• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2012

In this study, we investigated the effect of groove pattern and gap-fill with lossy materials at 15 GHz frequency of Ku-band. We used Epoxy/MWCNT composite materials as gap-fill materials. Although epoxy does not have an absorbance capability, epoxy added conductive fillers, which are multi-walled carbon nanotubes (MWCNT), can function as radar absorbing material. Specimens were fabricated with different MWCNT mass fractions (0, 0.5, 1.0, 2.0 wt%) and their permittivity in the Ku-band was measured using the waveguide technique. We investigated the effect of gap-fill on monostatic RCS by calculating RCS with and without gap-fill. For arbitrarily chosen thickness and experimentally obtained relative permittivity, we chose the relative permittivity of MWCNT at 2 wt% (${\varepsilon}_r$=8.8-j2.4), which was the lowest reflection coefficient for given thickness of 3.3 mm at V-pol. and $80^{\circ}$ incident angle. We also checked the monostatic RCS and the field intensity inside the groove channel. In the case of H-pol, gap-fill was not affected by the monostatic RCS and magnitude was similar with or without gap-fill. However, in the case of V-pol, gap-fill effectively reduced the monostatic RCS. The field intensity inside the groove channel reveals that different RCS behaviors depend on the wave polarizations.

• Korean Journal of Pharmacognosy
• /
• v.22 no.3
• /
• pp.171-182
• /
• 1991

Several experiments were carried for the purpose of establishing the basis for the quality evaluation of deer horn. Deer horn originated from China, New Zealand, Soviet and Alaska were used as objectives and some constituents involved in deer horn were assayed and compared with one another. Five kinds of trace elements including Ca and Fe were determined by atomic absorbance spectroscopy. The more the region came down from the top of the deer horn, the more the ratio of Ca to Fe content (Ca/Fe) was increased. The same increasing tendancy was observed in the case of ash content. Gangliosides were isolated from deer horn by alumina column chromatography and identified by TLC using gangliosides Type II obtained from bovine brain as the standard material. The TLC chromatograms were scanned by dual wavelength TLC scanner, then those TLC profiles were compared. Deer horn from China and New Zealand were analogous but those from Soviet and Alaska were each distinguished in their TLC profiles.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.377-388
• /
• 1985

The changes in protein fractions and its gel electrophoretic pattern of rapeseeds (Brassica napus L) were investigated during germination at $25^{\circ}C$ under dark condition. The major protein fraction was found to be albumin 25.0%) and globulin (24.6%). Both fractions were decreased throughout germination, particularly significant for albumin, while prolamine(2.2%) and glutelin (1.8%) showed an initial decrease followed by a slow increase at the later stage of germination. The initial 5-6 peaks of gel electrophoresis were reduced to a few after 45 hours. The absorption spectrum at the range of 400-700 nm showed a significant increase in absorbance for sodium hexametaphosphate (SHMP) extract of rapeseeds. The protein extractability with SHMP was not significantly affected by germination.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.10
• /
• pp.1680-1686
• /
• 2015

Inhibition of 4-nitroquinoline-1-oxide (4-NQO) genotoxicity by a probiotic strain of Lactobacillus rhamnosus (IMC501) was assessed by the prokaryotic short-term bioassay SOSChromotest, using Escherichia coli PQ37 as the target organism. Results showed the ability of strain IMC501 to rapidly and markedly counteract, in vitro, the DNA damage originated by the considered genotoxin. The inhibition was associated with a spectroscopic hypsochromic shift of the original 4-NQO profile and progressive absorbance increase of a new peak. IR-Raman and GC-MS analyses confirmed the disappearance of 4-NQO after contact with the microorganism, showing also the absence of any genotoxic molecule potentially available for metabolic activation (i.e., 4-hydroxyaminoquinoline-1-oxide and 4-nitrosoquinoline-1-oxide). Furthermore, we have shown the presence of the phenyl-quinoline and its isomers as major non-genotoxic conversion products, which led to the hypothesis of a possible pattern of molecular transformation. These findings increase knowledge on lactobacilli physiology and contribute to the further consideration of antigenotoxicity as a nonconventional functional property of particular probiotic strains.

• Journal of Environmental Science International
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2006

The purpose of this study is to illustrate the characteristics of soil organic matter (SOM) and partition coefficient $(K_{DOC})$. Humic substances (HS) from eight soils of varying properties were extracted by two different methods. The dissolved organic carbon (DOC) concentration was stabilized in 22hrs. The ratio of UV absorbance at 465nm and 665nm (E4/E6 ratio) for HS were similar pattern for 8 soils. The extraction with increasing pH increased dissolution of SON. The ratio of organic carbon (OC) associated with HA and FA (the HA:FA ratio) was varied widely in accordance with the soils and was highly correlated to OC $content(\%)$ of the soils. in modeling metal speciation in soils and soil solutions, assumptions that all DOC in soil solution is associated with FA and that HA:FA ratio in SOM is constant have been made. The results of this study indicate that the validity of these assumptions is questionable. By sequential pH extraction, the $K_{DOC}$ showed in a linear correlation with pH.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.3-6
• /
• 2009

Aluminum nitride (AIN) thin films were deposited on a polycrystalline 3C-SiC intermediate layer by a pulsed reactive magnetron sputtering system. Characteristics of the AIN/SiC heterostructures were investigated by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The columnar structure of AIN thin films was observed by FE-SEM. The surface roughness of AlN films on the 3C-SiC buffer layer was measured using AFM. The XRD pattern of AlN films on SiC buffer layers was highly oriented at (002). Full width at half maximum (FWHM) of the rocking curve near (002) reflections was $1.3^{\circ}$. The infrared absorbance spectrum indicated that the residual stress of AIN thin films grown on SiC buffer layers was nearly negligible. The 3C-SiC intermediate layers are promising for the realization of nitride based electronic and mechanical devices.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.462-466
• /
• 2007

Aluminum nitride (AlN) thin films were deposited on Si substrates by using polycrystalline (poly) 3C-SiC buffer layers, in which the AlN film was grown by pulsed reactive magnetron sputtering. Characteristics of grown AlN films were investigated experimentally by means of FE-SEM, X-ray diffraction, and FT-IR, respectively. The columnar structure of AlN thin films was observed by FE-SEM. X-ray diffraction pattern proved that the grown AlN film on 3C-SiC layers had highly (002) orientation with low value of FWHM (${\Theta}=1.3^{\circ}$) in the rocking curve around (002) reflections. These results were shown that almost free residual stress existed in the grown AlN film on 3C-SiC buffer layers from the infrared absorbance spectrum. Therefore, the presented results showed that AlN thin films grown on 3C-SiC buffer layers can be used for various piezoelectric fields and M/NEMS applications.

• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.256-263
• /
• 1985

In order to investigate the inferior factor of red ginseng quality, the contents of various chemical components, physico-chemical properties and arrangement state of ginseng cells were observed. Contents of total reducing sugar, reducing sugar, crude protein, crude fibre and specific gravity of inside white part of red ginseng were less than those of normal part. But differences in content of crude saponin, HPLC pattern of ginsenosides and reducing ability for DP P H(1,1-dipheny 1-2-picrylhydrazyl) between normal and inside white part of red ginseng were not found. The optical density of 1 water extract of normal part of red ginseng did not differ from that of inside white 1 part of red ginseng, but the visible and UV absorbance of acid hydrolyzate of normal red ginseng showed higher than those of inside white part of red ginseng. The differences in the internal color and tissue of normal and inside white part of red ginseng were easily found with naked eye, and by the microscopic fractography, the orangement state of ginseng cell in the inside white part of red ginseng was less dense than that in normal red ginseng.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.544-544
• /
• 2003

We investigated the inhibitory effect of whitening materials with growth factor or alone on melanomas derived from Human (B-16) and mouse (SK-MEL-31) using melanin content. Melanin content was determined by the absorbance value at 470nm per cells. we used the growth factors known as activators of Adenylate cyclase, Protein kinase C and tyrosine kinase pathway separately. In addition, we compared the action of UV-induced with non-biological growth factor with whitening materials in melanomas derived from Human and mouse. The results showed that the aspect of inhibitory effect of whitening materials on B16 and SK-MEL-31 was not different. And, the action of each growth factor involved in the differentiation and proliferation of melanoma on the inhibition of melanogenesis in B-16 and SK-MEL-31 using whitening agents showed no difference. Also, The action of UV -induced and non-biological growth factors didn't exhibit different pattern on the effect of whitening agent in B-16 and SK-MEL-31.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.419-429
• /
• 2023

Ultraviolet C (UV-C, 200-280 nm) light has germicidal properties that inactivate a wide range of pathogenic and spoilage microorganisms. UV-C has been extensively studied as an alternative to thermal decontamination of fruit juices. Recent studies suggest that the efficacy of UV-C irradiation in reducing microorganisms in fruit juices is greatly dependent on the characteristics of the target microorganisms, juice matrices, and parameters of the UV-C treatment procedure, such as equipment and processing. Based on evidence from recent studies, this review describes how the characteristics of target microorganisms (e.g., type of microorganism/strain, acid adaptation, physiological states, single/composite inoculum, spore, etc.) and fruit juice matrices (e.g., UV absorbance, UV transmittance, turbidity, soluble solid content, pH, color, etc.) affect the efficacy of UV-C. We also discuss the influences on UV-C treatment efficacy of parameters, including UV-C light source, reactor conditions (e.g., continuous/batch, size, thickness, volume, diameter, outer case, configuration/arrangement), pumping/flow system conditions (e.g., sample flow rate and pattern, sample residence time, number of cycles), homogenization conditions (e.g., continuous flow/recirculation, stirring, mixing), and cleaning capability of the reactor. The collective facts indicate the immense potential of UV-C irradiation in the fruit juice industry. Existing drawbacks need to be addressed in future studies before the technique is applicable at the industrial scale.