• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.919-921
• /
• 1998

In Color AC Plasma Display Panel(PDP). Low luminous efficiency is a major problem. We measured luminous efficiency of PDP as a function of the Ar mixing ratio. Our results show that efficiency has improved by $5{\sim}10%$ at the condition of 0.5% Ar mixing ratio, compared with Ne-Xe(4%) or He-Ne-Xe(4%) (He:Ne = 7:3) gas.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.233-237
• /
• 2007

This paper deals with the new HVDC interaction which was observed in the Jeju-Haenam HVDC system. The interaction is not from a system malfunction or controller loop problem but from the change of AC network scheme and the network operating condition. We have found that the interaction is caused by the voltage oscillation between synchronous compensator and HVDC shunt reactor. We analyzed the cause of the interaction and suggested a solution.

• Clinics in Shoulder and Elbow
• /
• 제26권2호
• /
• pp.140-147
• /
• 2023

Background: The management of acromioclavicular (AC) joint dislocation remains controversial. Recently, anatomic coracoclavicular (CC) fixation with a double clavicular tunnel and three flip-buttons has shown promising results. This study aimed to evaluate functional and radiological outcomes in patients with high-grade AC joint dislocation treated with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Methods: A retrospective, unicentric study was performed. The study included patients with high-grade AC joint dislocation who underwent surgery with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Demographic data were obtained from medical records. A functional evaluation using subjective shoulder value (SSV), visual analog scale (VAS), and disabilities of the arm, shoulder, and hand (DASH) questionnaires was performed, and an evaluation of preoperative and postoperative comparative Zanca view images was performed. Factors associated with functional outcomes and radiological AC reduction were analyzed. Results: A total of 83 patients completed follow-up and were included in the analysis. The mean SSV, VAS, and DASH scores were 92.8, 0.8, and 6.4, respectively. Patients who had complications experienced significantly worse functional outcomes (DASH: P=0.037). Suboptimal final AC reduction was observed in nine patients (11.1%), and significantly more frequently in patients older than 40 years (P=0.031) and in surgeries performed more than 7 days after injury (P=0.034). There were two reoperations (2.4%). Conclusions: Anatomic CC fixation with a double clavicular tunnel and three flip-buttons leads to good functional outcomes, low complication rates, and high rates of optimal AC reduction.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.490-498
• /
• 2002

본 논문에서는 전압형 PWM 컨버터의 교류 입력측 LCL 필터의 설계기법을 제안한다 기존의 전압형 PWM 컨버터에서 전원계통으로 흘러 들어가는 스위칭 고조파전류를 억제하기 위해 교류 입력측에 LCL 필터를 설치하는 것은 매우 경제적이고 효과적인 방법이다 필터 커패시터로 스위칭 고조파전류를 흡수하며 공진을 억제하기 위해 수동 댐핑 저항을 이용한다 UPS용의 LCL 필터 구조 PWM 컨버터의 설계예시를 보였으며 제안한 설계기법의 타당성을 입증하기 위해 PSIM을 이용한 시뮬레이션을 행하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.301-304
• /
• 2012

Epoxy/microsilica (65 phr)/nanosilica (0~5 phr) composites (EMNC) were prepared in order to develop a high-voltage insulation material, where phr means parts per hundred relative to the epoxy oligomer. Tensile and flexural tests of the composites were carried out, and the AC electrical breakdown strength was measured, after which all the data were estimated by Weibull statistical analysis. As the nanosilica content increased, the tensile strength increased, and the highest value was 117.7 MPa in the EMNC system with 3 phr nanosilica, which was ca. 10% higher than that of the system without nanosilica. The value then decreased after 3 phr. The flexural strength and AC electrical breakdown strength showed the same tendencies as the tensile strength. The highest value of the flexural strength was 184.6 MPa in the EMNC system with 3 phr of nanosilica, which was ca. 15% higher than that of the system without nanosilica. The strongest value of the AC electrical breakdown strength was 79.0 kV/0.5 mm in the EMNC system with 3 phr of nanosilica, which was ca. 34% higher than that of the system without nanosilica.

• 조명전기설비학회논문지
• /
• 제21권7호
• /
• pp.109-116
• /
• 2007

다상 브러시리스 교류전동기의 역기전력 파형은 일반적으로 이상적인 정현파나 사다리꼴 형태가 아니다. 그러므로 이상적인 역기전력을 가정하는 기존의 모델로 다상 BLAC 전동기의 특성을 시뮬레이션 또는 해석하는 경우에는 많은 오차가 발생할 수 있다. 본 논문에서는 이러한 오차를 감소시키기 위해 FEA 기반의 회로 및 수식 기반의 혼합 모델링 기법을 이용한 상변수 모델을 제안하였다. FEA로부터 얻어진 역기전력 파형을 포함한 상모델의 파라미터를 사용하는 제안된 혼합 모델링기법은 임의의 역기전력 전압파형을 갖는 다상 브러시리스 교류전동기의 시뮬레이션과 해석에 사용할 수 있다. 제안한 기법을 7상 BLAC 전동기에 적용한 시뮬레이션 및 실험 결과로부터 모델의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.222-232
• /
• 2007

This paper presents the application of a single phase AC-to-DC converter using a three-phase series parallel (SPRC) resonant converter to variable speed dc-drive. The improved power quality converter gives the input power factor unity over a wide speed range, reduces the total harmonic distortion (THD) of ac input supply current, and makes very low ripples in the armature current and voltage waveform. This soft-switching converter not only possesses the advantages of achieving high switching frequencies with practically zero switching losses but also provides full ranges of voltage conversion and load variation. The proposed drive system is the most appropriate solution to preserve the present separately excited de motors in industry compared with the use of variable frequency ac drive technology. The simulation and experimental results are presented for variable load torque conditions. The variable frequency control scheme is implemented using a DSP- TMS320LF2402. This control reduces the switching losses and current ripples, eliminates the EMI and improves the efficiency of the drive system. Experimental results confirm the consistency of the proposed approach.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.586-591
• /
• 2021

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.620-625
• /
• 2007

The effects of $Gd_2O_3$ addition and sintering condition on optical and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. Doped MgO films prepared by the e-beam evaporation have a higher ${\Upsilon}$ (secondary electron emission coefficient) than pure MgO protective layer. Relative density and grain size increased with amount of $Gd_2O_3$ up to 100 ppm and then decreased further addition. These results showed that discharge properties and optical properties of MgO protective layers seemed to be closely related with microstructure factors such as relative density and grain size. Good optical and electrical properties of ${\Upsilon}$ of 0.138, surface roughness of 5.77 nm and optical transmittance of 95.76 % were obtained for the MgO+100 ppm $Gd_2O_3$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.

• 한국정보통신학회논문지
• /
• 제21권7호
• /
• pp.1261-1266
• /
• 2017

지연 시간 전압 분산 변환기 (DVVC) 및 평균 회로 (AC)가 있는 지터 억제 지연 고정 루프 (DLL) 기반 클록 발생기를 제안하였다. 제안한 클록 발생기는 지연고정루프에서 무작위로 발생하는 지터와 회로의 구조에 의해 발생하는 지터를 억제하도록 하였다. 지연 시간 전압 분산 변환기는 각 지연단의 지연 차이를 감지하고 출력 전압을 생성한다. 평균회로는 두개의 연속되는 지연 시간 전압 분산 변환기의 출력 전압을 평균화 한다. 지연 시간 전압 분산 변환기 및 평균 회로는 연속적인 지연단의 지연 시간을 평균화하고 모든 지연단의 지연 시간을 동일하게 만든다. 또한 루프필터 출력 전압의 변동을 줄이기 위해 부궤환 기능으로 효과적인 작동을 하는 스위치가 있는 커패시터가 도입되었다. One-poly six-metal $0.18{\mu}m$ CMOS 공정으로 제작 된 DLL 기반 클록 발생기의 측정 결과는 13.4 ps rms 지터특성을 보여준다.