• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제30권4호
• /
• pp.347-355
• /
• 2023

For numerical evaluation of Cauchy principal value integrals, we present a simple rational function with a parameter satisfying some reasonable conditions. The proposed rational function is employed in coordinate transformation for accelerating the accuracy of the Gauss quadrature rule. The efficiency of the proposed rational transformation method is demonstrated by the numerical result of a selected test example.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.445-450
• /
• 2003

This study was performed 10 develop the accelerated life test method using Weibull-IPL(Inverse Power Law) model for mechanical components. Weibull-IPL model is concerned with determining the assurance life with confidence level and the accelerated life test time From the relation of weibull distribution factors and confidence limit, the testing times on the no number of failure acceptance criteria arc determined. The mechanical components generally represent wear and fatigue characteristics as a failure mode. IPL based on the cumulative damage theory is applied effectively the mechanical components to reduce the testing time and to achieve the accelerating test conditions. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% confidence level for one test sample. According to IPL, because test time call be shorten in case increase test load test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.384-389
• /
• 2008

An accelerated fatigue test is essentially required to maintain the reliability of the actual structure of KTX under operation conditions. However, actual fatigue life cannot be obtained if specimens are not adequate to the conventional fatigue test. Moreover component maker did not provide data of loading stress (S) - cycles at the failure (N). In this study, we suggest a prediction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data, and then, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.69-70
• /
• 2017

In Korea, silicone type sealant is widely used for construction site. Before the silicone type, urethane type is one of the main type sealants. However, the weathering property is less than the silicone type, the urethane type is replace by the silicone one. Still the urethane type is used for the inside of the buildings for the perimeter of the window. The silicone type sealants are better in weathering property than those of the urethane type sealants. Except the weathering property urethane type sealant has its own advantage like movement property, low cost and so forth. There are many research results for the outdoor weathering of the sealants, but in Korea there are no results for the outdoor weathering for construction sealants. This research is focused on the outdoor weathering of the urethane sealants, how to measure the degradation, and compare the products which used in Korea. The outdoor weathering test is usually time consuming, thus we designed specialized device for accelerating the result.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.62-67
• /
• 2002

This paper provides the results of accelerated aging test of 18kV ZnO lightning arresters to investigate the leakage current characteristics. It was impossible to establish the replacement criterion for field operating lightning arrester because conventional aging test was only focused on the aging of ZnO elements. In general, it is possible to replace the aged arresters before the failure in the field using the leakage current measurement because it must be increased by the aging. But we can not use the method because we don't know the characteristics of the installed lightning arresters. Therefore in this paper we applied operating voltage and accelerating cycle which consists of temperature and humidity to the arresters. Then we measured the variation of total and resistive leakage current and found out the characteristics of the acted lightning arresters.

• 한국지반환경공학회 논문집
• /
• 제12권10호
• /
• pp.5-12
• /
• 2011

최근 국내에서는 지반개량 재료로 무기질계 급결재와 초미립자 시멘트를 주원료로 하는 NDS(Natural and Durable Stabilizer)공법 등의 개발이 활발하게 연구되어 왔다. 하지만 기존의 연구에서는 NDS의 재령일별 강도발현 과정에 있어서의 화학적인 변화과정 및 강도발현의 원리를 설명해 주지는 못하고 있는 실정이었다. 따라서 무기질계 주입재의 대중화를 위해서는 경화과정의 메커니즘 규명이 확실하게 선행되어야 한다고 판단하였고, 일축압축시험, SEM분석, XRD분석을 재령일 별로 실시하여 각각의 결과값을 분석하였다. 또한 그 특징을 더욱 분명히 구별하기 위하여 물유리계 주입재의 대표적인 예인 SGR 또한 동일한 시험을 실시하여 비교대상으로 하였다. 시험결과 NDS의 강도발현 메커니즘을 일축압축강도-SEM-XRD의 유기적 상관성을 통해 도출할 수 있었고 그 성능의 우수함을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제12권1호
• /
• pp.1-7
• /
• 2024

다공성인 콘크리트에서는 외부의 수분 및 염화물 유입이 발생하며, 이는 매립된 철근의 부식을 야기한다. 본 연구에서는 촉진부식실험(ICM: Impressed Current Method)를 이용하여 10 V의 전압을 인가하였으며, 이에 따라 10 % 수준까지 부식량을 조절하였다. 부식량은 부식전류량 누계와 선형적인 관계가 도출되었으며, 균열의 영향으로 부식 유도 시간에 따라 2차 함수의 형태로 증가하였다. 부착응력에 대해서는 OPC 콘크리트에 대해서는 부식량 3.0 % 이후 급격한 부착응력의 감소가 발생하였다. 또한 치환률 30 %의 슬래그 콘크리트에서는 일반 콘크리트에 비하여 51.4~71.6 %의 낮은 부식량을 나타내었으며 5일간의 촉진실험에도 일정 수준의 부착강도를 유지하였다.

• 유기물자원화
• /
• 제18권2호
• /
• pp.62-70
• /
• 2010

하수슬러지에 전자빔(3kGy)을 조사하여 퇴비화를 촉진하기위한 타당성연구가 수행되었다. 전자빔을 조사한 하수슬러지 탈수케익에 수분조절 및 탄소공급원으로 건조한 나뭇잎을 첨가하고 목편을 혼합한 퇴비단과 전자빔을 조사하지 않은 퇴비단(Control) 과의 시간에 따른 온도변화, 유기물 및 영양염류변화 그리고 미생물 활동도 차이 등을 비교평가하였다. 그 결과 전자빔조사한 하수슬러지퇴비단은 1일이내에 $60^{\circ}C$이상 온도가 상승하였고 Control 퇴비단에 비해 고온기간이 5일 이상 더 지속되었다. 또한 초기 5일 이내에 주발효기간 20일 동안 분해된 전체 유기물양의 70%가 분해되는 등 신속한 퇴비화가 진행되었으며, 퇴비화기간 내내 Control 퇴비단에 비해 DHAe-INT로 측정한 미생물 활동도가 높게 유지되어 전자빔 전처리에 의해 하수슬러지 탈수케익의 퇴비부숙이 신속하고, 효율적으로 이루어짐을 알 수 있었다.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.142-147
• /
• 2018

Private electrical facilities are judged whether it is suitable for the insulation aging condition of their incoming underground cables using DC leakage current test method. In the case where the service point of utility is the secondary side of cut out switch installed in the electric pole, there is a problem that it is difficult to separate the lightning arresters(LA) because of their high position of the pole. Therefore, the field test voltage is applied at value lower than DC 30 kV, which are stated in the inspection guideline. However, this test could reduced the insulation performance of the LA by accelerating the electrical stress of the metal oxide varistor element in the pre-breakdown region. In this study, we analyzed the relationship between the DC test voltage and the leakage current using the non-destructive DC high voltage equipment with leakage current measurement function. The results show that the leakage current increases sharply above the specified test voltage. As a consequence, it could be contributed to improve insulation aging inspection method by selecting the possible test area on the VI characteristic curve of the pre-breakdown area of the LA.

• 연구논문집
• /
• 통권34호
• /
• pp.79-85
• /
• 2004

There are several types of life test method for hose assemblies. The two major tests used for hose assemblies are impulse test and burst test. And magnification adjustment of impulse pressure, heating of testing oil and repetitive motions of bending and straightening of testing hose are also performed for accelerating the life. According to the manufacture process of hose and swaging process of fitting, there is a difference in the life of hose assemblies from minimum 7 times to maximum 40 times during the life test in the same functioning condition. Like this, the life test of hose which has a wide scope of life distribution gives a problem that observation should take a long time to find out the existence of the bursting from the beginning of the test to the completion of bursting of hose assemblies. Therefore, this research proposes a process of concentrating on the defective section of hose assemblies and maximizing the life acceleration by giving 'Knockdown stress' to hose assemblies just until before the hose assemblies get out of order.