• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.26-33
• /
• 1998

Acoustical properties of chestnut and paulownia woods have been determined in four film thicknesses of oriental lacquering and cashew varnishing on double surfaces of soundboard to elucidate effects of finishing. Accelerometer was attached to the specimen at one third position from one end, and specimen was hit by the impact hammer at one third position from opposite end. Data were processed by vibration analyzer. The ratio of axial-to-transverse sound velocity of untreated specimens of chestnut and paulownia were 3.25 and 5.34, respectively. Natural frequency, specific Young's modulus, acoustical coefficient, sound velocity, damping of sound radiation(DSR) and acoustical converting efficiency(ACE) decreased by oriental lacquering and cashew varnishing for both species. Damping of internal friction of chestnut decreased by oriental lacquering and cashew varnishing, but that of paulownia increased. Natural frequency. specific Young's modulus, acoustical coefficient, sound velocity, and DSR decreased with increased film thickness of both finishing materials. However, damping of internal friction and ACE showed irregular tendency with increased film thickness. Acoustical properties of cashew varnished chestnut specimen were better than those of oriental lacquered specimen. Acoustical properties of oriental lacquered paulownia specimen were better than those of cashew varnished specimen.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.988-995
• /
• 2005

Vibration has been severly increased at the branch pipe of main steam header since the commercial operation of nuclear power plant. Intense broad band disturbance flow at the discontinuous region such as elbow, valve, and header generates the acoustical pulsation which is propagated through the piping system. The pulsation becomes the source of low frequency vibration at piping system. If it coincide with natural frequency of the pipe system, excessive vibration is made. High level vibration due to the pressure pulsation related to high dynamic stress, and ultimately, to failure probability affects fatally the reliability and confidence of plant piping system. This paper discusses vibration effect for the branch pipe system due to acoustical pulsations by broad band disturbance flow at the large main steam header in 700 MW nuclear power plant. The exciting sources and response of the piping system are investigated by using on-site measurements and analytical approaches. It is identified that excessive vibration is caused by acoustical pulsations of 1.3 Hz, 4.4 Hz and 6.6 Hz transmitted from main steam balance header, which are coincided with fundamental natural frequencies of the piping structure. The energy absorbing restraints with additional stiffness and damping factor were installed to reduce excessive vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.780-785
• /
• 2005

Vibration has been severly increased at the branch pipe of main steam header since the commercial operation of a nuclear power plant. Intense broad band disturbance flow at the discontinuous region such as elbow, valve or heather generates the acoustical pulsation which is propagated through the piping system. The pulsation becomes the source of low frequency vibration at piping system. If it coincide with natural frequency of the pipe system, excessive vibration is made. High level vibration due to the pressure pulsation related to high dynamic stress, and ultimately, to failure probability affects fatally the reliability and confidence of plant piping system. This paper discusses vibration effect for the branch pipe system due to acoustical pulsations by broad band disturbance flow at the large main steam header in 7nn nuclear power plant. The exciting sources and response or the piping system are investigated by using on site measurements and analytical approaches. It is identified that excessive vibration is caused by acoustical pulsations of 1.3Hz, 4.4Hz and 6.6Hz transferred from main steam header, which are coincided with fundamental natural frequencies of the piping structure. The energy absorbing restraints with additional stiffness were installed to reduce excessive vibration.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.37-43
• /
• 1997

A frequency-variable ultrasonic vibrator is designed, which is made of a multi-layered PZT vibrator with a conical horn. Transmission line equations for the conical horn are derived and analyzed using the equivalent circuit method in order to analyze the characteristics of the vibrator. The controllability of the driving characteristics by varying the electrical impedance is confirmed by the experimental results of the free admittance characteristics and the vibrational velocity distributions.

• The Journal of the Acoustical Society of Korea
• /
• 제24권2E호
• /
• pp.54-60
• /
• 2005

A new multichannel blind deconvolution algorithm is proposed for speech mixtures. It employs unidirectional filters and normalization of gradient terms in the frequency domain. The proposed algorithm is shown to be approximately nonholonomic. Thus it provides improved convergence and separation performances without whitening effect for nonstationary sources such as speech and audio signals. Simulations using real world recordings confirm superior performances over existing algorithms and its usefulness for real applications.

• 한국음향학회지
• /
• 제21권8호
• /
• pp.757-765
• /
• 2002

본 논문은 해석과 실험을 통하여 구형 압전 변환기의 점대칭 방사모드 진동 특성을 규명하는 것을 목적으로 한다. 반경 방향 좌표와 시간의 함수인 반경 방향 변위와 전기 퍼텐셜로 표현되는 지배방정식을 구성한다. 역학적 경계조건과 전기적 경계조건을 적용하여 방사 진동의 특성방정식을 유도한다. 이 식을 이용하여 압전 고유진동수를 계산하고, 그 결과를 측정 결과와 비교한다. 수치계산을 통하여 압전 공진과 탄성 공진의 차이, 구형 압전체의 반경 및 두께에 따른 고유진동수 등을 고찰한다. 그 결과 1차 방사모드의 고유진동수 크기는 압전현상으로 인해 작아지며 구형의 곡률 반지름이 커짐에 따라 지수함수적으로 작아지는 것을 알게 되었다.

• 한국음향학회지
• /
• 제9권2호
• /
• pp.14-24
• /
• 1990

본 논문에서는 열박음 부분을 모델링하여 그 부분에서의 단위길이당 스프링강성을 산정한다음 전달매트릭스를 구하였다. 여기에 MYKLESTAD 방법을 토대로 하여 축의 전달매트릭스를 구하였다. 열박음축에 대해서는 수축공차에 따른 고유진동수를 구하였으며, 열박음효과의 효율성을 위하여 똑같은 크기의 열박음 하지 않은 축과 비교검토 하였으며 이를 실험으로 검토하였다. 연구결과 수축공자가 커지면 커질수록 단위길이당 스프링강성은 증가 하였고 고유진동수도 증가하였다. 그리고 열박음축은 열박음 하지 않은 축보다 고유진동수가 감소하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.82-89
• /
• 2002

The need of ultra-precision machine tools, which manufacture and machine the high precision parts used in computers, semi-conductors and other precision machines, has been increased over years. Therefore it is important to design the driving parts, which affect significantly on their performances. In this paper, the dynamic analyses on the belt-driven system were explored. Relation of the acoustical natural frequency and the tension of belt was derived and presented through experiments. Also, while the dynamic loads on motor system were changed, dynamic deflections were calculated through finite element analysis. Nonlinear characteristics of the bearings having an effect on the dynamic performance were studied and the belt connecting the motor (driving part) to spindle of a machine tool (driven part) was modeled as truss and beam elements fur simulations under various conditions, and a beam element model was verified to be more useful.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.103-106
• /
• 1998

본 논문은 상용 FEM-BEM 프로그램을 사용하여 점-조화 가진(harmonic point excitation)에 의한 자유지지 경계 조건을 갖는 원통 셸(cylindrical shell)의 방사 효율(radiation efficiency) 실험의 결과와 비교하였다. 우선 충격 해머 실험(impact hammer test)을 통한 모드 시험(modal testing)으로 원통 셸의 공진 주파수(natural frequency)와 모드 형상(mode shape)의 특징을 살펴보고 다음으로 점-조화 가진에 의한 원통 셸의 방사 효율을 SYSNOISE와 ANSYS로 해석해 보았다. 동시에 음향 세기 실험을 통한 방사 효율을 측정하여 전산 해석의 결과와 실험의 결과를 비교해 보았다.

• The Journal of the Acoustical Society of Korea
• /
• 제25권4E호
• /
• pp.148-153
• /
• 2006

A new normalized MBD algorithm is presented for nonstationary convolutive mixtures and its properties/modifications are discussed in details. The proposed algorithm normalizes the signal spectrum in the frequency domain to provide faster stable convergence and improved separation without whitening effect. Modifications such as nonholonomic constraints and off-diagonal learning to the proposed algorithm are also discussed. Simulation results using a real-world recording confirm superior performanceof the proposed algorithm and its usefulness in real world applications.