• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.395-403
• /
• 2008

In this paper, we present the analysis of the fact that normalization and types of citation fields have an effect to the citation matching. Citation matching indicates the series of grouping process for the citation records referring to the same paper. The citation matching combines the comparison results of citation fields, and determines which citation records are the same. For the citation field comparison in the citation matching phase, studies on the normalization and types of citation fields are needed. But they are relatively insufficient when compared with the studies on citation matching methods. In this research, we showed that the citation matching performance was affected by the normalization and types of citation fields. Additionally, we also analyzed the combination of normalized multiple fields. According to the experimental result, the citation field had the overall performance improvement through a normalization, and the performance mode differently showed up at the citation field type.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.386-396
• /
• 2002

This paper presents a neural network-based near-optimal routing algorithm. It employs a modified Hopfield Neural Network (MHNN) as a means to solve the shortest path problem. It uses every piece of information that is available at the peripheral neurons in addition to the highly correlated information that is available at the local neuron. Consequently, every neuron converges speedily and optimally to a stable state. The convergence is faster than what is usually found in algorithms that employ conventional Hopfield neural networks. Computer simulations support the indicated claims. The results are relatively independent of network topology for almost all source-destination pairs, which nay be useful for implementing the routing algorithms appropriate to multi -hop packet radio networks with time-varying network topology.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.33-41
• /
• 2014

Heliostat field in a tower type solar thermal power plant is the sun tracking mirror system which affects the overall efficiency of solar thermal power plant most significantly while consumes a large amount of energy to operate it. Thus optimal operation of it is very crucial for maximizing the energy collection and, at the same time, for minimizing the operating cost. Heliostat field operational algorithm is the logics to control the heliostat field efficiently so as to optimize the heliostat field optical efficiency and to protect the system from damage as well as to reduce the energy consumption required to operate the field. This work presents the heliostat field operational algorithm developed for the heliostat field of 200kW solar thermal power plant built in Daegu, Korea. We first review the structure of heliostat field control system proposed in the previous work to provide the conceptual framework of how the algorithm developed in this work could be implemented. Then the methodologies to operate the heliostat field properly and efficiently, by defining and explaining the various operation modes, are discussed. A simulation, showing the heat flux distribution collected by the heliostat field at the receiver, is used to show the usefulness of proposed heliostat field operational algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.233-240
• /
• 2011

A field server was developed by using ubiquitous sensor network technology to monitor the abrupt weather variation in local or mountain area. The data transmissions between deployed field servers in local terrain are very important technology in disaster prevention monitoring system. Weather related information such as temperature, humidity, illumination, atmospheric pressure, dew point and meteorological data are collected from the designated field at a regular interval. The received information from the multiple sensors located at the sensor field is used flooding routing protocol transmission techniques and the sensing data is transferred to gateway through multi-hop method. Telosb sensor node are programmed by nesC language in TinyOS platform to monitor the weather parameters of the local terrain.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.221-237
• /
• 2005

This paper presents and analyzes field test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. In the field test, according to EDOCR On/Off, types of antennas and receivers we measured reception possibility, C/N(Carrier to Noise Ratio), reception power, noise and input margin at each test point. By the field test results, the reception rate of the receiver manufactured in 2004 was $33\%$ when EDOCR is off and directional antenna is used. However, the reception rate was $100\%$ when EDOCR is on. In addition, the noise margin, which determines reception quality was increased at least 6 dB, so that it is capable of constructing SFN(Single Frequency Network) using the EDOCR.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.193-201
• /
• 2008

Using Network Coding in P2P systems yields great benefits, e.g., reduced download delay. The core notion of Network Coding is to allow encoding and decoding at intermediate nodes, which are prohibited in the traditional networking. However, improper implementation of Network Coding may reduce the overall performance of P2P systems. Network Coding cannot work with general arithmetic operations, since its arithmetic is over a Finite Field and the use of an efficient Finite Field arithmetic algorithm is the key to the performance of Network Coding. Also there are other important performance parameters in Network Coding such as Field size. In this paper we study how those factors influence the performance of Network Coding based systems. A set of experiments shows that overall performance of Network Coding can vary 2-5 times by those factors and we argue that when developing a network system using Network Coding those performance parameters must be carefully chosen.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.52-59
• /
• 2007

A field mill capable of measuring the magnitude and polarity of electric fields at the ground level was studied to apply to a lightning warning system as a sensor. We designed and fabricated a planar-shutter type field mill with a rotating-vanes. A calibration of the field mill was performed in a vertically symmetrical arrangement which consists of two equal size parallel round plates to form a homogeneous electrical fields. The sensitivity of the field mill was adjusted at 0.5[V/kV/m], and this covers a ranges from 200[V/m] to 20[kV/m]. After the calibration experiment, the field mill was installed on the roof of a building to measure the changes of electric field intensity caused by thunderclouds. During the period from July 1. 2006 to July 15. 2006, the electric field intensity was recorded a ranges of $+2[kV/m]{\sim}-6[kV/m]$ depending on generation, extinction and movement of thunderclouds. From the actual test on the ground it is confirmed that the field mill has a good performance necessary for the measurement of DC electric fields.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

We developed a new PDP gray scale implementation method on the basis of the quantized memory addressing(QMA) principle. We defined three wall charge states; 'fully-on', 'off', and 'half-on', by controlling the width of address pulses. With these three wall charge state, we were able to express 255 level gray scale with only 7 sub-fields. Furthermore, in contrast to the conventional driving methods, the sub-field combinations for any two adjacent gray levels differ by only 1 sub-field, at worst, and therefore, eliminate the dynamic false contours. Since this method use 7 sub-field, the sustain discharge Period is increased by more than $70\%$ compared to the 12 sub-field method which reduces the dynamic false contours.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.140-158
• /
• 2000

Testing of terrestrial Digital TV(DTV) broadcasting in Seoul and Kyung-gi region was started in May 1999. Tasks of the committee for DTV technical evaluation were to implement test procedures for DTV transmitting systems, to analyze various technical aspects of DTV and to complete a field test. This paper summarizes the field test results. The field test vehicle was designed and constructed to measure field data. We chose over 200 test points to verify the receiving status of DTV signals and compared them with the analog TV signals at the same site. The results showed stable and satisfactory reception of DTV signals over 70%. The system performance index was over 80%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.136-142
• /
• 2001

In this paper, a method of canceling and suppressing differential mode crosstalk noise signals caused by non-uniform coupling between two transmission lines in UTP (unshielded twisted pair) modular jacks is discussed. Differential mode crosstalk noise signals in balanced transmission lines with UTP modular jacks were suppressed, by applying field cancellation techniques to this modular jack. To verify an effectiveness of the field cancellation techniques, 8 pin modular jacks were made, and the NEXT (Near End Crosstalk) losses were measured to prove its applicability by the network analyzer(HP8720C) at 100 Mb/s.