• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.18-26
• /
• 2011

Debates concerning the competitive edge of leading 3DTV technology of the shutter glasses (SG) 3D and the film-type patterned retarder (FPR) are flaring up. Although SG technology enables Full-HD 3D vision, it requires complex systems including the sync transmitter (emitter), the sync processor chip, and the LCD lens in the active shutter glasses. In addition, the transferred sync-signal is easily affected by the external noise and a 3DTV viewer may feel flicker-effect caused by cross-talk of the left and right image. The operating current of the sync processor in the 3DTV active shutter glasses is gradually increasing to compensate the sync reconstruction error. The proposed chip is a low-power hardware sync processor based discrete-event SoC(system on a chip) designed specifically for the 3DTV active shutter glasses. This processor implements the newly designed power-saving techniques targeted for low-power operation in a noisy environment between 3DTV and the active shutter glasses. This design includes a hardware pre-processor based on a universal edge tracer and provides a perfect sync reconstruction based on a floating-point timer to advance the prior commercial 3DTV shutter glasses in terms of their power consumption. These two techniques enable an accurate sync reconstruction in the slow clock frequency of the synchronization timer and reduce the power consumption to less than about a maximum of 20% compared with other major commercial processors. This article describes the system's architecture and the details of the proposed techniques, also identifying the key concepts and functions.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.1-10
• /
• 2013

RFID(Radio Frequency Identification) system is non-contact identification technology. A basic RFID system consists of a reader, and a set of tags. RFID tags can be divided into active and passive tags. Active tags with power source allows their own operation execution and passive tags are small and low-cost. So passive tags are more suitable for distribution industry than active tags. A reader processes the information receiving from tags. RFID system achieves a fast identification of multiple tags using radio frequency. RFID systems has been applied into a variety of fields such as distribution, logistics, transportation, inventory management, access control, finance and etc. To encourage the introduction of RFID systems, several problems (price, size, power consumption, security) should be resolved. In this paper, we proposed an algorithm to significantly alleviate the collision problem caused by simultaneous responses of multiple tags. In the RFID systems, in anti-collision schemes, there are three methods: probabilistic, deterministic, and hybrid. In this paper, we introduce ALOHA-based protocol as a probabilistic method, and Tree-based protocol as a deterministic one. In Aloha-based protocols, time is divided into multiple slots. Tags randomly select their own IDs and transmit it. But Aloha-based protocol cannot guarantee that all tags are identified because they are probabilistic methods. In contrast, Tree-based protocols guarantee that a reader identifies all tags within the transmission range of the reader. In Tree-based protocols, a reader sends a query, and tags respond it with their own IDs. When a reader sends a query and two or more tags respond, a collision occurs. Then the reader makes and sends a new query. Frequent collisions make the identification performance degrade. Therefore, to identify tags quickly, it is necessary to reduce collisions efficiently. Each RFID tag has an ID of 96bit EPC(Electronic Product Code). The tags in a company or manufacturer have similar tag IDs with the same prefix. Unnecessary collisions occur while identifying multiple tags using Query Tree protocol. It results in growth of query-responses and idle time, which the identification time significantly increases. To solve this problem, Collision Tree protocol and M-ary Query Tree protocol have been proposed. However, in Collision Tree protocol and Query Tree protocol, only one bit is identified during one query-response. And, when similar tag IDs exist, M-ary Query Tree Protocol generates unnecessary query-responses. In this paper, we propose Adaptive M-ary Query Tree protocol that improves the identification performance using m-bit recognition, collision information of tag IDs, and prediction technique. We compare our proposed scheme with other Tree-based protocols under the same conditions. We show that our proposed scheme outperforms others in terms of identification time and identification efficiency.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.717-721
• /
• 2012

Manganese dioxide ($MnO_2$) is one of the most important cathode materials used in both aqueous and non-aqueous batteries. The $MnO_2$ polymorph that is used for lithium primary batteries is synthesized either by electrolytic (EMD-$MnO_2$) or chemical methods (CMD-$MnO_2$). Commonly, electrolytic manganese dioxide (EMD) is used as a cathode mixture material for dry-cell batteries, such as a alkaline batteries, zinc-carbon batteries, rechargeable alkaline batteries, etc. The characteristics of lithium/manganese-dioxide primary cells fabricated with EMD-$MnO_2$ powders as cathode were compared as a function of the parameters of a manufacturing process. The flexible primary cells were prepared with EMD-$MnO_2$, active carbon, and poly vinylidene fluoride (PVDF) binder (10 wt.%) coated on an Al foil substrate. A cathode sheet with micro-porous showed a higher discharge capacity than a cathode sheet compacted by a press process. As the amount of EMD-$MnO_2$ increased, the electrical conductivity decreased and the electrical capacity increased. The cell subjected to heat-treatment at $200^{\circ}C$ for 1 hr showed a high discharge capacity. The flexible primary cell made using the optimum conditions showed a capacity and an average voltage of 220 mAh/g and 2.8 V, respectively, at $437.5{\mu}A$.

• Journal of Applied Biological Chemistry
• /
• v.53 no.3
• /
• pp.132-138
• /
• 2010

A gene encoding a putative alanine racemase in B. pseudomycoides was cloned and expressed in Escherichia coli BL21(DE3) using a pET-21 vector harbouring 6xHistidine tag. Affinity purification of the recombinant alanine racemase with a nickel resin resulted in one band by SDS-PAGE analysis. The purified enzyme showed a molecular weight of 46 kDa. The enzyme was the most active toward L-alanine and secondly D-alanine, implying that the enzyme is an alanine racemase. D-cysteine significantly inhibited the enzyme activity and also L-cysteine to a lesser extent. The enzyme was considerably activated by addition of pyridoxal-5'-phosphate (PLP), showing that 73% increase in activity was observed at 0.3 mM, compared to control. The enzyme was the most active at pH 9.0 and more stable at alkaline pHs than acidic pHs.

• Journal of Applied Biological Chemistry
• /
• v.54 no.4
• /
• pp.231-237
• /
• 2011

A gene encoding a putative alanine racemase in Xanthomonas. oryzae pv. oryzae was cloned, expressed and characterized. Expression of the cloned gene was performed in Escherichia coli BL21(DE3)pLys using a pET-21(a) vector harbouring $6{\times}histidine$ tag. Purification of the recombinant alanine racemase by affinity chromatography resulted in major one band by sodium dodecyl sulfate polyacryl amide gel electrophoresis analysis, showing about 45 kDa of molecular weight. The alanine racemase gene, cloned in this experiment, appears to be constitutively expressed in X. oryzae, as analyzed by reverse transcriptase polymerase chain reaction. The enzyme was the most active toward L-alanine and secondly D-alanine, showing a racemic reaction, thus the enzyme is considered as an alanine racemase. The enzyme was considerably activated by addition of pyridoxal-5-phosphate (PLP), showing that 75% increase in activity was observed at 0.3 mM, compared with control. D-Cysteine as well as L-cysteine significantly inhibited the enzyme activity. The inhibitions by cysteines were more prominent in the absence of PLP, showing 9 and 5% of control activity at 2 mM of addition, respectively. The enzyme was the most active at pH 8.0 and more stable at alkaline pHs than acidic pH condition.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.17-22
• /
• 2009

Two different organic-inorganic hybrid thin film transistors (OITFTs) with the structures of glass/ITO/ZnO/PMMA/Al (staggered structure) and glass/ITO/PMMA/ZnO/Al (inverted staggered structure), were fabricated and their electrical and structural properties were compared. The ZnO thin films used as active channel layers were deposited by the atomic layer deposition (ALD) method at a temperature of $100^{\circ}C$. To investigate the effect of the substrates on their properties, the ZnO films were deposited on bare glass, PMMA/glass and ITO/glass substrates and their crystal properties and surface morphologies were analyzed. The structural properties of the ZnO films varied with the substrate conditions. The ZnO film deposited on the ITO/glass substrate showed better crystallinity and morphologies, such as a higher preferred c-axis orientation, lower FWHM value and larger particle size compared with the one deposited on the PMMA/glass substrate. The field effect mobility ($\mu$), threshold voltage ($V_T$) and $I_{on/off}$ switching ratio for the OITFT with the staggered structure were about $0.61\;cm^2/V{\cdot}s$, 5.5 V and $10^2$, whereas those of the OITFT with the inverted staggered structure were found to be $0.31\;cm^2/V{\cdot}s$, 6.8 V and 10, respectively. The improved electrical properties for the staggered OITFTs may originate from the improved crystal properties and larger particle size of the ZnO active layer.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.63-75
• /
• 2011

A number of process algebras have been proposed to develop distributed mobile real-time systems: pi-Calculus, Mobile Ambients Calculus, Bigraph, etc. However, as the systems get large and complex, the algebras become less suitable for understanding the interactions and mobility of the processes of the systems due to the size and complexity. Therefore it is necessary to handle the size and complexity for systematic understanding of the systems. This paper handles the size and complexity with a method of abstraction on sequences of interactions and movements of processes in the systems, which can be further organized in the form of hierarchically structured lattices, namely, Prism. The theoretical principle of the abstraction is based on a new concept of Behavior Ontology, which is extended from Active ontology. Prism allows the systems to be analyzed in the perspective of the lattices in Prism, which are characterized by the hierarchically organized behavioral properties of the developing systems, for systematic understanding the systems. In this way, the complexity of the interactions and the movements can be handled systematically in the semantically and hierarchically organized structure of the behavior.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.138-143
• /
• 2008

RFID 기술은 기존의 바코드 기술보다 발전된 무선의 비접촉 인식 기술로서, 유비쿼터스 컴퓨팅의 핵심기술로 간주되고 있다. RFID 태그는 기존의 단순한 사물의 인식 기능 중심에서 사물의 상태 및 환경 정보를 감지할 수 있는 센서 태그로의 발전으로 물류 프로세스의 양적, 질적 향상을 도모할 수 있게 되었다. 센서 태그는 환경 정보를 센싱하기 위하여 배터리를 내장하고 있으며, RF Transceiver의 내장 유무에 따라 자체적으로 신호를 보낼 수 있는 active 센서 태그와 리더로부터의 신호를 사용하는 semi-passive 센서 태그로 구분된다. Semi-passive 센서 태그는 배터리를 부착함으로써 passive 태그에 비해 인식률과 인식거리가 향상되었고 active 태그에 비해 단가가 매우 저렴하여 센서 태그가 부착된 물품의 상태를 모니터링하고 환경을 감시하는 다양한 응용에 사용될 수 있다. 이러한 응용의 요구에 따라 Edge Manager는 기존의 passive 태그는 물론 센서 태그를 지원함으로써 상위 응용에게 정제된 결과를 전달할 필요성이 있다. 본 논문에서는 특히 semi-passive 센서 태그를 지원하는 Edge Manager의 설계를 위하여, 센서를 사용한 또 다른 활용 분야인 센서 네트워크에서의 질의 유형을 분석하고, semi-passive 센서 태그의 특징을 고려한 요구사항을 분석한다. Semi-passive 센서 태그는 센서 네트워크의 센서 노드와는 달리 태그 레벨에서 필터링과 병합을 수행할 수 없으므로 Edge Manager에서 이러한 기능이 제공되어야 한다. 본 논문에서는 Edge Manager에서의 센서 태그 데이터에 대한 질의를 위한 방법으로 EPCglobal ALE 표준명세의 ECSpec을 확장하는 방법을 제안하고, 센서 태그 데이터의 특성을 고려한 필터링 기법과 병합(aggregation) 기법을 적용한 질의 처리가 가능한 Edge Manager의 구조를 제시한다.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.12
• /
• pp.1653-1663
• /
• 2010

The first gene (${\alpha}$-gal1) encoding an extracellular ${\alpha}$-Dgalactosidase from the thermophilic fungus Talaromyces emersonii was cloned and characterized. The ${\alpha}$-gal1 gene consisted of an open reading frame of 1,792 base pairs interrupted by six introns that encoded a mature protein of 452 amino acids, including a 24 amino acid secretory signal sequence. The translated protein had highest identity with other fungal ${\alpha}$-galactosidases belonging to glycosyl hydrolase family 27. The ${\alpha}$-gal1 gene was overexpressed as a secretory protein with an N-terminal histidine tag in the methylotrophic yeast Pichia pastoris. Recombinant ${\alpha}$-Gal1 was secreted into the culture medium as a monomeric glycoprotein with a maximal yield of 10.75 mg/l and purified to homogeneity using Hisbinding nickel-agarose affinity chromatography. The purified enzyme was maximally active at $70^{\circ}C$, pH 4.5, and lost no activity over 10 days at $50^{\circ}C$. ${\alpha}$-Gal1 followed Michaelis-Menten kinetics ($V_{max}\;of\;240.3{\mu}M/min/mg,\;K_m\;of\;0.294 mM$) and was inhibited competitively by galactose ($K_m{^{obs}}$ of 0.57 mM, $K_i$ of 2.77 mM). The recombinant T. emersonii ${\alpha}$-galactosidase displayed broad substrate preference, being active on both oligo- and polymeric substrates, yet had strict specificity for the ${\alpha}$-galactosidic linkage. Owing to its substrate preference and noteworthy stability, ${\alpha}$-Gal1 is of particular interest for possible biotechnological applications involving the processing of plant materials.

• Archives of Pharmacal Research
• /
• v.27 no.4
• /
• pp.422-428
• /
• 2004

Expressed sequence tags (ESTs) were generated from two 3'-directed CDNA libraries constructed from quiescent and activated rat hepatic stellate cell (HSC) to analyze the expression profiles of active genes in both cells. From quiescent and activated HSC, 694 ESTs and 779 ESTs, respectively, were obtained after excluding those having shorter than 30 bp. Amonq ESTs obtained from quiescent and activated HSC, 68 and 73 kinds of ESTs (186 clones and 236 clones), respectively, appeared more than once, implying that their genes are expressed highly in each cell type. 52 among 73 ESTs appeared only in the activated HSC 47 amonq 68 ESTs only in the normal HSC, and 21 in both cells. The genes of these 52 ESTs were assumed to be expressed more highly in the activated HSC. To confirm the high expression of genes of which the ESTs appeared more than twice in the activated HSC, northern hybridization was carried out with RNAs derived from rat normal and fibrotic liver using each of 18 EST DNAs as probe. 13 ESTs showed more intense bands with RNA isolated from the fibrotic liver than normal liver. From these results, we confirm the positive correlation between abundance of transcript in activated HSCs and the expression level in fibrotic liver, The expression profile of the transcripts serves as an important tool in understanding the biological properties of HSC.