• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.65-66
• /
• 2022

AR을 기반으로 하는 현실과 가상세계가 공존하는 콘텐츠들이 증가하고 있다. 이에 따라 AR 콘텐츠에 대한 체계적인 테스팅에 대한 필요성도 증가하고 있다. 소프트웨어 테스팅과 관련한 품질특성은 ISO/IEC 25010에서 정의하고 있다. 기존의 연구에서 ISO/IEC 25010을 기반으로 AR의 테스팅에 적용할 수 있는 품질특성을 제안하였다. 본 논문에서는 기존의 연구에서 제안한 AR 테스팅 품질특성에 신뢰성과 보안성을 보완할 것을 제안한다. 이러한 품질특성으로 고려하여 AR의 테스팅에 필요한 테스트 케이스를 개발하고 실행한다면 보다 체계적인 테스팅이 가능할 것이다.

• Composites Research
• /
• v.20 no.6
• /
• pp.28-33
• /
• 2007

The puncture properties of short-fiber reinforced rubber were investigated as functions of fiber aspect ratio(AR: length of fiber/diameter of fiber), fiber content, specimen size and testing velocity. The puncture stresses of the matrix and short-fiber reinforced rubber decreased with specimen size, and increased with testing velocity at same specimen size. As the fiber AR increased the puncture stress at given fiber content also increased. The problem of the specimen shape was investigated by the comparison of the tensile strength with puncture stress. The forces acting in the membrane wall of the matrix and the short-fiber reinforced rubber showed a similar data regardless of specimen size. And those increased with testing velocity at same specimen size. As the fiber AR increased the force acting in the wall at given fiber content also increased. Overall, it was found that the specimen size, testing velocity had an important effects on the puncture properties.

• Journal of the Korean Statistical Society
• /
• v.27 no.2
• /
• pp.165-187
• /
• 1998

Shin and Sarkar (1993, 1994) studied the problem of testing for a unit root in an AR(p) signal observed with MA(q) noise when the MA parameters are known. In this paper we consider the case when the MA parameters are unknown and to be estimated. Test statistics are defined using unit root parameter estimates based on three different estimation methods of Hannan and Rissanen (1982), Kohn (1979) and Shin and Sarkar (1995). An AR(p) process contaminated by MA(q) noise is a .estricted ARMA model, for which Shin and Sarkar (1995) derived an easy-to-compute Newton- Raphson estimator The two-stage estimation p.ocedu.e of Hannan and Rissanen (1982) is used to compute initial parameter estimates in implementing the iterative estimation methods of both Shin and Sarkar (1995) and Kohn (1979). In a simulation study we compare the relative performance of these unit root tests with respect to both size and power for p=q=1.

• The Korean Journal of Applied Statistics
• /
• v.16 no.1
• /
• pp.141-150
• /
• 2003

This paper presents the multiple testing method of an autoregressive parameter in stationary AR(1) model using the usual Bayes factor. As prior distributions of parameters in each model, uniform prior and noninformative improper priors are assumed. Posterior probabilities through the usual Bayes factors are used for the model selection. Finally, to check whether these theoretical results are correct, simulated data and real data are analyzed.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.100-107
• /
• 1999

In this paper, we deal with the speckle noise reduction and parameter estimation of ultrasonic NDT(non-destructive test) signals obtained during weld inspection of piping. The overall approach consists of three major steps, namely, speckle noise analysis, proposition of wavelet domain AR(autoregressive) model and flaw detection by proposed model parameter. The data are first processed whereby signals obtained using vertical and angle beam transducer. Correlation properties of speckle noise are then analyzed using multiresolution analysis in wavelet domain. The parameter estimation curve obtained using the proposed model is classified a flaw in weld region where is contaminated by severe speckle noise and also clear flaw signal is obtained through CA-CFAR threshold estimator that is a nonlinear post-processing method for removing the noise from reconstructed ultrasonic signal.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.9
• /
• pp.1470-1477
• /
• 2019

${\beta}_2$-adrenergic receptor (${\beta}_2-AR$) was expressed efficiently using Bac-to-Bac Baculovirus Expression System in Sf9 cells as a bio-recognition element for multianalyte screening of ${\beta}$-agonist residues in pork. Sf9 cells were selected as the expression system, and codon optimization of wild-type nucleic acid sequence and time-dependent screening of expression conditions were then carried out for enhancing expression level and biological activity. Under optimum conditions of multiplicity of infection (MOI) = 5 and 48 h post transfection, the protein yield was up to 1.23 mg/ml. After purification by chromatographic techniques, the purified recombinant protein was applied to develop a direct competitive enzyme-linked receptor assay (ELRA) and the efficiency and reliability of the assay was determined. The IC50 values of clenbuterol, salbutamol, and ractopamine were 28.36, 50.70, and $59.57{\mu}g/l$, and clenbuterol showed 47.61% and 55.94% cross-reactivities with ractopamine and salbutamol, respectively. The limit of detection (LOD) was $3.2{\mu}g/l$ and the relevant recoveries in pork samples were in the range of 73.0-91.2%, 69.4-84.6%, and 63.7-80.2%, respectively. The results showed that it had better performance compared with other present nonradioactive receptorbased assays, indicating that the genetically modified ${\beta}_2-AR$ would have great application potential in detection of ${\beta}$-agonist residues.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.5
• /
• pp.202-206
• /
• 2005

Nitriding treatments were conducted on tool steel (SKD 61) at a temperature of $500^{\circ}C$ for 5 hr using high vacuum direct current (DC) plasma, with ammonia and argon as source gases. The structural and compositional changes produced in the nitrided layers by applying different ratios of Ar to $NH_{3}\;(n_{Ar}/n_{NH3}) were investigated using glancing x-ray diffraction (GXRD), optical microscopy, atomic force microscopy (AFM), micro-Vickers hardness testing, and pin-on-disc type tribometer. Nitriding case depths of around of $50{\mu}m$ were produced, varying slightly with different ratios of $n_{Ar}/n_{NH3}. It was found that the specimen surface hardness was 1150 Hv with $n_{Ar}/n_{NH3}=1, increasing to a maximum value of 1500 Hv with $n_{Ar}/n_{NH3}=5. With a further increase in ratio to $n_{Ar}/n_{NH3}=10, the surface hardness of the specimen reduced slightly to a value of 1370 Hv. These phenomena were caused by changes of the crystallographic structure of the nitride layers, i.e the $\gamma'-Fe_{4}N$ phase only was observed in the sample treated with $n_{Ar}/n_{NH3}$=1, and the intensity of the $\gamma'-Fe_{4}N$ phase were reduced but new phase of $\varepsilon'-Fe_{3}N$, which was known as a high hardness, with increasing $n_{Ar}/n_{NH3}. Also, the relative weight loss of counterface of the pin-on-disc with unnitrided steel was 0.2. And that of nitrided steel at a gas mixture ($n_{Ar}/n_{NH3}) of 1, 5, 7, and 10 was 0.4, 0.7, 0.6, and 0.5 mg, respectively. This means that the wear resistance of the nitrided samples could be increased by a factor of 2 at least than that of unnitrided steel.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.459-464
• /
• 2020

This study is a study that analyzes the user experience of a virtual makeup application in the beauty industry where color or formulation testing is important. Recently, cases of beauty smart stores and beauty applications using AR and AI are increasing. However, since virtual makeup is different from testing a real product, it is necessary to derive needs through research from the user's side. In order to compare user preferences by using AR and AI cases, six factors based on the emotional interface model were analyzed through a questionnaire to identify items with statistically significant figures. As a result, the user felt comfortable with the virtual makeup function, but showed that it needs to be supplemented in terms of reliability. Since this study focused on the customer experience as a real user and identified the main experience factors and needs of virtual makeup through two types of comparison, it is hoped that this study will be useful as a prior study.

• Communications for Statistical Applications and Methods
• /
• v.15 no.4
• /
• pp.531-542
• /
• 2008

The unit root test is the major tool for determining whether we use differencing or detrending to eliminate the trend from time series data. Dickey-Fuller test (Dickey and Fuller, 1979) has the low power of test when the sample size is small or the true coefficient of AR(1) process is almost unit root and the Bayesian unit root test has complicated testing procedure. We propose a new unit root testing procedure, which mixed Bayesian approach with the traditional testing procedure. Using simulation studies, our approach showed locally higher powers than Dickey-Fuller test when the sample size is small or the time series has almost unit root and simpler procedure than Bayesian unit root test procedure. Proposed testing procedure can be applied to the time series data that are not observed as process with unit root.

• Clinical and Experimental Pediatrics
• /
• v.53 no.11
• /
• pp.951-956
• /
• 2010

Purpose: To compare the profiles of the bronchodilator response (BDR) among children with asthma and/or allergic rhinitis (AR) and to determine whether BDR in these children is reduced by treatment with inhaled and/or nasal corticosteroid. Methods: Sixty-eight children with asthma (mean age, 10.9 years), 45 children with comorbid asthma and AR (mean age, 10.5 years), and 44 children with AR alone (mean age, 10.2 years) were investigated. After a 2-week baseline period, all children were treated with inhaled fluticasone propionate (either 100 or $250{\mu}g$ b.i.d., tailored to asthma severity) or nasal fluticasone propionate (one spray b.i.d. in each nostril) or both, according to the condition. Before and 2 weeks after starting treatment, all children were evaluated with spirometry and bronchodilator testing. BDR was calculated as a percent change from the forced expiratory volume in 1 second ($FEV_1$) at baseline. Results: The mean BDR was 10.3% [95% confidence interval (CI) 8.3-12.4%] in children with asthma, 9.0% (95% CI 7.3-10.9%) in subjects with asthma and AR, and 5.0% (95% CI 4.1-5.9%) in children with AR alone ($P$<0.001). After treatment, the mean BDR was reduced to 5.2% (95% CI 4.2-6.3%) ($P$<0.001) in children with asthma and to 4.5% (95% CI 3.5-5.5%) ($P$<0.001) in children with asthma and AR. However, children with rhinitis showed no significant change in BDR after treatment, with the mean value being 4.7% (95% CI 3.7-5.8%) ($P$=0.597). Conclusion: The findings of this study imply that an elevated BDR in children with AR cannot be attributed to nasal inflammation alone and highlights the close relationship between the upper and lower airways.