• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.723-727
• /
• 2004

A new high-performance and low cost single switch energy recovery display driver for an AC plasma display panel (PDP) is proposed. Since it is composed of only one auxiliary power switch, two small inductors, and eight diodes compared with the conventional circuit consisting of four auxiliary power switches, two small inductors, eight power diodes, and two external capacitors, it features a much simpler structure and lower cost. Nevertheless, since the rootmean-square (RMS) value of the inductor current is very small, it also has very desirable advantages such as n low conduction loss and high efficiency. Furthermore, there are no serious voltage-drops caused by the large gas-discharge current with the aid of the discharge current compensation, which can also greatly reduce the current flowing through power switches and maintain the panel to light at n lower sustaining voltage. In addition, all main power switches are turned on under the zero-voltage switching (ZVS) and thus, the proposed circuit has a improved EMI, increased reliability, and high efficiency. Therefore, the proposed circuit will be well suited to the wall hanging PDP TV. To confirm the validity of the proposed circuit, circuit operations, features,and design considerations are presented and verified experimentally on a 6-inch PDP, 50kHz-switching frequency, and sustaining voltage 141V based prototype.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.944-947
• /
• 2005

Highly stable gate driver circuit using a-Si TFT has been developed. The circuit has dual-pull down structure, in which bias stress to the TFTs is relieved by alternating applied voltage. The circuit has been successfully integrated in 4-in. QVGA and 14-in. XGA TFT-LCD with a normal a-Si process, which are stable for over 2,000 hours at $60^{\circ}C$. The enhancement of stability of the circuit is attributed to retarded degradation of pull-down TFTs by AC driving.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.237-239
• /
• 2004

Wireless LAN Voice over IP(VoIP) equipment needs Quality-of-Service(QoS) with priority for processing real-time traffic. This paper shows transmit function implementation of wireless LAN(WLANs) media access control(MAC) support VoIP, and it has an advantage of guarantee of QoS and is adaptable to VoIP or mobile wireless equipment. The IEEE 802.11e standard in progress has four queues according to four access categories(AC) for transmit and the MAC transmits the data based on EDCA. The value of AC is from AC0 to AC3 and AC3 has the highest priority. The transmit method implemented at this paper ensure QoS using one transmit FIFO in hardware since real-time traffic data and non real-time traffic data has the different priority. The device driver classifies real-time data and non real-time data and transmit data to hardware with information about data type. The hardware conducts shorter backoff and selects faster AIFS slot for real-time data than it for non real-time data. Therefor It make give the real-time traffic data faster channel access chance than non real-time data and enhances QoS.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.378-385
• /
• 2007

AC PDP has disadvantages that power consumption and sustain voltage are high. An energy recovery circuit for AC PDPs with reduced sustain voltage was proposed to solve these disadvantages. However, the circuit has disadvantage that the switching elements are performed hard switching at the start point of discharge and sustaining region. The reason is that the panel voltage is lower than sustain voltage at that point. In this paper, we propose the improved driving method that switching devices are operated with ZVS by using CIM(Current Infection Method) also at that point. CIM region is designed by theoretical circuit analysis. Finally, the validity of the proposed driving method is verified by the simulations and experimentation.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.640-650
• /
• 2018

A TRIAC dimmable LED driver with a wide tuning range and a two-stage uniform dimming scheme is proposed in this paper. To solve the restricted dimming range problem caused by the limited conduction ratio of TRIAC dimmers, a conduction ratio compensation technique is introduced, which can increase the output current up to the rated output current when the TRIAC dimmer turns to the maximum conduction ratio. For further optimization, a two-stage uniform dimming diagram with a rapid dimming curve and a slow dimming curve is designed to make the LED driver regulated visually uniform in the whole adjustable range of the TRIAC dimmer. The proposed control chip is fabricated in a TSMC $0.35{\mu}m$ 5V/650V CMOS/LDMOS process, and verified on a 21V/500mA circuit prototype. The test results show that, in the 90V/60Hz~132V/60Hz ac input range, the voltage linear regulation is 2.6%, the power factor is 99.5% and the efficiency is 83%. Moreover, in the dimming mode, the dimming rate is less than 1% when the maximum dimming current is 516mA and the minimum dimming current is only about 5mA.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.466-466
• /
• 2000

This paper presents the sinusoidal current ministep technique to drive stepping motor. The stepping motor is coupling to the increment encoder to detect the position and speed of the stepping motor. The data from the encoder is decoded to sine and cosine signal and fed to the driver system. The driver system has two loops control, the inner loop and the outer loop. The inner loop is used to control the rotating of the stepping motor and the outer is used to control the speed of the motor. The rotating of the stepping motor is controlled with the sinusoidal signal. The test results of the inner loop control can control the revolution of the stepping motor is smooth and continuously with similar to the DC motor. The outer loop uses to control the speed of the stepping motor with control the DC voltages apply to the driver. The DC voltages that apply to the driver is controlled by the AC-DC converter The test results of the outer loop control, it can control the speed of motor which is provide the any load in the design.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.135-136
• /
• 2016

본 논문은 무손실 스너버를 갖는 부스트-플라이백 역률보상 컨버터 기반의 단일 스위치 AC-DC LED(Light Emitting Diode) 드라이버를 제안한다. 제안된 LED 드라이버는 높은 역률을 얻기 위한 부스트 역률 개선 회로와 전기적 절연을 위한 무손실 스너버를 갖는 DC-DC 플라이백 모듈로 구성된다. 무손실 스너버에 의해 스위치의 서지 전압 스트레스는 감소하며 누설 인덕터의 에너지가 DC 링크 커패시터에 저장되어 재사용된다. 또한 낮은 정격 전압의 DC 링크 커패시터를 사용할 수 있다. 제안된 컨버터는 이론적 해석과 100[W]급 하드웨어 시작품을 제작하여 검증하였다.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.884-891
• /
• 2009

An address voltage stabilization circuit for the single-side driving (SSD) method for AC plasma display panels (PDP) is proposed. The single-side driving method, which eliminates a common sustaining driver, uses only two electrodes in a three electrode AC PDP structure. The high-impedance (Hi-Z) mode operation of the data drive ICs during the sustaining period is needed for surface gas-discharge without misfiring in the SSD method but it produces the problem that the address voltage increases up to the breakdown voltage. The proposed circuit based on a flyback converter can stabilize the address voltage under the breakdown voltage and provide better surface gas-discharge performance without any misfiring in the SSD scheme.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.40-46
• /
• 2010

DC link electrolytic capacitors are widely used in various PWM power converter system, such as adjustable speed driver(ASD) or DC/DC converter. Electrolytic capacitors, which is the most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. This objective of this paper is to propose a improvement method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC link of PWM power converter. The ESR detection scheme is based on the determination of the electrolytic capacitor AC losses calculated from voltage/current measurement using AC coupling. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity compare with BPF method. Simulation results show the veridity of the proposed on-line ESR estimation method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.3
• /
• pp.167-181
• /
• 2001

A stepwise driving method was used for reducing the AC power consumption in a TFT-LCD. The AC power takes the largest portion of the total power consumption of a TFT-LCD. Experimental results confirmed that the AC power saving efficiency reached up to 75% when a 5-stepwise driving with each step time of $2\mu$ sec was applied to a 14.1 inch-diagonal XGA TFT-LCD. The second largest component of power consumption called the DC power comes from the quiescent currents in Op-amps. A simple and efficient architecture was proposed in this work to reduce this DC power consumption: Half of the Op-amps have the 5V-supplies, and the rest half have the 10V-supplies, and two Op-amps are shared by adjacent two channels. Measurements of test circuits showed that this simple method could reduce over 40% of the DC power consumption..