• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.5-8
• /
• 2013

The ignition of aluminum particles under high pressure and temperature conditions is studied. The laser ablation method is used to generate aluminum particles exposed to pressures ranging between 0.35 and 2.2 GPa. A continuous wave $CO_2$ laser is then used to heat surface of the aluminum target until ignition is achieved. We confirm ignition by a spectroscopic analysis of AlO vibronic band of 484 nm wavelength. The radiant temperature is measured with respect to various pressures for tracing of required heating energy for ignition. Then the ignition temperature is deduced from the radiant temperature using the thermal diffusion equation. The established ignition criteria for corresponding temperature and pressure can be used in the modeling of detonation behavior of heavily aluminized high explosives or solid propellants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.278-281
• /
• 1999

PLZT thin films on Pt/Ti/SiO$_2$/Si substrate were fabricated with different Thickness by pulsed laser deposition. 14/50/50 PLZT thin film showed a maximum dielectric constant value of $\varepsilon$$_{t}$=985 at 5000$\AA$, and $\varepsilon$$_{t}$=668 at 2000A. P-EI hysteresis loop of 14/50/50 PLZT thin film was slim ferroelectric. Leakage current density of 14/50/70 PLZT thin film was 10$^{-8}$ A/$\textrm{cm}^2$ at 2000$\AA$.EX>.

• 한국레이저가공학회지
• /
• 제8권2호
• /
• pp.7-12
• /
• 2005

The material processing of UV nanosecond pulse laser cannot be avoided the material shape change and contamination caused by interaction of base material and laser beam. Nowadays, ultra short pulse laser shorter than nanosecond pulse duration is used to overcome this problem. The advantages of this laser are no heat transfer, no splashing material, no left material to the adjacent material. Because of these characteristics, it is so suitable for micro material processing. The processing of sapphire wafer was done by UV 355nm, green 532nm, IR 1064nm. X-Y motorized stage is installed to investigate the proper laser beam irradiation speed and cycles. Also, laser beam fluence and peak power are calculated.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.98-104
• /
• 2007

The carbon fiber reinforced carbon composite (CFRC) materials are necessary for the advanced industries that require the thermal resistance. And the development and research for CFRC has been in progress in the field of aerospace and defense industry. CFRC have several advantages and special properties such as excellent anti ablation, outstanding strength retention at very high temperature, high heat capacity and thermal transport, high specific stiffness and strength, and high thermal shock resistance. They have been used as aircraft brake, rocket nozzle, nose cones, jet engine turbine wheels, and high speed craft. Since the technology related to CFRC was prohibited from importing and exporting, we developed our own technology to produce F-16 B32 brake disk made out of CFRC, and then we performed various tests to observe the characteristics of CFRC-based brake disk developed in this study in view of density, strength, friction, specific heat, and heat conductivity.

• 한국추진공학회지
• /
• 제7권4호
• /
• pp.39-45
• /
• 2003

본 연구에서는 제트 베인의 선단부 형상과 종횡비에 따라 다르게 나타나는 공기 역학적 특성을 분석하였으며, 고속 고온의 가스에 의해 발생하는 제트 베인의 삭마형태에 따른 공기역학적 성능 감소를 분석하였다. 이 연구를 위해 압축 공기를 이용한 초음속 유동 시험 장치를 제작하여 마하수 2.88, 과소 팽창비 2인 유동을 모사하고, 제트 베인의 선단부 형상과 종횡비에 따른 공기역학적 특성 분석을 위해 형상이 다른 18종의 제트 베인을 제작하였으며, 또한 삭마율에 따른 공기 역학적 성능 감소를 분석하기 위해 원형과 원형 제트 베인의 10%, 20% 삭마된 베인을 제작하여, 제트 베인의 편향각을 0도에서 25도까지 5도 간격으로 변화시켜가며 양력과 항력을 측정하여 삭마와 관련한 공기역학적 성능을 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.100-100
• /
• 2000

Aluminium oxide (Al2O3) films have been investigated for many applications such as insulating materials, hard coatings, and diffusion barriers due to their attractive electrical and mechanical properties. In recent years, application of Al2O3 films for dielectric materials in integrated circuits as gates and capacitors has attracted much attention. Various deposition techniques such as sol-gel, metalorganic decomposition (MOD), sputtering, evaporation, metalorganic chemical vapor deposition (MOCVD), and pulsed laser ablation have been used to fabricate Al2O3 thin films. Among these techniques, reactive sputtering has been widely used due to its high deposition rate and easy control of film composition. It has been also reported that the sputtered Al2O3 films exhibit superior chemical stability and mechanical strength compared to the films fabricated by other processes. In this study, Al2O3 thin films were deposited on Pt/Ti/SiO/Si2 and Si substrates by DC reactive sputtering at room temperature with variation of the Ar/O2 ratio in sputtering ambient. Crystalline phase of the reactively sputtered films was characterized using X-ray diffractometry and the surface morphology of the films was observed with Scanning election microscopy. Effects of Th Ar/O2 ratio characteristics of Al2O3 films were investigated with emphasis on the thickness dependence of the dielectric properties. Correlation between the dielectric properties and the microstructure was also studied

• 한국재료학회지
• /
• 제10권12호
• /
• pp.807-811
• /
• 2000

MFISFET (Metal-ferroelectric-nsulator-semiconductor-field effect transistor)에의 적용을 위해 CeO$_2$와 SrBi$_2$Ta$_2$O$_{9}$ 박막을 각각 r.f. sputtering 및 pulsed laser ablation법으로 제조하였다. CeO$_2$ 박막은 증착시 스퍼터링개스비 (Ar:O$_2$)에 따른 특성을 고찰하였다. Si(100) 기판 위에 $700^{\circ}C$에서 증착된 CeO$_2$ 박막들은 (200)방향으로 우선방향성을 가지고 성장하였고 $O_2$ 개스량이 증가함에 따라 박막의 우선방향성, 결정립도 및 표면거칠기는 감소하였다. C-V특성에서는 Ar:O$_2$가 1 : 1인 조건에서 제조된 박막이 가장 양호한 특성을 보였다. 제조된 박막들의 누설전류값은 100kV/cm의 전계에서 $10^{-7}$ ~$10^{-8}$ A의 차수를 보였다. CeO$_2$/Si 기판위에 성장된 SBT는 다결정질상의 치밀한 구조를 가지고 성장을 하였다 80$0^{\circ}C$에서 열처리된 SBT박막으로 구성된 MFIS구조의 C-V 특성에서 memory window 폭은 0.9V를 보였으며 5V에서 4$\times$$10^{-7}$ A/$\textrm{cm}^2$의 누설전류밀도를 보였다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.104-110
• /
• 2015

LED has added value as a lighting source in the illuminating industry because of its high efficiency and low power consumption. In LED production processes, the chip cutting process, which mainly uses a scribing process with a laser has an effect on quality and productivity of LED. This scribing process causes problems like heat deformation, decreasing strength. The inner laser method, which makes a void in wafer and induces self-cracking, can overcome these problems. In this paper, cutting sapphire wafer for fabricating LED chip using the inner laser scribing process is proposed and evaluated. The aim is to settle basic experiment conditions, determine parameters of cutting, and analyze the characteristics of cutting by means of experimentation.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.46-52
• /
• 2008

The restrictor, which is a fluid channel from a reservoir to a chamber inside a thermal micro actuator, has been fabricated using ArF and KrF excimer lasers, Diode-Pumped Solid State Lasers (DPSSL) and femtosecond lasers for a feasibility study. A numerical model of fluid dynamics for the actuator chamber and restrictor is presented. The model includes bubble formation and growth, droplet ejection through nozzle, and dynamics of fluid refill through the restrictor from a reservoir. Since an optimized and well-fabricated restrictor is important for a high frequency actuator, some special beam delivery setups and post processing techniques have been researched and developed. The effects of variations of the restrictor length, diameter, and tapered shapes are simulated and the results are analyzed to determine the optimal design. The numerical results of droplet velocity and volume are compared with the experimental results of a cylindrical-shaped actuator. It is found that the micro actuators having tapered restrictors show better high frequency characteristics than those having a cylindrical shape without any notable decrease of droplet volume. The laser-fabricated restrictors demonstrate initial feasibility for the laser direct ablation technique although more development is required.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.151-158
• /
• 2007

Filtration studies, using simulated test nanoparticles or diesel nanoparticles, have been performed about Inconel foam filters for DPF combined with electrostatic precipitation. The simulated test particles were synthesized by laser ablation in the nitrogen atmosphere at the standard condition. The diesel particles were exhausted from the diesel engine driven on the condition of idle or load mode. Filtration efficiency of the metal foam filter is very low because most of particles are penetrated through the large pores of filter. However, the efficiency was considerably improved by applying the electric field to the filter and/or charging the nanoparticles. Nevertheless, the pressure drop of filter hardly increased because the filter-pores were not clogged by deposited particles and kept open.