• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1246-1264
• /
• 2000

An input-output buffering switch operates in either of tow different cell loss modes; Backpressure mode and Queueloss mode. In the previous studies, the Backpressrue mode is more effective at low traffic loads, and the Queueloss mode performs better at high traffic. We propose a new operation mode, called Hybrid mode, which adopts the advantages of he Backpressure and the Queueloss mode. Backpressure and Queueloss modes are distinguished from whether a cell loss occurs at the output buffer or not when output buffer overflows, irrespective of input buffer status. In order to simply combine Backpressure and Queueloss mode, the change of input traffic load must be measured. However, in the Hybrid mode, simply both of the input and output buffer overflow and checked out to determine the cell discard. The performance of the Hybrid mode is compared with those of the Backpressure and the Queueloss mode under random and bursty traffic. This paper show that the Hybrid mode always gives the best performance results for most ranges of load values.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.189-200
• /
• 1999

For admitting a hard real-time connection to an ATM network, it is required that the end-새둥 delays of cells belong-ing to the connection meet their deadlines without violating the guarantees already provided to the currently active connections. There are two kinds of methods to analyze the end-to-end delay in an ATM network. A decomposed method analyzes the worst case delay for each switch and then computes the total delay as the sum of the delays at individual switches. On the other hand, an integrated method analyzes all the switches involved in an inte-grated manner and derives the total delay directly. In this paper, we present an efficient and effecitive integrated method to compute the end-to-end delay. We evaluate the network performance under different system parameters and we compare the performance of the proposed method with the conventional decomposed and other integrated methods [1], [3], [5]-[9].

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.417-424
• /
• 2001

Internet networks consisting of existing routers show the limits in efficiency of traffic managements. In order to overcome the limits, MPLS System is high speed switching technology and is not based on IP address but based on label was designed. However MPLS system being based on ATM has the difficulties of supporting Qos(Quality of Service). This paper suggested the way to consist a service-assured-network using CR-LDP protocol which was designed for guaranteeing QoS in MPLS system being based on ATM switch and using qGSMP protocol, and the way to implicitly establish LSP by implementing QoS Translation and QoS Mapping in LER System.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2587-2596
• /
• 2000

본 논문은 ATM-Forum의 WATM 기반 제3세대 무선 멀티미디어 망 환경에서 하나의 M.E.SW(Mobility Enabled ATM Switch)가 단순화된 많은 AP들을 관리하는 방안에 대하여 고려하였다. 또한 WATM 망 환경에서 가변 그룹 크기와 동적인 그룹 페이징 순서 방법을 사용하는 효율적인 페이징 방안을 제안하였다. 그리고 제안한 방안과 기존의 방안에 대해 성능을 평가 및 분석하였다. 여기서는 blanket-polling, sequential-polling 그리고 고정크기 그룹화 방안과 같은 대부분의 기존 방안들을 제안한 가변적이면서 동적인 그룹화 방안과 비교 분석하였다. 분석결과 offered-load가 낮은 환경에서는 단순한 blanket-polling paging 방안이 약간 더 우수한 성능을 보였다. 그러나 트래픽 밀도가 높아지면서 제안한 방안이 기존의 방안들 보다 더 우수한 성능을 보였다. 성능개선은 주로 가변적인 그룹 크기와 MS(Mobile Station)기반 동적인 페이징 순서 방안에 기인한다. 또한 제안한 방안은 MS에 대한 아주 간단한 이력정보와 최종적으로 통신한 AP 정보만이 필요하다. 따라서 이 방안은 효율적으로 구현하는 것이 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2836-2849
• /
• 1996

Over ATM network, variable bit rate(or VBR) traffic is allowed. Control of VBR traffic is allowed. Control of VBR traffic becomes difficult if it is bursty. VBR video traffic becomes so much bursty during intra frame period that much cell loss would occur when satistical multiplexed in ATM swich. To aviod cellloss, extra communication resources should be allocated, which reduces the capability of an ATM channel. In this paper, we propose two methods which enable a channel limited in resources to serve more VBR MPEG video bit streams. Firstly, we could redue the bitrate fluction of a statiscally multiplexed bundle of VBR video bit streams by reducing the number of intra frames overlapped at the same frame period. This method can be used in ATM switch which controls multiple video sources. Secondary, in two layer enoding, statistical multiplexing gains can be icreased by letting peak bit rate durations of both layers not be overlapped. This results in more smooth traffic. The performance of proposed methods are demonstrated by a proposed calculation method of statistical multiplexing gains(or SMGs.) The proposed SMG is based on both delay and cell loss QoS requirements at the same time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1597-1602
• /
• 1999

An analog / digital mixed mode frequency multiplication and distribution ASIC for switch link or network synchronization of ATM switching system for B-ISDN has designed. This ASIC generates 234-7 MHz system clock and 77.76 MHz, 19.44 MHz user clocks using 46.94 MHz external clock. It also includes digital circuits for checking and selecting between the two external clocks. For effective ASIC design, full custom technique is used in analog PLL circuit and standard cell based technique is used in digital circuit. Resistors and capacitors are specially designed so the chip can be implemented in 0.8$\mu\textrm{m}$ digital CMOS technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.313-322
• /
• 2000

The ATM Forum has been focusing on flow control mechanism for ABR traffic management. The goal of this activity is to efficiently manage the leftover network bandwidth and fairly distribute it among contending ABR VC so that communication links can be optimally utilized. ABR traffic is difficult to predict traffic shape because it has bursts and variable behavior. Also it's sensitive to lose but not to delay. This behavior makes difficult to UPC function in network and cause of congestion in switch, thus performance is degraded. To resolve this problem, various flow control mechanism has been worked in the ATM Forum. Especially, the rate-based flow control mechanism for ABR traffic has been standardized in the ATM Forum, Sept. 1994. Thus, various flow control mechanism has been working which likes EFCI, ER, VS/VD. VS/VD control is superior than existed ER control because it isolate different networks from each other. In this paper, we propose an expanded VS/VD flow control algorithm and compare with existed VS/VD flow control algorithm. Simulation result shows that this algorithm improve a problem in aspect of delay and fairness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1184-1195
• /
• 1998

In this paper, we compare vaious input-buffered ATM switch architectures in structures on input buffer and switching fabric, the resons for performance improvement and degradation, arbitration scheme and maximum throughput, and present comparative merits and demerits of each architecture under random and bursty traffic. We also analyze the prformance of combined architectures of windowing scheme, destination-queueing based input-port expansion schemeand output-port expansion scheme, and show that it is possible to achieve 100% throughput with combined scheme of destination-queueing based input-port expansion scheme and output-port expansio scheme when the number of output group is 2 and output port expansion ratio is 2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.855-869
• /
• 1997

In this paper, we proposed two kids of dynamic priority control mechanisms controlling the cell service ratio in order to improve the QOS(Quality of Service). We also analyse theoretically the characteristics of cell loss probability and mean cell delay time by applying the proposed priority control mechanisms to ATM switch with output buffer. The proposed priority control mechanisms have the same principles of storing cells into buffer but the different principles of serving cells from buffer. The one is the control mechanism controlling the cell service ratio according to the relative cell occupancy ratio of buffer, the other is the control mechanism controlling the cell service ratio according to both the relative cell occupancy ratio of buffer and the average arrival rate. The two service classes of our concern are the delay sensitive class and the loss sensitive class. The analytical results show that the proposed control mechanisms are able to improve the QOS, the characteristics of cell loss probability and mean cell delay time, by selecting properly the relative cell occupancy ratio of buffer and the average arrival rate. conventional DLB algorithm does not support synchronous cells, but the proposed algorithm gives higher priority to synchronous cells. To reduce synchronous cell loss rate, the synchronous cell detector is used in the proposed algorithm. Synchronous cell detector detects synchronous cells, and passes them cells to the 2nd Leaky-Bucket. So it is similar to give higher priority to synchronous cells. In this paper, the proposed algorithm used audio/video traffic modeled by On/Off and Two-state MMPP, and simulated by SLAM II package. As simulation results, the proposed algorithm gets lower synchronous cell loss rate than the conventional DLB algorithms. The improved DLB algorithm for multimedia synchronization can be extended to any other cells which require higher priority.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.73-89
• /
• 2009

This research examines the factors that influence a consumer's decision to switch to new self-service technologies. The model related to attitudes, anticipated outcomes and intentions to change a behavior was assessed using structural equation modeling at the context of a banking industry. The results revealed that 1) an attitude toward a staff, Internet banking, and an ATM would influence an attitude toward a bank, 2) an attitude toward Internet banking and ATM influence utility and enjoyment, and an attitude toward Internet banking and staff affect social acceptance, 3) an attitude toward a bank was positively associated with enjoyment, 4) an attitude toward Internet banking had a positive effect on the intention, but an attitude toward an ATM had a negative one, and 5) both anticipated outcomes, enjoyment and social acceptance, were found to influence an intention to change behavior, but utility was found to affect negatively.