• Architectural research
• /
• 제7권1호
• /
• pp.11-18
• /
• 2005

In today's building industry the emphasis has been geared more towards construction, thus building maintenance and life cycle have been neglected until now. A direct result of this neglect is the rapid aging of building, which leads to more cost-effective decision making methods for the prolongation of building life span. The following study is conducted in the area of Daegu and Seoul in order to develop the estimation analysis method of the annual operation cost of the Korean high-rise condominiums for the cost-effective decision making support through mathematical and statistical analyses including the present value and standardized measurement corrections. Based on the assumption that the life expectancy of the high rise condominium is 50 years, initial cost is ￦421,212/$m^2$, and a total sum of yearly operation cost during life expectancy is ￦2,154,499//$m^2$), yearly accumulated operation cost is shown as below: $AOC=0.7097t^4-38.803t^3+806.95t^2+11045t-496.52$ ($R^2=0.98$) (Here, AOC = Accumulated Operation Cost, t = given years)

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.452-460
• /
• 2001

Most of researches of tolerance optimization have used a simple sum of tolerance-cost functions with several constraint equations as an optimization model. However, if there is a machining sequence with more than one processes to complete a part, and machining failure, i.e., out-of-tolerance occurs at one of the intermediate processes, the tolerance-cost of this process should be added by the machining cost of all the previous processes already completed on the part. In this study, an accumulated scrap cost model(ASCM) is proposed considering the scrapped machining cost, and applied to a simple assembly example. The result of tolerance optimization using ASCM is compared with that of using a traditional optimization model to confirm its effectiveness.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.845-850
• /
• 2009

Localization which estimates a robot's position and orientation in a given environment is very important for mobile robot navigation. Although low-cost sensors are preferred for practical service robots, they suffer from the inaccurate and insufficient range information. This paper proposes a novel approach to increasing the success rate of low-cost sensor-based localization. In this paper, both the previous and the current data obtained from the IR sensors are used for localization in order to utilize as much environment information as possible without increasing the number of sensors. The sensor model used in the monte carlo localization (MCL) is modified so that the accumulated range information may be used to increase the accuracy in estimating the current robot pose. The experimental results show that the proposed method can robustly estimate the robot's pose in indoor environments with several similar places.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.63-68
• /
• 2001

In this study the main elements which can be commonly adopted to every kind of business are selected through the research, case-study, benchmarking common items of a direct or indirect loss cost. As a result of the development of a program for evaluating loss cost a case or accumulated data can be easily managed through estimating the direct and indirect loss cost as tell as the ratio between directs and indirect cost. The program is fit to case-study and we are compared direct cost with indirect cost. Automatically, this program showed ratio between directs and indirect cost for style, scale of accident The person in charge of safety and hygiene can have better chances to get into management also the owner or the CEO can recognize the importance of management of safety and hygiene. So this can guide the company to invest in a prevention of disaster and to adopt a safety and hygiene management promote the prevention activity of a company, and finally decrease the accident rate in the country.

• 산업공학
• /
• 제8권1호
• /
• pp.31-43
• /
• 1995

This study is intended to develop a technology cost model (TCM) which treats technology costs appropriately under present advanced manufacturing technology environment. TCM is composed of two elements : cost classification system and cost allocation model. It is proposed to include technology-related department expenses as well as technology investment in the categories of technology costs. For the cost allocation, technology activities are divided into four homogeneous groups. Costs are accumulated into one of the four cost pools and allocated to the cost object using the pool's unique allocation base. It is also proposed to use the capital recovery costs including interest expense rather than the depreciation costs for an invested capital. A case study is performed to verify the applicability of the developed model.

• 한국건설관리학회논문집
• /
• 제21권6호
• /
• pp.113-124
• /
• 2020

노후화된 공동주택을 리모델링을 통하여 성능개선을 하고자 하는 사회적 움직임이 포착되고 있다. 이를 위해 리모델링의 공사비 분석, 구조 분석, 정치제도적 검토등이 진행되어 리모델링을 활성화방안이 제시되고 있다. 그러나 현재 공동주택 리모델링의 공사비 분석방법이 연구상으로 제시되고 있으나, 실무적 활용가능성에서 한계점이 존재하는 상황이다. 구체적으로, 실무적으로 활용되기 위해서는 현재 진행되었거나 진행 중인 사례에는 적용가능하지만 향후 발생할 사례 또한 공사비분석에 활용되기에 분석방법의 지속 가능성이 결여되어 있다. 따라서 본 연구에서는 공동주택 리모델링 공사비견적의 지속가능성을 위해 자동화된 견적방법을 제시하고자 한다. 공사비견적의 지속가능성을 위해서 Deep-Learning을 견적절차에 도입하였다. 구체적으로, 공동주택 리모델링에서 발생할 수 있는 설계요소,공종, 공사비 상승계수의 관계를 자동적으로 찾는 방안을 제시하였다. 추가적으로 Artificial Neural Network기반 견적의 태생적인 한계점인 불확실성 미반영을 보완하고자 Monte Carlo Simulation을 견적절차에 산입하였다. 사례가 누적될수록 더 높은 정확도를 제시하기 위하여 견적결과를 기존의 누적데이터와 비교를 하여 더 높은 정확도를 산출하는 방안 또한 제시되었다. 본 연구에서 제안한 자동화된 개산견적의 지속가능성을 검토하고자 13개 사례의 학습절차와 추가 2개 사례의 누적절차를 거쳤다. 결과적으로 추가된 2개 프로젝트의 특성이 반영된 새로운 공사비견적절차가 자동적으로 제시되었다. 본 연구에서는 15개의 사례를 활용하여 개산견적의 방안을 활용하였으나, 사례가 누적되어 반영될 경우 본 연구의 기대효과는 더욱 높아질 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.235-236
• /
• 2016

The importance of construction management has been increasing due to the fact that complex construction projects blend several different industries depending on the traits of the construction. This research was conducted to search for a method to enhance efficiency in cost management of construction project and meet the need for reusability of accumulated construction information. The process of detailed estimation and methodology for using standard unit price information has been developed to strengthen the interoperability in cost information by utilizing a standard classification system. The concept of ontology is proposed as a method of connecting construction information based on a standard breakdown structure to increasing the connectivity of the cost information in the construction project. Therefore, construction information knowledge framework is developed in order to improve the efficiency of the detailed estimation work process.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.195-203
• /
• 2011

Not only does the labor of manufacturers used most in the drying process after rice harvest, but it also is having huge influence in quality. Also, because drying storage of rice production around the whole country is scarce with original facility, it has become a very important matter that farms develop their own safe and high-quality facilities to store and dry rice. Therefore, this study developed a small scale accumulated storage and drying bin, assessed nalyzed drying properties, and conducted analysis of research on the property of quality when storing for a long time. As a result, the drying speed of the small scale accumulated storage and drying bin was adequate of 0.042%/hr and was shown that the experimental static pressure and theoretical static pressure corresponded. Also, it was shown that drying cost was up to about 6 times inexpensive that heated air drying. For the storage of the small scale accumulated storage and drying bin, average of moisture content was around 16.5 until early April and decreased to 15.7% in July. Inside storage was maintained to 12.13% until early April and slightly increased to 14% after May. It was shown that inside storage had higher hardness and rate of cracking than the small scale accumulated storage and drying bin by storage conditions and germination rate was shown a little higher when stored in the small scale accumulated storage and drying bin.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.451-454
• /
• 2003

In this paper, the research trend and the sate-of-the-art of low cost motor drives are introduced with the recently increasing interest In various industrial applications, such as home appliance, hybrid electric vehicles, wind power systems, fuel cell systems, and etc. Based on this presented work, it is highly expected the power electronics technologies, which are accumulated through the last 20 years, can be effectively applied to actual application fields.

• 대한산업공학회지
• /
• 제26권1호
• /
• pp.66-72
• /
• 2000

Inventory management of a product not to be produced any more has a great impact on the financial status of a company. Clearance pricing can make bigger sales volume together with great savings of inventory holding cost specially for a durable goods with relatively large inventory carrying cost and accordingly cash inflow can be improved. This paper deals with the inventory management by non-linear clearance pricing with the sales rate which depends on the accumulated sales volume and selling price.