• 한국수산과학회지
• /
• 제39권2호
• /
• pp.66-71
• /
• 2006

Fluoroquinoles have a wide range of antimicrobial properties and are effective in the treatment of bacterial diseases in fish. The use of fluoroquinoles continues to grow steadily. Fluoroquinolone antibiotics are probably the most important class used among synthetic antibiotics in human and veterinary medicines because of their broad activity spectrum and good oral absorption. This study was conducted to estimate the residue of antibiotics in four species of farmed fishes, including olive flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli), red sea bream (Pagrus major), and sea bass (Lateolabrax japonicus), collected from fish farms located in the southern coastal area of Korea. The residues of fluoroquinolones were determined using high performance liquid chromatography (HPLC) with a fluorescence detector. Residuals of five fluoroquinolones in muscle tissue of farmed fish were analyzed. We found that enrofloxacin was the most common agent in fish muscle, and that ciprofloxacin was the next most common. The range of detected concentrations of fluoroquinolones in olive flounder muscle was 0-0.859 mg/kg in 32.6% of all samples. Enrofloxacin was commonly detected in sea bass muscle at a range of 0-0.143 mg/kg in 38.9% of all samples. Fluoroquinolones were detected in 6.9% of black rock fish muscle and in 16.6% of sea bream, although the detected concentration was below 0.01 mg/kg. The maximum detection value of enrofloxacin and ofloxacin in olive flounder at the time of shipping was 0.102 mg/kg and 0.09 mg/kg, respectively; no other antimicrobials were detected. We detected no antimicrobial substances in red sea bream.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.73-81
• /
• 2017

The improved movable weir supplements the advantages and disadvantages of the rubber weir and the conduction gate. It consists of a stainless steel gate, air bags, and a steel clamping plate. The stainless steel gate is the main body of the weir, and the inflatable rubber sheet serves to support the steel gate. The steel clamping plate is typically in direct continuous contact with water, but this leads to corrosion issues that can reduce the life of the entire movable weir. In this study, a panel-type glass-fiber-reinforced polymer (GFRP) clamping plate was designed and fabricated. The test results showed that the flexural load of the panel-type GFRP composite clamping plate was over twice that of the wings type GFRP clamping plate. The lowest moisture absorption value was obtained upon exposure to tap water, and exposure to other solutions showed similar values. Additionally, flexural load testing after exposure to an accelerated environment found the lowest residual loads of 80.51 % and 78.50 % at 50 and 100 days, respectively, for exposure to a $CaCl_2$ solution, while exposure to other environments showed residual failure loads of over 80 % at both 50 and 100 days.

• Archives of Plastic Surgery
• /
• 제35권1호
• /
• pp.86-91
• /
• 2008

Purpose: The performance of rhinoplasty on the patient who has already undergone unsatisfactory results or complications after augmentation rhinoplasty is a challenging surgical problem. Because the dead space is remained after removal of the foreign body and the thickness of the skin is not even, the deformity would be more conspicuous if the nose is reconstructed again with hard implant only or autogenous cartilage. In these cases, the autogenous fascia can be used to get a good result. We present our clinical experience of secondary rhinoplasty using Scarpa's fascia of lower abdomen. Methods: Thirty-two patients underwent the procedure from March of 2002 to February of 2007. Nine patients were reconstructed with Scarpa's fascia only, eighteen patients were reconstructed with silicone implant and fascia, and five patients were reconstructed with cartilage and fascia for secondary rhinoplasty. Results: There were no major complications. Most of the patients were satisfied with the results. The deviation of the silicone implant and postoperative hypertrophic scar of the donor site were seen in one case each. Postoperative absorption of fascia were seen in two cases using Scarpa's fascia only. Conclusion: Secondary rhinoplasty using Scarpa's fascia is very useful method which offers a minimized donor site scar, low complication rate, shorter operation time and patient satisfaction and prevents the alopecia caused by the harvest of temporalis fascia.

• 한국물환경학회지
• /
• 제31권3호
• /
• pp.272-285
• /
• 2015

Accurate assessment of chlorophyll-a (Chl-a) concentrations in inland waters using remote sensing is challenging due to the optical complexity of case 2 waters. and the inherent optical properties (IOPs) of natural waters are the most significant factors affecting light propagation within water columns, and thus play indispensable roles on estimation of Chl-a concentrations. Despite its importance, no IOPs retrieval model was specifically developed for inland water bodies, although significant efforts were made on oceanic inversion models. So we have applied and validated a recently developed Red-NIR three-band model and an IOPs Inversion Model for estimating Chl-a concentration and deriving inland water IOPs in Lake Uiam. Three band and IOPs based Chl-a estimation model accuracy was assessed with samples collected in different seasons. The results indicate that this models can be used to accurately retrieve Chl-a concentration and absorption coefficients. For all datasets the determination coefficients of the 3-band models versus Chl-a concentration ranged 0.65 and 0.88 and IOPs based model versus Chl-a concentration varied from 0.73 to 0.83 respectively. and Comparison between 3-band and IOPs based models showed significant performance with decrease of root mean square error from 18% to 33.6%. The results of this study provides the potential of effective methods for remote monitoring and water quality management in turbid inland water bodies using hyper-spectral remote sensing.

• 한국화재소방학회논문지
• /
• 제30권3호
• /
• pp.16-22
• /
• 2016

소방공무원의 화상방지를 위해 소방보호복의 개발이 이루어지고 있으나, 보호 성능을 높이기 위해서 소재의 두께가 증가하고, 그럼으로 경량화 달성이 어려워지는 단점이 존재한다. 이를 극복하기 위한 여러 가지 방법 중 Phase Change Material(PCM, 상변화 물질)을 적용한 섬유를 소방보호복 안감에 적용하는 연구가 진행되고 있다. 기존 연구의 경우, 고온노출시 PCM 적용 섬유의 온도 특성에 대한 연구가 일부 있었으나, 화상 발생과의 직접적인 연관성을 살펴볼 수가 없다는 큰 단점이 존재한다. 본 연구에서는 짧은 시간 고열유속 상태의 돌발화염조건에 대해 현재 사용되고 있는 소방보호복 안감에 대한 PCM 적용 여부에 따라 2도 화상 발생 억제 효과를 수치계산을 통해 살펴보았다. 피부의 화상 해석을 위해 생체 열전달 방정식(Bio-heat transfer)을 이용하여 지배방정식을 유도하였으며, 유한차분법(Finite Difference Method)을 활용하여 화상에 대한 예측을 수행하는 수치해석 접근법을 사용하였다. 시간에 따른 온도 및 손상함수 결과 분석을 통해 PCM 소재의 열흡수가 열전달을 지연시키는 효과가 큼을 확인할 수 있었고, 그에 의해 화상발생을 방지하는 매우 유효한 방법임을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.333-339
• /
• 2005

The pesticide is raising public interest in the world, because it causes damage to an environmental pollution and the human health remaining agricultural products and an ecosystem, in spite of the advantages. Particularly, each country restricts the residual pesticide and induces observance about the safety and usage standard so that they can control the amount of pesticide used and defend the safety of agricultural products. The habitual practice for the analysis of the residual pesticide depends on GC (gas chromatography), HPLC (high performance liquid chromatography) and GC/MS (gas chromatography/mass spectroscopy), which triturate the fixed quantity of samples, abstract and purify as a suitable organic solvent. These methods have the highly efficient in aspects of sensitivity and accuracy. On the other hand, they need the high cost, time consuming, much effort, expensive equipment and the skillful management. Carbofuran is highly toxic by inhalation and ingestion and moderately toxic by dermal absorption. As with other carbamate compounds, it is metabolized in the liver and eventually excreted in the urine. The half-life of carbofuran on crops is about 4 days when applied to roots, and longer than 4 days if applied to the leaves. This research was conducted to develop immunoassay for detecting carbofuran residue quickly on the basis of surface plasmon resonance and to evaluate the measurement sensitivity. Gold chip used was CM5 spreaded dextran on the surface. An applied antibody to Immunoassay was GST (glutathione-s-transferase). The association and the dissociation time were 176 second and 215 second between GST and carbofuran. The total analysis time using surface plasmon resonance was 13 minutes including regeneration time, on the other hand HPLC and GC/MS was 2 hours usually. The minimum detection limit of a permissible amount for carbofuran in the country is 0.1 ppm. The immunoassay method using surface plasmon resonance was 0.002 ppm.

• 보존과학회지
• /
• 제36권5호
• /
• pp.339-350
• /
• 2020

본 연구는 석조문화재 보존처리용(표면마감) 무기질바인더가 암석에 위해한 영향을 미치는 백화현상을 제어하기 위해 광물기반의 충전제와 발수제를 혼합한 하이브리드 기술을 적용하였다. 연구결과, 무기질바인더 성능개선에 효과적인 충전제(실리카흄 3.4%)와 발수제(실란-실록산 1%)를 선정하였으며, 해당 중량비율은 백화물질 제어에 효과가 있는 것으로 판단된다. 또한 압축강도 기준을(20 MPa) 상회하였고 흡수율은 낮아 투수저항성이 높은 것을 확인하였다. 이온용출 결과도 백화현상에 직·간접적으로 작용하는 이온의 검출량이 대조군보다 작게 검출되어 상대적으로 안정적인 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제12권1호
• /
• pp.39-50
• /
• 2001

Vanadium based solid solution alloys have been studied as a potential negative electrode of Ni/MH battery due to their high hydrogen storage capacity. In order to improve the kinetic property of V-Ti alloy in KOH electrolyte, the ball-milling process with Ni, which has a catalytic effect of hydrogen absorption/desorption, was carried out to modify the surface properties of V-Ti-Cr alloys with high hydrogen storage capacity. Moreover, to overcome the problem of poor cycle life, V-Ti alloy substituted by Cr, V0.68 Ti0.20 Cr0.12, has been developed showing a good cycle performance (keeping about 80 % of initial discharge capacity after 200 cycles). The cycle life of surface-modified V0.68 Ti0.20 Cr0.12 alloy was improved by suppressing the formation of TiO2 layer on the alloy surface while decreasing the amount of dissolved vanadium in the KOH electrolyte. In order to promote the effect of Ni coating on the surface property of V0.68 Ti 0.20 Cr 0.12 alloy by ball-milling, filamentary-typed Ni, which has higher surface coverage area than sphere-typed Ni was used as a surface modifier. Consequently, the surface-modified V0.68 Ti0.20 Cr0.12 alloy electrode showed a improved discharge capacity of 460 mAh/g.

• KSBB Journal
• /
• 제9권5호
• /
• pp.469-474
• /
• 1994

본 연구의 목적은 시판 퍼l녹시계 제초제 2,4-D의 생물학적 처리의 가능성을 평가하기 위한 것이다. 시판 페녹시계 제초제는 2,4-0 아민염 으로셔 2,4-0( 40%)와 용제 (60 % )로 구성 되었다. 2,4-D에서 농화배양에 의해 얻어진 미생물 컨소시염은 탄소원 빛 에너지원으로서 2,4-0를 이용하였다. 이 설험에서 2,4-D분해의 최적 pH 와 기 질농도는 각각 7.0과 54mg/ E 였다. Yeast extract와 ascorbic acid의 첨가는 2,4-0의 분해 와 미생물의 생장을 촉진시켰다. 2,4-0를 정량하기 위해 HPLC가 사용되었으며 그 과정에셔 중간대사물질로셔 2,4-0CP가 분리되었다. GC MS는 2,4-0CP를 입증하기 위하여 사용되였다. 배양중의 UV scans 결과, 2,4-0의 최대흡광치는 배양이 진행되는 동안 감소되었으나, spectral 및 peak 변화는 보여주지 않았다.

• 한국재료학회지
• /
• 제28권5호
• /
• pp.261-267
• /
• 2018

Hydrothermal synthesis of highly crystalline $TiO_2$ nanorods is a well-developed technique and the nanorods have been widely used as the template for growth of various core-shell nanorod structures. Magneli/CdS core-shell nanorod structures are fabricated for the photoelectrochemical cell (PEC) electrode to achieve enhanced carrier transport along the metallic magneli phase nanorod template. However, the long and thin $TiO_2$ nanorods may form a high resistance path to the electrons transferred from the CdS layer. $TiO_2$ nanorods synthesized are reduced to magneli phases, $TixO_{2x-1}$, by heat treatment in a hydrogen environment. Two types of magneli phase nanorods of $Ti_4O_7$ and $Ti_3O_5$ are synthesized. Structural morphology and X-ray diffraction analyses are carried out. CdS nano-films are deposited on the magneli nanorods for the main light absorption layer to form a photoanode, and the PEC performance is measured under simulated sunlight irradiation and compared with the conventional $TiO_2/CdS$ core-shell nanorod electrode. A higher photocurrent is observed from the stand-alone $Ti_3O_5/CdS$ core-shell nanorod structure in which the nanorods are grown on both sides of the seed layer.