Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Specimen Size and Testing Velocity on Puncture Properties of Short-fiber Reinforced Chloroprene Rubber

시편 크기 및 시험속도가 단섬유 강화 클로로프렌 고무의 관통 특성에 미치는 영향

  • 류상렬 (영남대학교 기계공학부) ;
  • 이동주 (영남대학교 기계공학부)
  • Published : 2007.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The puncture properties of short-fiber reinforced rubber were investigated as functions of fiber aspect ratio(AR: length of fiber/diameter of fiber), fiber content, specimen size and testing velocity. The puncture stresses of the matrix and short-fiber reinforced rubber decreased with specimen size, and increased with testing velocity at same specimen size. As the fiber AR increased the puncture stress at given fiber content also increased. The problem of the specimen shape was investigated by the comparison of the tensile strength with puncture stress. The forces acting in the membrane wall of the matrix and the short-fiber reinforced rubber showed a similar data regardless of specimen size. And those increased with testing velocity at same specimen size. As the fiber AR increased the force acting in the wall at given fiber content also increased. Overall, it was found that the specimen size, testing velocity had an important effects on the puncture properties.

단섬유 강화고무의 관통 특성에 대해 섬유 종횡비(AR: 섬유 길이/섬유 직경), 섬유 함유량, 시편 크기 그리고 시험속도를 변수로 하여 연구하였다. 기지와 단섬유 강화고무의 관통 저항은 시편 크기의 증가에 따라 감소하였고, 동일한 시편 크기에서 시험 속도의 증가에 따라 관통 저항력은 증가하였다. 각각의 섬유 함유량에서 섬유 종횡비가 클수록 높은 관통응력 값을 보였다. 인장강도와 관통응력의 비교를 통해 시편 형상의 문제점에 대해 고찰하였다. 기지와 단섬유 강화고무의 막에 작용하는 힘은 시편의 크기에 관계없이 유사한 값을 보였고, 동일한 시편 크기에서 시험속도의 증가에 따라 증가하였다. 각각의 섬유함유량에서 섬유 종횡비가 클수록 막에 작용하는 힘은 크게 나타났다 전체적으로 시편 크기, 시험속도가 단섬유 강화고무의 관통 특성에 지대한 영향을 미침을 확인하였다.

Keywords

References

  1. Termonia Y., 'Puncture Resistance of Fibrous Structures,' Inter. J. of Impact Eng., Vol. 32, 2006, pp. 1512-1520 https://doi.org/10.1016/j.ijimpeng.2004.11.002
  2. Stevenson A. and Ab Malek K., 'On the Puncture Mechanics of Rubber,' Rubber Chemistry and Technology, Vol. 67, 1994, pp. 743-760 https://doi.org/10.5254/1.3538707
  3. Nguyen C. T., Vu-Khanh T. and Lalra J., 'Puncture Characterization of Rubber Membranes,' Theoretical and Applied Fracture Mechanics, Vol. 42, 2004, pp. 25-33 https://doi.org/10.1016/j.tafmec.2004.06.002
  4. Coran, A. Y., Boustany, K. and Hamed, P., 'Short-Fiber Rubber Composites,' Rubber Chemistry and Technology, Vol. 47, 1974, p. 396
  5. Goettler, L. A., Hand Book of Elastomers, Dekker., Inc., 1988, pp. 216-244
  6. Lee, D. J. and Ryu, S. R., 'A Study on Bursting Properties of Short-fiber Reinforced Chloroprene Rubber,' J. of the Korean Society of Mechanical Engineers(A), Vol. 30, No.5, 2006, pp. 543-549 https://doi.org/10.3795/KSME-A.2006.30.5.543
  7. Ryu, S. R. and Lee, D. J., 'Effects of an Interphase Condition on the Tensile and Fatigue Properties of Short-Fiber Reinforced Rubber,' International J. of Polymeric Materials, Vol. 52, No.5, 2003, pp. 415-429 https://doi.org/10.1080/00914030304927
  8. Ryu, S. R. and Lee, D. J., 'The Fracture Thoughness and Crack Propagation behavoir of Short-fiber Reinforced Ruber,' KSME Annuals Spring Conferences, 2000, pp. 85-90
  9. Ryu, S. R. and Lee, D. J., 'A Study on Dynamic Properties of Short-fiber Reinforced Chloroprene Rubber,' J. of the Korean Society for Composite Materials, Vol. 17, No.3, 2004, pp. 45-50
  10. Ryu, S. R. and Lee, D. J., 'A Study on Puncture Properties of Short-fiber Reinforced Rubber,' J. of the Korean Society for Composite Materials, Vol. 19, No.6, 2007, pp. 16-22
  11. Murphy, V. P. and Koerner, R. M., 'CBR strength (Puncture) of geosynthetics,' Geotechnical testing Journal, No.3, 1988, pp. 167-172
  12. The Rubber Society of Korea, The Basic Rubber Technology, 1983, p. 335
  13. Williams J. G., Stress Analysis of Polymers, 2nd(revised) Edition, Ellis Horwood limited, 1980, pp. 243-244