• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.7-17
• /
• 2014

Power electronics modules are semiconductor components that are widely used in airplanes, trains, automobiles, and energy generation and conversion facilities. In particular, insulated gate bipolar transistors(IGBT) have been widely utilized in high power and fast switching applications for power management including power supplies, uninterruptible power systems, and AC/DC converters. In these days, IGBT are the predominant power semiconductors for high current applications in electrical and hybrid vehicles application. In these application environments, the physical conditions are often severe with strong electric currents, high voltage, high temperature, high humidity, and vibrations. Therefore, IGBT module packages involves a number of challenges for the design engineer in terms of reliability. Thermal and thermal-mechanical management are critical for power electronics modules. The failure mechanisms that limit the number of power cycles are caused by the coefficient of thermal expansion mismatch between the materials used in the IGBT modules. All interfaces in the module could be locations for potential failures. Therefore, a proper thermal design where the temperature does not exceed an allowable limit of the devices has been a key factor in developing IGBT modules. In this paper, we discussed the effects of various package materials on heat dissipation and thermal management, as well as recent technology of the new package materials.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.570-575
• /
• 2005

Malfunction by electrical surges is a serious problem on earth leakage current breakers(ELBs) used in a low voltage AC power system. In this paper, we tested ELBs according to IEC 61009-1 and KS C 4613 to analyze surge influence on ELB's malfunction. The test by application of surge voltage is specified both standards, but the test by application of surge current is specified only in IEC 61009-1. The experimental results showed that the ELBs used in this test are robust to surge voltage application, but the malfunction occurred to surge current application. Surge current is more frequent than surge voltage in actual situation. Therefore, ELBs should be tested by the surge current, and the domestic standard, KS C 4613, should includes a test procedure by the surge current application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.489.2-489.2
• /
• 2014

The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.65-72
• /
• 1999

This paper tried to find out the various symbolic meanings and functions of landscape elements which Capital City of Shilla Dynasty contains, and what is the symbolism and identity of the city. Basically, this research took the thought of the place and the theory of cognition on landscape as a research tool, and undertook the process of surveying the physical surroundings of the city such as mountains, forests, tumuluses, mountain fortress walls, etc. Especially, the study referenced to a myth, thought, and a tale related to them of the surroundings. The research scope in time had been reached to the year of BC 57 which is beginning year of Shilla Dynasty form AC 467 which is year of introduction of new urban block system delivered from Dang Dynasty of ancient China. The results of research showed symbolic meanings of mountains and forests which is surrounding the Shilla capital from 4 directions of east, west, south and north. Namely, it was the places that the king of the kingdom of Shilla decent into the earth from the heaven. Also, the tumuluses which are located on the center of the capital imitated the surrounding mountains in forms, meaned the place that the dead king rised to heaven. All of these symbolized the Capital City of Dynasty as a sacred city which linked the heaven to earth, and earth to heaven. Finally, this paper suggested the Kyongju which is one of the most representative historic and tourist city in Korea should reflect this kind of symbolic meaning of ancient Capital City of Shilla Dynasty in case of arranging the urban identity plan to promote the quality of urban environment of Kyongju.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.78-78
• /
• 2017

Pure Titanium and alloy have been widely used in dental implants and orthopedics due to their excellent mechanical properties, biocompatibility and corrosion resistance. However, due to the biologically inactive nature of Ti metal implants, it cannot bind to the living bone immediately after transplantation into the body. In order to improve the bone bonding ability of titanium implants, many attempts have been made to alter the structure, composition and chemical properties of titanium surfaces, including the deposition of bioactive coatings. The PEO method has the advantages of short experiment time and low cost. These advantages have attracted attention recently. Recently, many metal ions such as silicon, magnesium, zinc, strontium, and manganese have received attention in this field due to their impact on bone regeneration. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation and promotes bone metabolism and growth. Manganese (Mn) is an essential trace metal found in all tissues and is required for normal amino acid, lipid, protein and carbohydrate metabolism. The objective of this work was research on the corrosion behavior of Si, Zn and Mn-doped hydroxyapatite on the PEO-treated surface. Anodized alloys was prepared at 270V~300V voltage in the solution containig Zn, Si, and Mn ions. Ion release test was carried out using potentidynamic and AC impedance method in 0.9% NaCl solution. The surface characteristics of PEO treated Ti-6Al-4V alloy were investigated using XRD, FE-SEM, AFM and EDS.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.11a
• /
• pp.153-159
• /
• 1996

${\alpha}$-Melanotropin (Ac-Ser-Tyr- Ser-Met-Glu$\^$5/-His-Phe-Arg-Trp-Gly$\^$10/-Lys-Pro-Val-NH$_2$) is one of the first peptide hormones to be isolated and have its structure determined. It was early recognized to have essentially the same N-terminal tridecapeptide sequence as adrenocorticotropic hormone (ACTH) except that the N-terminal was acetylated in the case of ${\alpha}$-MSH but not in the case of ACTH, indicating that their biosyntheses were different (Figure 1). Subsequently it was discovered that ${\alpha}$-MSH and ACTH were derived from the same gene, currently referred to as proopiomelanocortin (POMC). Its original bioactivity was pigmentation, but it also was recognized that it may have activity in the central nervous system, though the precise nature of these central activities have been controversial. The recent cloning and expression of five melanocortin receptors, with the MC3 and MC4 receptors found primarily in the brain and the MC5 receptor (MC5-R) found throughout the body, has provided new impetus to understand the structure-activity relationships of ${\alpha}$-MSH at these receptors. The effects of ${\alpha}$-MSH on pigmentation are mediated by the MC1-R expressed specifically on the surface of melanocytes. Similarly the MC2-R is involved in the regulation of adrenal steroidogenesis by ACTH. However, given the complexity of expression of the MC3, MC4, and MC5 receptors, it has not been possible to identify any simple correlations between these receptors and the reported biological activities of the melanocortin peptides. Consequently, potent and receptor specific agonists and especially antagonists would be extremely valuable tools for the determination of the physiological roles of the MC3, MC4, and MC5 receptors. Though the extensive structure-activity relationships have provided much information on agonist activity related to pigmentary effects, only recently has it been possible to begin to systematically develop potent and selective antagonists.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.71-80
• /
• 2002

According to the rapid growth of high speed and precise industry, the application of synchronous motor has been increased. In the application fields, these fast dynamic response is of prime importance. In particular, since the PMLSM(Permanent Magnet Linear Synchronous Motor) has characteristics of high speed, high thrust, it has been used in high-performance servo drive. From these reasons, it is recently used for high precise position control, and machine tool. In this paper, a study of the sliding mode with VSS (Variable Structure System) design for a PMLSM is presented. For fast and precise motion control of PMLSM, the compensation of disturbance and parameter variation is necessary. Hence we eliminate the reaching phase use of VSS that is changed to switching function and vector control using the state observer. And we proposed to sliding mode control algorithm so that realize fast response without overshoot, disturbance and parameter variation.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.51-62
• /
• 2006

The load of this kind of gores, which is heavier than that of any other precedent, and on enormous seamless virtual world characterize the MMORPG(Massively Multiplayer Online Role-Playing Game) genres. In this seamless environment, gamers can usually accept a set of independent spaces, which is being held by independent game servers, os a single big virtual world. Despite the efforts of some developers, gamers are suffered from huge message traffic which comes from the interaction between client and server and the interaction between fold sowers. In this paper, new gore server architecture using MigAgent is proposed which tries to reduce message traffic. Usually, message traffic reaches the climax when a PC(Player Character) is moving to other field server. MigAgent, designed in this thesis, tries to manage this kind of PCs and to ploy o role of user's agent to prepare for the unexpected situation. Improvement of this system is shown by the analysis of the effect of the size ratio of AOI (Area of Interest) and AC (Adjacent Cell).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.117-118
• /
• 2000

The secondary electron emission coefficient ${\gamma}$ of MgO single crystals according to the gas mixture ratio of Xe to Ne have been investigated by ${\gamma}-focused$ ion beam system. It is found that the MgO single crystals of (111) crystallinity has the highest ${\gamma}$ from 0.09(0.03) up to 0.16(0.04), while from 0.07(0.02) to 0.15(0.03) for (200) and from 0.06(0.01) to 0.13(0.02) for (220) crystallinity for operating Ne (Xe) ions ranging from 50eV to 200eV throughout this experiment. And it is found that the ${\gamma}$ ranged from 0.03 up to 0.06 for Ne-Xe mixtures are much smaller than those of 0.09 up to 0.16 for pure Ne ions under accelerating voltage ranged from 50V to 200V.