• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.84-87
• /
• 2001

A demand for the aggregates is increasing in the field of civil and architectural industry and so on. In these industries, the particle size and shape of aggregates are important factors and especially spherical or rounded particles are desired. In Japan, waste glass is used as one of the aggregate materials for the pavement or the construction. In this study based on the frictional action of material on each other, an autogenous grinding of silica glass with a stirred mill were carried out in order to eliminate flakelike or squarish particles and get spherical or rounded ones for aggregate materials. The autogenous grinding experiments were conducted by applying loads to the particle layer of silica glass. The particle shape was evaluated by the shape index, N/T and the degree of circularity, Ψ$_{ci}$ . The unfractured particles (20~13mm) were evaluated by N/T and Ψ$_{ci}$ , and the products (finer than 10${\mu}{\textrm}{m}$) by Ψ$_{ci}$ . As a result, N/T of the unfractured particles decreased with an increase of grinding time. Ψ$_{ci}$ of the unfractured particles and the products increased with an increase of grinding time (; progress of grinding), and became almost constant in the long time grinding. These tendencies were not changed by the applied load on the particle layer, but the limit value of Ψ$_{ci}$ at the products were varied with the applied load.plied load.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.462-468
• /
• 2006

Antibiotics are manufactured and used for specific physiological functions, hence they may exert adverse ecological consequences when they are in contact with nontarget organisms. In the last decade, many reports have been made on the occurrences of various antibiotic compounds in surface water, and their potential impact to the environment has become an increasing concern. This study was conducted to prioritize antibiotic substances with potential environment risk in Korea. Human use antibiotics with an EIC (Expected Introduction Concentration) value greater than $1{\mu}g/l$, US FDA's action limit criteria, were selected. In order to calculate a worst-case EIC for each substance, annual production volume (in kg) of each antibiotic substance was derived using the Korea Pharmaceutical Manufacturers Association (KPMA)'s monetary database. Sixteen substances were preliminarily selected. The EICs of the 16 antibiotic substances were refined with the excretion rate of the parent substances. Ten antibiotic substances were identified to have EIC-corrected greater than $1{\mu}g/l$, which include Amoxicillin ($15.8{\mu}g/l$), Cefaclor ($10.1{\mu}/l$), Roxithromycin ($4.2{\mu}g/l$), Cephradine ($4.5{\mu}g/l$), Cefatrizine ($2.6{\mu}g/l$), Cefadroxil ($3.3{\mu}g/l$), Aztreonam ($2.3{\mu}g/l$), Ceftazidime ($2.8{\mu}g/l$), Ribostamycin ($1.3{\mu}g/l$), and Ceftezole ($1.3{\mu}g/l$). Additional risk assessments for these antibiotic substances are suggested.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.50-54
• /
• 2002

The plate bucking is very important design criteria when the ship is composed of high tensile steel plates. The structures under the action of excessive exhibit local failure associated with bucking until they reach the ultimate limit state as a whole. Precise assessment of the behaviour of plate above primary buckling load is important. In this connection, series of elastic plastic large deflection analyses are performed on rectangular plates with aspect ratio 1.4 applying the finite element method. In this paper, the buckling/plastic collapse behavior of ship plates with secondary buckling is investigated. It has found that the other deflection componentes also increase with the increase of compressive load above the primary buckling load.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.299-311
• /
• 2003

This paper presents a finite element procedure to estimate the ultimate strength of space frames considering spread of plasticity. The improved displacement field is introduced based on the inclusion of second-order terms of finite rotations. All the non-linear terms due to bending moment, torsional moment, and axial force are precisely considered. The concept of plastic hinges is introduced and the incremental load/displacement method is applied for elasto-plastic analyses. The initial yield surface is defined based on the residual stress, and the full plastification surface is considered under the combined action of axial forces, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for the ultimate strength of space frames are compared with available solutions and experimental results.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.1
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.2
• /
• pp.188-198
• /
• 2013

In constructing a collision avoidance system, it is important to determine the time for starting collision avoidance maneuver. Many researchers have attempted to formulate various indices by applying a range of techniques. Among these indices, collision risk obtained by combining Distance to the Closest Point of Approach (DCPA) and Time to the Closest Point of Approach (TCPA) information with fuzzy theory is mostly used. However, the collision risk has a limit, in that membership functions of DCPA and TCPA are empirically determined. In addition, the collision risk is not able to consider several critical collision conditions where the target ship fails to take appropriate actions. It is therefore necessary to design a new concept based on logical approaches. In this paper, a collision ratio is proposed, which is the expected ratio of unavoidable paths to total paths under suitably characterized operation conditions. Total paths are determined by considering categories such as action space and methodology of avoidance. The International Regulations for Preventing Collisions at Sea (1972) and collision avoidance rules (2001) are considered to solve the slower ship's dilemma. Different methods which are based on a constant speed model and simulated speed model are used to calculate the relative positions between own ship and target ship. In the simulated speed model, fuzzy control is applied to determination of command rudder angle. At various encounter situations, the time histories of the collision ratio based on the simulated speed model are compared with those based on the constant speed model.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.645-648
• /
• 2008

Due to the rapid increase super high-rise buildings and multi-complex spaces, the space of a staged a very complex and variety of situations occur in the space of the building. The management is still based on limited information obtained by the administrator depends on the decision is made. However, the ability of human beings during a limited time, analysis limited information, and there is a limit to take the appropriate action and situation. To overcome these limitations high information technology that can be fused to take advantage of ubiquitous system is to offer. The aim of this study is on object-oriented 3D data and collected information about the status of the 3D data extraction, to exchange data between systems, the use of object-oriented 3D data, and I studied common space information of a multi-use facilities extracted from 3D CAD information to send to the GIS system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1097-1100
• /
• 2008

The purpose of this study to investigate the bond strength of recycled coarse aggregate concrete deteriorated by freezing and thawing. Concrete specimens with recycled coarse aggregate representing lower limit of the quality standard (water absorption : 3.0%, specific gravity : $2.5g.cm^3$) were manufactured and tested. The replacement ratio (0, 30, 60 and 100%) of recycled coarse aggregate and freezing-thawing cycles were considered in this test. From the test results, it was found that the bond strength of normal strength concrete is not affected by the replacement ratio of recycled coarse aggregate under freezing and thawing conditions. Also, the bond strength of the natural and recycled coarse aggregate concrete using AE admixtures was not decreased by frost action.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.225-228
• /
• 2008

This paper presents out-of-plane shear strength models for composite wall with steel plates based on limit theorem in the framework of the plasticity theory. The formulas proposed by JEAG 4618 need to be reconsidered with a couple of limitations; ignoring the effect of bond stress generated by studs in the process of calculating arch action, illogically discriminating between concrete shear cracking strength and arch strength by algebraic relation in short shear span ratio(0-2.0). In most cases, reinforcement ratio is not sufficient to yield, as a result, arch strength is determined by accounting equilibrium including both bond strength and concrete compressive strength. We conducted experimental research assuming that SC wall is a continuous beam under the simplified loading patterns, changing main valuables involving the number of studs, stirrups. The results show good agreements with the formula and we quoted the test results of JEAG.