• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.199-200
• /
• 2010

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.75-76
• /
• 2003

Direct numerical simulation results of aeolian tones generated by a two-dimensional obstacle (circular cylinder, square cylinder, NACA0012 airfoil) in a uniform flow are presented and the generation and propagation mechanisms of the sound are discussed. The unsteady compressible Navier-Stokes equations are solved by a highly-accurate finite difference scheme over the entire region from near to far fields. The direct numerical simulation results are also compared with the results obtained by Curle's acoustic analogy.

• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.134-140
• /
• 2015

전통적인 뜸 요법은 시술자의 주관적이고 정성적인 치료로 인해 환자의 피부에 강한 열 자극이 가해져 심한 통증을 주거나 화상을 입히는 문제점을 갖고 있다. 이러한 한계를 극복하기 위한 대안으로 객관성과 정량화가 가능한 초음파를 활용한 뜸 자극 치료기술이 주목받고 있다. 하지만, 초음파 에너지를 열에너지로 변환하기 위해서는 초음파 치료기기의 음향렌즈에 따른 초음파 집속 특성 분석이 필요하다. 따라서, 본 논문에서는 초음파 집속 특성에 영향을 주는 음향렌즈의 형태(오목렌즈, 계단형 렌즈)에 따른 집속 시뮬레이션을 통해 각 렌즈의 음압 분포, 음압의 크기, 초점의 위치를 계산하였으며, 설계한 렌즈를 제작하여 음압 측정 실험을 통해 음향렌즈의 집속 성능을 검증하였다.

• 한국항해항만학회지
• /
• 제35권8호
• /
• pp.643-647
• /
• 2011

이 논문에서는 수중음향통신의 성능 저해 요소 가운데 하나인 다중경로로 인한 인접 심벌간의 간섭(Inter-Symbol Interference)을 극복하기 위하여 직접 수열 대역확산(Direct Sequence Spread Spectrum) 기법의 적용성에 관해 연구하였다. 직접 수열 대역확산 방식은 육상이동통신 분야에서는 이미 널리 적용되고 있으나 수중음향통신에서는 상대적으로 적은 관심을 받았다. 이에 그 적용성을 검증하기 위해 실제 수중 채널에서 수집한 채널 응답 함수를 이용하여 모의실험을 수행한 결과 일반적인 QPSK (Quadrature Phase Shift Keying) 기법의 경우 BER(Bit Error Rate)이 $6.73{\times}10^{-3}$이였으며, 직접 수열 대역확산기법이 적용된 경우 BER이 $1.14{\times}10^{-1}$으로 일반적인 QPSK에 비해 향상된 성능을 나타내는 것을 확인할 수 있었다. 근거리 해상 실험을 수행한 결과 일반적인 QPSK 기법의 경우 전송률 1 kbps에서 BER이 $3.19{\times}10^{-1}$이였으며, 직접 수열 대역확산 기법이 적용된 경우 BER이 $5.17{\times}10^{-4}$이었다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.3-9
• /
• 1998

Since the introduction of hands-free phone set and teleconferencing system, acoustic echo cancellation has been a challenge for engineers. Recently many researches have shown that the best solution for the acoustic echo compensation problem is represented by an adaptive filter which iteratively tries to identify the unknown impulse response of the system from loudspeaker to microphone. In this paper, we apply the delayless subband adaptive filters and fast affine projection algorithm for the identification of room impulse response. Simulation results show 3∼8 dB more enhanced performance than conventional fullband adaptive filters or subband adaptive filters. In addition, fast affine projection algorithm shows better convergence speed at the expense of the low computational complexity than conventional LMS algorithm.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.386-389
• /
• 2004

Beamforming for underwater acoustic communication is affected by the broadband feature of underwater acoustic communication signal, which has the low center frequency compared to the signal bandwidth. In this paper, the baseband equivalent array signal model is derived and we present computer simulation results for the broadband finite impulse response (FIR) beamformer performance according to the FIR filter order and the tap spacing. If the FIR filter order is increased above the optimum value, the beamformer performance is degraded. Also the tap spacing is related to the optimum FIR filter order.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.421-427
• /
• 2004

In order to exploit underwater resources successfully, the first step would be a marine environmental research and exploration in the seafloor. Generally one sets up a long-term underwater experimental unit in the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. In this paper we presents a robust underwater sound recognition algorithm by which we can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for the acoustic releaser which requires low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through simulation methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.52-57
• /
• 2005

This paper describes a fabrication method of a circular diaphragm using boron etching stop method. It will be applied to acoustic transducers such as microphones or microspeakers and so on. The sensitivity is expected to be increased with the circular diaphragm through the simulation results to compare with a general rectangular diaphragm. The borondoped layer which is doped with solid source is sufficient for achieving an etching stop in 20 wt% TMAH, and the thickness is about $7.4{\mu}m$. The diameter of the circular silicon nitride diaphragm was measured to be 2 mm with $1{\mu}m$ thickness. The fabrication of piezoelectric acoustic devices was completed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.123-126
• /
• 2000

In this paper, the portable game machine called W"alking Beat" is designed and implemented not only to propose the new possibilities for the peripheral equipment market of portable acoustic machine but also to overcome the limitation of the acoustic simulation game machine such as the existing Beat Mania. The old game machine can be used only in a particular place, where it is installed. However, in order to get over the constraint on this space problem "Walking Beat Game Machine" is designed to facilitate the portability. In addition, the frequency analysis method using FFT algorithm is employed by regarding the music data for the portable digital acoustic machine as source so that the limitation that the existing game machine depends heavily on the previously registered game contents can be overcome. By making it possible to play games for all the music and putting an emphasis on multimedia trend only to listen to the music, it is speculated that it can contribute to the development of the new culture in the near future.

• The Journal of the Acoustical Society of Korea
• /
• 제20권3E호
• /
• pp.10-17
• /
• 2001

The possibility is investigated of determining the diffuse absorption coefficients of the wall surfaces in a real room by minimizing the errors between the measured energy impulse response of a real room and the predicted energy impulse responses obtained from the ray tracing simulation of the room. In other words, this can possibly serve as a basis for "acoustical system identification" in attempting to determine the "best fit" of modelled absorption coefficients to measured energy response data. Algorithms for attempting this were investigated. The algorithms developed for this purpose proved to be rigorous and efficient. Instead of using the ray tracing model to determine the absorption coefficients, the phase image model was used in order to determine the acoustic impedances of wall surfaces. However, the numerical algorithms could not find the correct impedance values, primarily due to the wide range of the acoustic impedance values of any single acoustic material and very long computation time.