Review Technique) is typical method in order to probabilistically establish the schedule plan for large scale complex project or mega project. PERT technique is impossible to estimate relationship of each activity probabilistically when there are overlapping relationships because it is limited to Finish-to-Start(FS) relationship. In order to overcome this kind of limitation of PERT technique, PLET(Probabilistic Linkage Evaluation Technique) has been suggested to probabilistically estimate project duration for various overlapping relationships for each activity. However, estimating project duration by PLET technique only considers uncertainty of relationship between activities and not activity time, thus it is not the perfect duration estimating method. The main objective of this research is to propose the integration model of PERT and PLET and verify its probabilistic validity. By verifying application of time calculation method of integration model in practical case, this research will suggest probabilistic project duration estimating method in schedule plan of high-risk construction industry.

• Journal of Educational Research in Mathematics
• /
• v.22 no.4
• /
• pp.495-515
• /
• 2012

This study is to diversely analyze teachers' Pedagogical Content Knowledge (PCK) regarding to the area of plane figures and discuss the consideration for the materialization of the effective class in learning the area of plane figures by identifying the improvements based on problems indicated in PCK. The subjects of inquiry are what the problems with teachers' PCK regarding to the area of plane figures are and how they can be improved. In which is the first domain of PCK, teachers need to fully understand the concept of the area and the properties and classification of the area and length, recognized the sequence structure as a subject of guidance and improve the direction which naturally connects the flow of measurement by using random units in guidance of the area. In which is the second domain of PCK, teachers need to establish understanding of the concept for the area and understanding of a formula as a subject matter object and improve the activity, discovery and research oriented class for students as a guidance method by escaping from teacher oriented expository class and calculation oriented repetitive learning. They also need to avoid the biased evaluation of using a formula and evenly evaluate whether students understand the concept of the area as a performance evaluation method. In which is the third domain of PCK, teachers need to fully understand the concept of the area rather than explanation oriented correction and fundamentally teach students about errors by suggesting the activity to explore the properties of the area and length. They also need to plan a method to reflect student's affective aspects besides a compliment and encouragement and apply this method to the class. In which is the fourth domain of PCK, teachers need to increase the use of random units by having an independent consciousness about textbooks and supplementing the activity of textbooks and restructure textbooks by suggesting problematic situations in a real life and teaching the sequence structure. Also, class groups will need to be divided into an entire group, individual group, partner group and normal group.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.261-270
• /
• 2020

This study reviewed the quality addition rate, calculation, and application criteria needed to identify the possibility of additional medical technologists in the field for new certification and professional manpower to provide a superior laboratory. The six institutions that participated in the study were the size of large hospitals with more than 1,000 beds, with an average of five full-time laboratory physicians (also called clinical pathologists) and an average of 53 medical technologists, with 10.6 per laboratory physician. An analysis of the time required for each activity category of medical technologists revealed decreasing behavior during the analysis. In contrast, the ratio of the comprehensive pre-analysis activities was high due to the strengthening of laboratory operations and quality control. During the analysis, the proportion of biochemistry tests was high, and post-analysis of most of the results was performed. Hence, improving the quality of sample testing requires significant time, and appropriate personnel are required. In conclusion, the recruitment of medical technologists is also a key component to improving the sample quality, and corresponding personnel regulations are necessary.

• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.108-122
• /
• 1986

Changing concepts of health care, are stimulating the demand for health care, thereby orienting society to health care rights to such an extent that they are deemed as fundamental ones inalienable to man. Concomitantly, qualitative as well as quantative improvement is being sought in the nursing service field. Today, efforts are being made in various areas, especially to qualitatively improve nursing services. A second issue concerns proper staffing. It is important to study staffing, in as much as it continues to be the most persistent and critical problem facing hospital nursing administrators today. It involves quantity, quality, and utilization of nursing personnel. A great deal of attention has been focused on this problem since mid 1930's when nursing services began to be felt as an important segment of hospital operation representing the largest single item of hospital budgets. Traditionally, the determination and allocation of nursing personnel resources has relied heavily on gloval approaches which make use of fixed staff-to-patient ratios. It has long been recognized that these ratios are insensitive to variations between institutions and among individual patients. Therefore, the aim of this thesis is to point to the urgent need for the development of methodology and criteria suited to the reality of Korea. The present research selected one place, the W Christian Hospital, and was conducted over a period 10 days from January, and nurses who were them on duty in their unit. The total num-her of patients surveyed was 1,426 and that of 354. The research represents many variables affecting the direct patient care time using the result from the direct observation method, then using a calculation method to estimate the relationship between the patients care time and selected variables in the hospital setting. The amount of direct patient care time varies with many factors, such 89 the patients age. diagnosis and time in hospital. Differences are also found from hospital, clinic to clinic, ward to ward, and even shift to shift. In this research, the calculation method of estimating the required member of nursing staff is obtained by dividing the time of productive patient care activity(with the time of patient care observed), by the sum of the productive time that each the staff can supply, i.e., 360 minutes, which is obtained by deducting the time for personal activities. The results indicate a substantial difference between the time of productive patient care observed directing and the time of the productive patient care estimated using calculating method. If we know accurately the time of the direct patient care on a shift, there required number of staff members calculated if the proper method can be determinded should be able the time of the direct patient care be estimated by the patient classification system, but this research has shown this system to be in accurate in Korea. There are differences in the recommended time of productive patient care and the required number of nursing staff depending upon which method is used. The calculated result is not very accurate, so more research is needed on the patient classification system.