• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.169-184
• /
• 2024

This study investigates acoustic emission (AE) and micro-deformation characteristics of circular openings through biaxial compression experiments. The experimental results showed a significant increase in the frequency, count, energy, and amplitude of AE signals immediately before damage occurred in the circular opening. The differences in frequency and count between before and after damage initiation were significantly pronounced, indicating suitable factors for identifying damage occurrence in circular openings. The results for digital image correlation (DIC) technique revealed that micro-deformation was concentrated around the openings, as evidenced by the spatial distribution of strain. In addition, spalling was observed at the end of the experiments. The AE and micro-deformation characteristics presented in this study are expected to serve as fundamental data for evaluating the stability of underground openings and boreholes for deep subsurface projects.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.57-64
• /
• 1996

제지공장에서 사용하는 습윤제는 물의 표면장력을 낮춤으로써 목재섬유가 물을 빨리 흡수하여 팽윤하도록 도와준다. 목재섬유가 물을 흡수하여 팽윤하는 과정을 밝히지 위한 연구가 많이 진행되어 왔지만 목재섬유와 물의 상호작용을 상세히 연속적으로 측정할 방법이 전에는 별로 없었다. 목재섬유가 팽윤할 때 발생하는 팽윤압력은 음향방사를 동반하기 때문에 이를 측정하여 팽윤과정을 알아내는 기술이 개발되었다. 본 연구에서는 이 방법을 이용하여 목재를 여러 농도의 습윤제에 담갔을 때 발생하는 음향방사와 중량증가를 측정하여 이 두 변량의 상관을 조사하고 이 방법이 목재의 습윤과정 연구에 유용하게 사용될 수 있는지를 조사하였다. 아까시나무와 라디에타 파인의 두 수종을 사용하였는데 두 수종의 흡수 형태는 매우 달랐다. 5분 동안 용액에 침지하였을 때 후자가 전자보다 10배 정도 더 많이 중량증가하였으며, 발생한 음향방사도 후자가 전자보다 훨씬 많았다. 아까시나무의 중량증가와 음향방사는 습윤제 농도에 거의 무관하였으나 라디에타 파인의 음향방사는 습윤제 농도의 증가에 따라 증가하였으며 라디에타 파인의 중량증가는 습윤제의 표면장력 변화와 일치하였다. 수종별 중량증가와 음향방사의 관계는 아까시나무가 음의 상관을 나타냈으나 라디에타 파인은 양의 상관을 나타내었다. 자비처리 시편은 무처리 시편보다 음향방사가 적었다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.743-748
• /
• 2010

The stability forecasting of rock slope is more difficult than soil slope because catching the sign of failure in monitoring is not easy and deformation of the rock is small in failure process. But in the rock slope, there is small deformation like crack propagation in rock itself and it accumulates gradually in failure process. If it is possible to detect the small change in the rock slope, we can know the failure time exactly. Because the individual signal is gathered in the acoustic emission monitoring, it is possible to monitoring the slope if many sound signal is accumulated. Detection test of acoustic emission was performed. Uniaxial, two types of bending test, and two plane shear test were done with various cement paste sample. Wave propagation velocity of uniaxial test sample was increased with curing time. Wave Analysis give us the result that there is a AE sign signal before the failure, the AE count is suddenly increased. And frequency level 125kHz before failure is changed to level 200-250kHz after failure. In two plane shear test we can catch the AE signal and can know the failure type from wave shape. Monitoring test site is tunnel slope in Hongcheon but special signal is not collected.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.337-344
• /
• 2003

In this paper, we introduce a fully synthesizable 32-bit embedded microprocessor core called the AE32000B. The AE32000B core is based on the extendable instruction set computer architecture, so it has high code density and a low memory access rate. In order to improve the performance of the core, we developed and adopted various design options, including the load extension register instruction (LERI) folding unit, a high performance multiply and accumulate (MAC) unit, various DSP units, and an efficient coprocessor interface. The instructions per cycle count of the Dhrystone 2.1 benchmark for the designed core is about 0.86. We verified the synthesizability and the area and time performances of our design using two CMOS standard cell libraries: a 0.35-${\mu}m$ library and a 0.18-${\mu}m$ library. With the 0.35-${\mu}m$ library, the core can be synthesized with about 47,000 gates and operate at 70 MHz or higher, while it can be synthesized with about 53,000 gates and operate at 120 MHz or higher with the 0.18-${\mu}m$ library.

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.25-32
• /
• 2002

The tensile tests for [0/90]s, [90/0]s, and $[0/{\pm}45/90]s$ laminate composite were accomplished with acoustic sensor and failure processes were recorded by a video camera in real time. Also SEM examinations for fracture and side surface were carried out. The purpose of study is estimation of the failure mechanism and the mechanical properties effected by lay-up orientation for CFRP laminate composite with the hole notch. From the results, mechanical properties were obtained and they are similar between two kinds of cross-ply orientation in CFRP laminate composites, but not on $[0/{\pm}45/90]s$. And accordings to increasing the load, accumulate AE count was increased, regardless of lay-up orientation. Futhermore, failure mechanism was described by a video monitoring and SEM.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.157-164
• /
• 2004

Air voids in hardened concrete have an important influence on concrete durability such as resistance of freezing and thawing, permeability and surface scaling resistance. Linear traverse method and point count method in ASTM standard method have been widely used to estimate the air void system in hardened concrete. However, these methods are not used at present time, because they are is exhausted much time and effort. In previous study, air voids system of concrete was estimated by spacing factor. The purpose of this study organizes image analysis method by analyzing air contents, air voids distributions by diameters, air voids system as well as spacing factors after hardened concrete. The experimental variables institute of depth of specimen(top, middle, bottom), air contents(AE contents 0, 0.01, 0.03%).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.253-256
• /
• 2006

The HPFRCCs show the multiple crack and damage tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For practical application, it is needed to investigate the fractural behavior and of HPFRCCs and understand the micro-mechanism of cement matrix with reinforcing fiber. The objectives of this paper are to examine the compressive behavior, fracture and damage process of HPFRCC by acoustic emission technique. Total four series were tested, and the main variables were the hybrid type, polyethylene (PE) and steel cord (SC), and fiber volume fraction. The damage progress by compressive behavior of the HPFRCCs is characteristic for the hybrid fiber type and volume fraction. And from acoustic emission (AE) parameter value, it is found that the second and third compressive load cycles resulted in successive decrease of the ring-down count rate as compared with the first compressive load cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3341-3346
• /
• 2010

Dentifrices comtaining SLS of 2.2% and 0.0% were applied to 60 subjects for 4 weeks in this study. Dentifrice is used for salivary and oral bacteria amount change according to its SLS contents in toothpaste. The results were as follows. Anaysis of LSL contents befor and after the after experiment in salivary and bacterial count oral cavity didn't show significant difference in time interval. There was no correlation between salivary flow rate and bacterial count in the oral cavity according to content of SLS. Dentifrice of 2.2% content satisfied the subjects much more than that of 0.0% content(p<0.001).

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1152-1158
• /
• 2016

This study was used samples, mackerel (Scomber japonicas), Japanese Spanish mackerel (Scomberomorus niphonius), alaska pollock (Theragra chalcogramma), yellow croaker (larimichthys crocea) known as some of the major species fisheries products in Korea We were investigated temperature change during thawing processing, water holding capacity, drip loss, extractive-nitrogen and viable cell count by various thawing methods, thawing at the room temperature (TRT), hot-air thawing (HAT), aeration thawing (AT), high-frequency thawing (HFT). The temperature changes have taken 2~3 hours in HFT and 24 hours by TRT. The expressible drip loss was 0.47~0.87 g/100 g in HFT, 1.91~4.42 g/100g in TRT, 1.31~4.93 g/100g in HAT, and 2.01~4.59 g/100g in AE. The water holding capacity was higher samples thawing by HFT than other thawing methods. Extractive-nitrogen was 276~452 mg/100 g in HFT, 177.21~420.27 mg/100 g in TRT. Viable cell count was $10^2$ to $10^3$ in HFT, $10^3$ to $10^5$ in other thawing methods. The processing speed and uniformity by HFT was minimized the risk of product degradations (drip losses, deterioration of sensorial, chemical and physical characteristics, bacteria growth, etc.), thus helping to preserve at its best the product quality than those by thawing methods. Therefore, HFT was expected to make high-quality thawing products anticipate future thawing technology

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.218-221
• /
• 2008

The aim of this work was to establish the standard for goat milk somatic cell counts. The data were obtained from MGEN, which were collected from Dec. 2006 to Nov. 2007. A total of three hundred and forty somatic cell counts from 12 goat milk farms were analyzed. A goat milk grading system by somatic cell count is proposed; less than 1,000,000/mL, 1,000,000-1,500,000/mL, 1,500,000-2,000,000/mL, 2,000,000/mL-2,500,000/mL, and over 2,500,000/mL. Under the grading system, the ratio of first grade goat milk would be 26.2%, and that of the fifth grade would be 11.8%. The first grade ratio is low and the fifth grade ratio is high compared to the cow milk grading system. It is expected that somatic cell counts of domestic goat milk will be improved by the proposed grading system.