• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1481-1483
• /
• 2003

Molecular motions of polyaniline conducting blends were prepared. Surface resistance of its blends was investigated by a Surface Resistance Meter. DC electrical properties were investigated by Thermally Stimulated Currents(TSC) method and AC dielectric properties were investigated by Dielectric Thermal Analyzer (DETA) in the temperature range from $-50^{\circ}C$ to $120^{\circ}C$ at 1E0 Hz $^{\sim}$ 1E7 Hz for a comparative study of molecular relaxation. Using Scanning Electron Microscopy(SEM), relations of both microstructure and conduction behaviors was observed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.474-480
• /
• 2003

We designed and tested a new scan driver output stage. Compared to conventional CMOS structured scan driver IC′s, the new NMOSFET-only scan driver circuit can reduce the chip area and therefore, the chip cost considerably. We confirmed the circuit operation with open drain power NMOSFET IC′s by driving 2"PDP test panel. We defined critical device parameters and their optimization methods lot the best circuit performance.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.65-71
• /
• 1996

A novel lateral field emitter triode has been designed and fabricated. It has self-vacuum environmets and low turn-on voltage, so that the chief problems of previous field emission devices such as additional vacuum sealing process and high turn-on voltage are settled. An in-situ vaccum encapsulation empolying recessed cavities by isotropic RIE (reactive ion etch) method and an electron beam evaporated molybdenum vacuum seals are implemented to fabricate the new field emitter triode. The device exhibits low turn-on voltage of 7V, stabel current density of 2.mu.A/tip at V$_{AC}$ = 30V, and high transconductance (g$_{m}$) of 1.7$\mu$S at V$_{AC}$ = 22V. The superb device characteristics are probably due to sub-micron dimension device structure and the pencil type lateral cathode tip employing upper and lower LOCOS oxidation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2260-2264
• /
• 2012

The kinetics and mechanism of the pyridinolysis ($XC_5H_4N$) of dimethyl isothiocyanophosphate are investigated in acetonitrile at $55.0^{\circ}C$. The Hammett and Br$\ddot{o}$nsted plots for substituent X variations in the nucleophiles exhibit two discrete slopes with a break region between X = 3-Ac and 4-Ac. These are interpreted to indicate a mechanistic change at the break region from a concerted to a stepwise mechanism with a rate-limiting expulsion of the isothiocyanate leaving group from the intermediate. The relatively large ${\beta}x$ values imply much greater fraction of frontside nucleophilic attack TSf than that of backside attack TSb. The steric effects of the two ligands play an important role to determine the pyridinolysis rates of isothiocyanophosphates.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.279-286
• /
• 2015

Cotesia plutellae bracovirus (CpBV) is a polydnavirus symbiotic to C. plutellae parasitizing young larvae of the diamondback moth, Plutella xylostella. Several CpBV genes play important roles in suppressing immune responses of the parasitized larvae. This study tested a hypothesis that the CpBV genes inducing host immunosuppression could be applied to develop a potent recombinant baculovirus. Based on a previous study, a recombinant baculovirus expressing CpBV-ELP1 (AcMNPV-ELP1) was selected and multiplied using larvae of the beet armyworm, Spodoptera exigua. The recombinant viruses were produced in a yield of $5{\times}10^{10}$ polyhedral inclusion body (PIB)/larva. The cultured AcMNPV-ELP1 exhibited a much higher pathogenicity against S. exigua larvae. However, its insecticidal activity was varied among larval instars of S. exigua, in which first and late instars were high susceptible. Spray of the recombinant baculovirus ($5{\times}10^6PIB/mL$) exhibited higher control efficacy (${\approx}$ 88%) against S. exigua larvae infesting cabbage than a chemical insecticide, tebufenozide, at 7 days after treatment. These results indicate that AcMNPV-ELP1 mass-cultured using host insect system is highly pathogenic and can be applied to develop a novel microbial control agent.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.69-75
• /
• 2018

The key technology of Industry 4.0, Smart factory is evaluated as the driving force of our economic development hereafter and a lot of researches have been established. Various entities including devices, products and managers exist in smart factory, but roles of these entities may be continuous or variable and can become extinct not long after. Existing methods for access control are not suitable to adapt to the variable environment. If we don't consider certain security level, important industrial data can be the targets of attacks. We need a new access control method satisfying desired level of efficiency and security without excessive system loads. In this paper, we propose a new RBAC-PAC which extend AC defined for PKC to the authority attribute of roles. We distribute PACs for roles through block chain method to provide the efficient access control. We verified that RBAC-PAC is more efficient in the smart factory with large number of entities which need a frequent permission update.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.25-32
• /
• 2006

This paper proposes a regeneration inverter system, which can regenerate the excessive power form do bus line to ac source for traction system. The proposed regeneration inverter system for dc traction can reduce harmonics which are included to ac current source. The regeneration inverter is operated as two modes. In the regeneration inverter mode, it can recycle regenerative energy caused by decelerating tractions and in the active power filter mode, it can compensate harmonic distortion produced by the rectifier substation. In this paper, the regeneration inverter uses PWM DC/AC inverter algorithm and the active power filter uses p-q theory. From the informative simulation and experimental results, which are performed wiith a prototype rated 3.7[kw], it can expected that the proposed system can be effectively applied in the real traction system rated 100[kw].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.630-635
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-T$\sub$2/ superconductor(HTS). Thus we investigated previously the electrical and mechanical characteristics on Bi-2223 Ag sheathed tape. And a prototype HTS cable have been designed constructed and tested. In case of 19-filament type transport losses agree with the results of norris theory(strip). The critical current of HTS cable(1, 19-filament) in LN$_2$was 116[A], 240[A] and degradation coefficient(k) was 0.71, 0.73 respectively. In case of 19-filament cable critical current was decreased because of mechanical strain at pitch. And AC loss of HTS cable(19-filament) was 0.7 [W/m] in 240[A] loading

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.248-254
• /
• 2008

Electric railway system consists of traction power system, rolling stock, track, and overhead line system. A railway substation transforms the electric power transmitted from a electric power company and supply it to the railway power system for the operation of traction system.. It is very important to prevent a possible accident and keep the security of electric power system. This paper proposes a reliability analysis of AC railway substation by using Fault Tree Analysis(FTA). Failure rates of each equipment of railway substation are used to evaluate the reliability of railway substation. The analyzed results can be used to improve the system reliability. FTA is performed by the commercialized program of Relex(Ver. 7.7).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.29-37
• /
• 2006

Heavy chemical industries have nonlinear loads including elecrolyzers. AC-DC converters are the most widely used in an elecrolysis in a chemical plant. The electrolysis consists of AC-DC converter groups connected in parallel at the DC side. The converter operations cause harmonic currents and create distortions on the sinusoidal voltage of the AC power system. This paper provides an in depth analysis on harmonics field measurement for the electrolyzer loads and harmonics assessment by the international harmonic standards IEC 61000-3-6 and IEEE 519-1992.