• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.296-301
• /
• 2005

As a new control strategy, the Nonlinear PID (NLPID) controller has been introduced successfully in power systems. The controller is free of planting model groundwork during the design procedure and is therefore able to be achieved quite simply. In this paper, a nonlinear PID controller used for a superconducting magnetic energy storage (SMES) unit connected to a power system is proposed. The purpose of designing such a controller is to improve the stability of the power system in a relatively wide operation range. The design procedure takes into account the active and reactive power cooperative control scheme as well as the simple structure so as to be more apt to practical utilization. Simulation is carried out to investigate the performance of the proposed controller in a high order nonlinear power system model under the. MATLAB environment. The results show satisfactory performance and good robustness of the controller. The feasibility of the controller is testified as well.

• Advances in Traditional Medicine
• /
• v.7 no.2
• /
• pp.205-210
• /
• 2007

The objectives of the study were (1) To evaluate the safety and tolerability of Damtab. (2) To characterize hypoglycemic effect of Damtab, if any. (3) To evaluate insulin sensitivity effect of Damtab, if any. Hypoglycemic effect of Damtab (700 mg and 1,400 mg) were examined. Gliclazide (80 mg) was used as an active control. Placebo was used as control. Breakfast was given, half an hour before dosing whereas lunch, snacks and dinner were given at 6, 10 and 14 h post dose. An oral glucose tolerance test was conducted to calculate the insulin sensitivity index from the values of glucose and insulin during oral glucose tolerance test. Both giclazide 80 mg and Damtab 1,400 mg significantly lowered plasma glucose level up to 6 h. Insulin sensitivity index of Damtab (1,400 mg) was found to be similar to that of placebo. A significant increase in insulin level at 1 h post dose of Damtab (1,400 mg) was observed. Damtab 700 mg shows placebo like effect whereas Damtab 1,400 mg possesses hypoglycemic effect.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1240-1243
• /
• 2008

The 6- inch electrowetting display (EWD) can be successfully developed by ink jet printing (IJP) technique. Due to the drop-on-demand characteristic of IJP technology, colored oil can be precisely dosed into the unit pixel. Here, we present the active matrix EWD in this article. By adopting this technique to dose different colored oils, single layer Multi-color EWD without adopting color filter can be achieved in the future.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.181-185
• /
• 2006

The flexible 2-inch AMOLED with $176{\times}144$ pixels has been demonstrated using top emission OLED driven by organic thin film transistors (OTFTs). For the development of AMOLED display on plastic substrate, we have developed several integration and unit process technologies. Through the optimization of the process based on plastic substrate, OTFT backplane with 2 transistors and 1 capacitor in a pixel has been fabricated and integrated with top emission OLED. The active addressing by OTFT driving circuit has been achieved and green light with 15 $cd/m^2$ at 15V has been observed.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.57-62
• /
• 2016

Purpose: A lot of active researches have addressed the impact of a building on global environment, but most of the researches focus on a residential building and a large office building. Hereupon, this study assessed the impact on environment quantitatively through the analysis of input materials targeting a school building. Method:This study calculated embodied energy of input materials suggested in a construction statement on a school building using the input-output analysis. This study finally carried out environmental impact assessment by applying LCIA DB shown in the preceding researches to the calculated embodied energy. Result: The analysis result revealed that the environmental impact per unit area(/$m^2$) at a school building was $4.11E-02PE{\cdot}yr$, among which Construction was found to be $3.59E-02PE{\cdot}yr$, being analyzed to account for about 87% of the total environmental impact. Also, as a result of detailed environmental impact, the impact on global warming among the total environmental impact was analyzed to be high, accounting for about 76%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.1-8
• /
• 2004

Viterbi decoders are widely used for communication and high-density storage devices. An add-compare-select(ACS) unit has been an active research area for a long time because it is the most critical component in determining the operation speed and power-consumption of the Viterbi decoder. We propose a new comparator which is faster and consumes less power than existing ones. We also used the new comparator for a Viterbi decoder and our simulations results show the Viterbi decoder outperforms existing ones at least $20\%$ in its operating speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1401-1407
• /
• 2002

This paper represents an investigation of the vehicle-to-vehicle distance control system using Hardware-in-the-Loop Simulation(HiLS). Control logic is primarily developed and tested with a specially equipped test vehicle. Establishment of an efficient and low cost development tool is a very important issue, and test vehicle approach is costly and time consuming. HiLS method is useful in the investigation of driver assistance and active safety systems. The HiLS system consists of a stepper motor for throttle control, a hydraulic brake system with an electronic vacuum booster, an electronic controller unit, a data logging computer which are used to save vehicle states and signals of actuator through a CAN and a simulation computer using mathematical vehicle model. Adaptation of a CAN instead of RS-232 Serial Interface for communication is a trend in the automotive industry. Since this environment is the same as a test vehicle, a control logic verified in laboratory can be easily transferred to a test vehicle.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.694-697
• /
• 1993

Soymilk was cultured by various human large intestinal bacteria and lactic acid bacteria; Bifidobacterium longum, Lactobacillus acidophilus, Baeteroides fragilis, Eubacterium limosum, Clostridium perfringens and Escherichia coli. Among them, only B. longum utilized raffinose and stachyose actively which are major oligosaccharides present in soymilk by producing active ${\alpha}-galactosidase$ and produced greatest acid. Number of colony forming unit of B. longum reached $1.5{\times}10^{8}$ after 16 hr culture in soymilk. Also Bifidobacterium longum produced the highest level of ${\alpha}-galactosidase,\;{\beta}-galactosidase\;and\;{\alpha}-galactosidase$, in soymilk during culture.

• Ocean Systems Engineering
• /
• v.8 no.2
• /
• pp.101-118
• /
• 2018

In case of conventional shallow-draft semisubmersibles, unacceptably large riser stroke was the restricting factor for dry-tree-riser-semisubmersible development. Many attempts to address this issue have focused on using larger draft and size with extra heave-damping plates, which results in a huge cost increase. The objective of this paper is to investigate an alternative solution by improving riser systems through the implementation of a magneto-rheological damper (MR Damper) so that it can be used with moderate-size/draft semisubmersibles. In this regard, MR-damper riser systems and connections are numerically modeled so that they can couple with hull-mooring time-domain simulations. The simulation results show that the moderate-size semisubmersible with MR damper system can be used with conventional dry-tree pneumatic tensioners by effectively reducing stroke-distance even in the most severe (1000-yr) storm environments. Furthermore, the damping level of the MR damper can be controlled to best fit target cases by changing input electric currents. The reduction in stroke allows smaller topside deck spacing, which in turn leads to smaller deck and hull. As the penalty of reducing riser stroke by MR damper, the force on the MR-damper can significantly be increased, which requires applying optimal electric currents.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.211-216
• /
• 2003

This work describes a 3 V 12b 100 MS/s CMOS digital-to-analog converter (DAC) for high-speed communication system applications. The proposed DAC is composed of a unit current-cell matrix for 8 MSBs and a binary-weighted array for 4 LSBs, trading-off linearity, power consumption, chip area, and glitch energy with this process. The low-glitch switch driving circuits are employed to improve linearity and dynamic performance. Current sources of the DAC are laid out separately from the current-cell switch matrix core block to reduce transient noise coupling. The prototype DAC is implemented in a 0.35 um n-well single-poly quad-metal CMOS technology and the measured DNL and INL are within ${\pm}0.75$ LSB and ${\pm}1.73$ LSB at 12b, respectively. The spurious-free dynamic range (SFDR) is 64 dB at 100 MS/s with a 10 MHz input sinewave. The DAC dissipates 91 mW at 3 V and occupies the active die area of $2.2{\;}mm{\;}{\times}{\;}2.0{\;}mm$