• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.631-636
• /
• 2017

The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.

• 한국태양에너지학회 논문집
• /
• 제40권2호
• /
• pp.11-23
• /
• 2020

The application of the high-performance insulation materials for buildings seems to be an essential measure for reducing energy use in buildings. Phenolic foam is a readily available insulation material with thermal conductivity of about 0.018 to 0.020 W/(mK). It has the advantage of higher thermal resistance and better fire resistance compared to other conventional building insulation materials. Insulation material used for building envelope is regarded as one of the decisive factors for building's energy load. Furthermore, the degradation of its thermal performance over time increasingly affects the building's energy use demand. Generally, the life span of conventionally built buildings is expected to be more than 50 years, so the long-term performance of insulation materials is critical. This paper aims to evaluate the long-term performance of phenolic form boards through an accelerated aging test. The tests were conducted according to BS EN 13166 and KS M ISO 11561. Based on the results of the accelerated aging test, the thermal performance variation of the material was analyzed, and then its aged value after 25 years was computed. Also, the characteristics of the phenolic foam board's long-term performance were also examined based on the standard testing methods adopted.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.443-446
• /
• 2009

본 연구에서는 기존의 접착제를 대체용 접착제로 대체 가능한지의 여부를 조사하기 위하여 구조용 접착제에 대해 일련의 열화 시험을 수행하였다. 구조용 접착제는 온도, 수분, 자외선 등의 자연환경 조건을 모사할 수 있는 가속노화시험기를 통해 복합적인 환경인자에서 1000시간 동안 노출시켰다. 구조용 접착제의 기계적 특성은 하중 시험기를 통해, 화학적 특성은 적외선 분광 분석 장치를 통해 평가하였다. 연구결과에 따르면 대체용 접착제가 환경인자에 노출될 경우 기존의 접착제에 비해 안정적이기 때문에 기존의 접착제는 대체용 접착제로 대체 가능할 것으로 판단하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.13-16
• /
• 2004

The reliability of 1.550m-wavelength InGaAs mesa waveguide photodiodes(WGPDs), which developed for 40-Gbps optical receiver applications, fabricated by metal organic chemical vapor deposition is investigated. Reliability is examined by both high-temperature storage tests and the accelerated life tests by monitoring dark current and breakdown voltage. The median device lifetime and the activation energy of the degradation mechanism are computed for WGPD test structures. From the accelerated life test results, the activation energy of the degradation mechanism and median lifetime of these devices in room temperature are extracted from the log-normal failure model by using average lifetime and the standard deviation of that lifetime in each test temperature. It is found that the WGPD structure yields devices with the median lifetime of much longer than $10^6$ h at practical use conditions. Consequently, this WGPD structure has sufficient characteristics for practical 40-Gbps optical receiver modules.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.295-301
• /
• 2010

원자력발전소 탄소강 배관의 유체가속부식은 주요 경년열화 현상이며 발전소의 성능 및 안전성을 저해할 수 있다. 유체가속부식 검사는 보온재 제거 및 설치로 상당한 비용이 수반되므로 최근에 보온재 제거가 필요 없고 원거리 검사가 가능한 유도초음파에 대한 관심이 점점 증가되고 있다. 유체가속부식 검출에 유도초음파 적용이 가능하다면 검사 비용 절감이 예상된다. 본 연구의 목적은 유체가속부식 손상 유무를 확인하고 결함 검출능을 결정하기 위함이다. 본 연구에서는, 실제 유체가속부식 손상 시험편의 엘보우 첫 번째 용접부와 두 번째 용접부의 진폭 감쇄비를 측정하기 위하여 3가지 검사 기법을 사용하였다. 연구 결과, 유체가속부식 손상을 검출하기 위한 최적의 검사 기법과 최소 결함 검출능을 도출하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1712-1717
• /
• 2007

This paper presents a derating design approach for reliability improvement of an aluminum electrolytic capacitor. The capacitor, usually mounted in a printed circuit board, is used to stabilize the circuit. The main failure mechanism of interest is dry-up of the electrolyte that is mainly caused by two stresses-temperature and voltage. The lifetime under these stresses is modeled as a function of these stresses and time using accelerated life testing. Quantitative variation in the lifetime, according to variations in these stresses, is investigated to perform the derating design of the capacitor so that the stress levels are selected to achieve required reliability measures for reliability improvement. Moreover, sensitivity analysis shows which stress would be a more important factor determining the lifetime.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.558-563
• /
• 2014

고분자 전해질 연료전지의 성능과 내구성에 미치는 막 전극 접합체(MEA) 제조방법의 영향에 대해 연구하기 위해 닥터 블레이드 방법, 스프레이 방법, 스크린 프린트 방법 그리고 스크린 프린트+스프레이 방법에 의해 MEA를 제조하였다. 제조된 MEA를 체결한 단위전지의 성능을 측정해 각 MEA의 초기 성능을 비교하였다. 10초간 0.6V 일정전압 유지 후 0.9 V에서 10초간 유지하는 전극 열화 가속 시험(AST)을 각 MEA 적용해 내구성을 시험하였다. 전극 열화 가속 시험 6,000 사이클 전 후 I-V 곡선, 임피던스, 순환 전압측정법(CV), 선형쓸음 전기량측정법(LSV), 투과전자현미경(TEM) 등을 측정하였다. 닥터 블레이드 방법에 의해 제조한 MEA의 초기 성능이 제일 높았고, 스크린 프린트+스프레이 방법에 의해 제조한 MEA가 제일 낮은 열화 속도를 보였다.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.149-155
• /
• 2009

The thermal decomposition behavior and degradation characteristics off our different thermotropic liquid crystalline polymers (TLCPs) were studied. The thermal decomposition behavior was determined by means of thermogravimetric analysis (TGA) at different heating rates in nitrogen and air. The order of the thermal stability was as follows: multi-aromatic polyester > hydroxybenzoic acid (HBA)/hydroxynaphthoic acid (HNA) copolyester > HNA/hydroxyl acetaniline (HAA)/terephthalic acid (TA) copolyester > HBA/Poly(ethylene terephthalate) (PET) copolyester. The activation energies of the thermal degradation were calculated by four multiple heating rate methods: Flynn-Wall, Friedman, Kissinger, and Kim-Park. The Flynn-Wall and Kim-Park methods were the most suitable methods to calculate the activation energy. Samples were exposed to an accelerated degradation test (ADT), under fixed conditions of heat ($63{\pm}3^{\circ}C$), humidity ($30{\pm}4%$) and Xenon arc radiation ($1.10\;W/m^2$), and the changes in surface morphology and color difference with time were determined. The TLCPs decomposed, discolored and cracked upon exposure to ultraviolet radiation.

• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.108-113
• /
• 2023

Pressure to reduce costs in the current solar market is driving the development and implementation of new module designs and prompting the use of new materials and components. In order to utilize the variability of each material that makes up the module, it is essential to understand the basic characteristics of the material. In this article, we evaluate light degradation after UV irradiation as an encapsulation material. Measure and analyze the results of various characteristic tests for discoloration, optical and electrical property degradation before and after UV accelerated testing. To evaluate weathering stability, UV tests were performed comparing existing EVA and UVT-EVA, POE and improved low-cost POE. Even in the weather resistance test with a total UV exposure of 60 kW/m², the properties of the encapsulants were mostly stable. EVA and POE-based encapsulants showed slight differences, and these slight differences are believed to pose a threat to long-term stability. This study is a basic analysis of encapsulation research for PV modules and will be helpful in understanding future development and encapsulant properties.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.157-164
• /
• 2006

본 논문에서는 다양한 환경인자에 노출된 상용 유리섬유강화(GFRP) 보강근의 내구특성에 대하여 기술하였다. 촉진실험방법을 이용하여 2종류의 GFRP보강근에 대하여 내구성 실험을 실시하였다. 총 264개 시편을 염화물 알칼리, 동결융해 상태에 최고 132일간 노출시켰다. CFRP 보강근의 내구특성은 촉진 실험된 보강근의 인장강도, 수평전단강도, 탄성계수를 원래 상태의 보강근의 결과와 비교하여 파악하였다. 실험결과에 따르면 촉진 실험된 GFRP 보강근의 재료적 특성은 심각하게 감소되었다. 단기 내구성 실험결과를 이용하여 GFRP 보강근의 장기 열화특성을 추정하였다.