• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.6-11
• /
• 2019

In this study, we constructed the mathematical model to evaluate the roundness for plastic injection mold parts with complicated 3D curvatures. Mathematically we started off from the equation of circle and successfully derived an analytical solution so as to minimize the area of the residuals. On the other hand, we employed the numerical method the similar optimization process for the comparison. To verify the mathematical models, we manufactured and used a ball valve type plastic parts to apply the derived model. The plastic parts was fabricated under the process conditions of 220-ton injection mold machine with a raw material of polyester. we experimentally measured (x, y) position using 3D contact automated system and applied two mathematical methods to evaluated the accuracy of the mathematical models. We found that the analytical solution gives better accuracy of 0.4036 compared to 0.4872 of the numerical solution. The numerical method however may give adaptiveness and versatility for optional simulations such as a fixed center.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E2
• /
• pp.75-81
• /
• 2003

Variational data assimilation, which is recently introduced to the air quality modeling, is a promising tool for obtaining optimal estimates of initial conditions and other important parameters such as emission and deposition rates. In this paper. two advanced techniques for variational data assimilation, based on the adjoint and quasi-inverse methods, are tested for a simple air quality problem. The four-dimensional variational assimilation (4D-Var) requires to run an adjoint model to provide the gradient information in an iterative minimization process, whereas the inverse 3D-Var (I3D-Var) seeks for optimal initial conditions directly by running a quasi -inverse model. For a process with small dissipation, I3D-Vu outperforms 4D-Var in both computing time and accuracy. Hybrid application which combines I3D-Var and standard 4D-Var is also suggested for efficient data assimilation in air quality problems.

• Journal of Information Processing Systems
• /
• v.18 no.2
• /
• pp.223-234
• /
• 2022

The evaluation of the print quality of 3D printing has traditionally relied on manual work using dimensional measurements. However, the dimensional measurement method has an error value that depends on the person who measures it. Therefore, we propose the design of a new print quality measurement method that can be automatically measured using the field-of-view (FOV) model and the intersection over union (IoU) technique. First, the height information of the modeling is acquired from a camera; the output is measured by a sensor; and the images of the top and isometric views are acquired from the FOV model. The height information calculates the height ratio by calculating the percentage of modeling and output, and compares the 2D contour of the object on the image using the FOV model. The contour of the object is obtained from the image for 2D contour comparison and the IoU is calculated by comparing the areas of the contour regions. The accuracy of the automated measurement technique for determining, which derives the print quality value was calculated by averaging the IoU value corrected by the measurement error and the height ratio value.

• Structural Engineering and Mechanics
• /
• v.48 no.5
• /
• pp.587-613
• /
• 2013

A 3-node 3D co-rotational beam element using vectorial rotational variables is employed to consider the geometric nonlinearity in 3D space. To account for shape versatility and reinforced concrete cross-sections, fibre model has been derived and conducted. Numerical integration over the cross-section is performed, considering both normal and shear stresses. In addition, the derivations associated with material nonlinearity are given in terms of elasto-plastic incremental stress-strain relationship for both steel and concrete. Steel reinforcement is treated as elasto-plastic material with Von Mises yield criterion. Compressive concrete behaviour is described by Modified Kent and Park model, while tensile stiffening effect is taken into account as well. Through several numerical examples, it is shown that the proposed 3D co-rotational beam element with fibre model can be used to simulate steel and reinforced concrete framed structures with satisfactory accuracy and efficiency.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1093-1099
• /
• 2022

The number of buildings is increasing day by day. The next logical footstep is tackling challenges regarding scarcity of resources and sustainability, as well as shifting focus on existing building structures to renovate and retrofit. Many existing old and heritage buildings lack documentation, such as building models, despite their necessity. Technological advances allow us to use virtual reality, augmented reality, and mixed reality on mobile platforms in various aspects of the construction industry. For these purposes, having a BIM model or high detail 3D model is not always necessary, as a simpler model can serve the purpose within many mobile platforms. This paper streamlines a framework for generating a lightweight 3D model for mobile platforms. In doing so, we use an existing structure's site survey data for the foundation data, followed by mobile VR implementation. This research conducted a pilot study on an existing building. The study provides a process of swiftly generating a lightweight 3D model of a building with relative accuracy and cost savings.

• Journal of ILASS-Korea
• /
• v.25 no.1
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.3-5
• /
• 2005

Vessel boundary detection and modeling is a difficult but a necessary task in analyzing the mechanics of inflammation and the structure of the microvasculature. In this paper we present a method of analyzing the structure by means of an active contour model(using GVF Snake) for vessel boundary detection and 3D reconstruction. For this purpose we used a virtual vessel model and produced a phantom model. From these phantom images we obtained the contours of the vessel by GVF Snake and then reconstructed a 3D structure by using the coordinates of snakes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.146-153
• /
• 2012

RP system which is widely used to reduce the time of product development is to resolve the problem of cutting work. It is a method using laminated thin films to produce many forms. The RP equipment used for this experiment is FDM system. This can produce 3D model with using 3D CAD designed file within a relatively short time. Not only this, this system also through 3D file preparation, 3D product manufacture, removal support these 3 step operating process can easily produce goods, but product can be different from original design. This research has been conducted to minimize this error. To apply to the circular product made a circular specimen and measured several times with 3D scanner and find out average 99.622% of accuracy. This result is applied to RP system, and with this changed design produced a specimen, and found out the accuracy is increased to 99.958%. If this is applied to circular products, we can produce more precise products with less process.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.97-109
• /
• 2000

The purpose of this study is to apply 3D computer graphics in fashion design as a creative medium and it attempts to fine out what advantages 3D technique can offer to fashion design. For this purpose, this study, first, tries to develop a 3D digital model in which designer can select design, color , pattern and fabric palette whatever necessary . This study uses of the software named 'Poser of Fractal Design' and the and the 3D digital model comprises four stages ; body modeling, item design (item coordination), color design (color coordination), pattern and fabric design (pattern and fabric coordination). Secondly, this study seeks to accumulate a data base which was produced in the course of case studies, which have applied 3D digital model to design. The outcome of the case studies shows that 3D digital model can enhance designing in the following four aspects. ⅰ) It can give more freedom to designer to try various ideas, revise and modify them, It can also produce random generation. Through this process, the designer test various input and output without damage on fabric after revision and alteration. ⅱ) It can help designers to enhance their accuracy. Since fault in the design developed by the 3D digital model can be detected in advance, designers can make correlation before actual work begins. In the end, designers can express their ideas and intention accurately as well as freely. ⅲ) Since design developed by the 3D digital model can be shared on screen by various actors in the course of priduction such designers , merchandisers, and supervisors, it can help communication between and cut the time of feedback.ⅳ) By using the 3D digital model, designers can work from the begining with awareness of actual outcome their design, since the 3D digital model provide animation, which helps designers to envisage visual changes as they apply various items, colors, pattern and fabrics.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.325-330
• /
• 2014

Eddy current induction is used in a wide range of electronic devices, for example in detection sensors. Due to the advances in computer hardware and software, the need for 3D computation and system comprehension is a requirement to develop and optimize such devices nowadays. Pure theoretical models are mostly limited to special cases. On the other hand, the classical use of commercial Finite Element (FE) electromagnetic 3D models is not computationally efficient and lacks modeling flexibility or robustness. The proposed approach focuses on: (1) implementing theoretical formulations in 3D (FE) model of a detection device as well as (2) an automatic Volumetric Estimation Method (VEM) developed to selectively model the target finite elements. Due to these two approaches, this model is suitable for parametric studies and optimization of the number, location, shape, and size of PCB receivers in order to get the desired target discrimination information preserving high accuracy with tenfold reduction in computation time compared to commercial FE software.