• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.287-291
• /
• 1975

In order to observe the kinetic of ciliates inhabited in the stomach, investigation of the content juice in the stomach was carried out on the 30 Korean native cattle, selected as healthy ones and slaughtered at Jeonju abattoir in August, 1974. The following is a brief summary of the leading facts gained through the experiment. 1. The average pH of the content juice showed $6.567{\pm}0.056$(SE) in the rumen, $6.607{\pm}0.053$ in the reticulum, $6.183{\pm}0.056$ in the omasum and $2.627{\pm}0.061$ in the abomasum. 2. The presumed number of ciliates per ml was calculated $168,200{\pm}17,035$(SE) in the rumen, $173,200{\pm}19,728$ in the reticulum, $23.600{\pm}3.537$ in the omasum and $467{\pm}266$ in the abomasum. 3. In the content juice the number of ciliates was gradually slowed down, the pH decreased from rumen to abomasum and the changes were denoted by quadratic curves(parabolas). 4. In accordance with the increase of the number of ciliates the pall also becomes higher and in this situation the correlation coefficient was ${\gamma}_{xy}=0.508$. 5. Population density of ciliates was checked and Entodinium showed 60 per cent among them, but Polyplastron was figured only from 0 to 0.05 per cent. 6. Among 26 species of ciliates which were identified from the content juice, Entodinium simplex was showed the highest population density, raging from 40 to 50 per cent, Dasytricha ruminantium was neat to it, Eudiplodinium affine after the next, and Entodinium caudatum and Eudiplodinium maggi were also found abundantly in the abomasum.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.423-431
• /
• 2009

There are various image retrieval methods using shape, color and texture features. One of the most active area is using shape and color information. A number of shape representations have been suggested to recognize shapes even under affine transformation. There are many kinds of method for shape recognition, the well-known method is Fourier descriptors and moment invariant. The other method is CSS(Curvature Scale Space). The maxima of curvature scale space image have already been used to represent 2-D shapes in different applications. Because preexistence CSS exists several problems, in this paper we use improved CSS method for retrieval image. There are two kinds of method, One is using RGB color information feature and the other is using HSI color information feature. In this paper we used HSI color model to represent color histogram before, then use it as comparison measure. The similarity is measured by using Euclidean distance and for reduce search time and accuracy, We use DTW for measure similarity. Compare with the result of using Euclidean distance, we can find efficiency elevated.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.263-275
• /
• 2001

With increasing of utilization of 1/1,000 Digital-Map being constructed with NGIS project, it is entering upon the stage that problem as the inspection of position accuracy of Digital-Map before its use. This paper evaluated position accuracy of Digital-Map being based on the construction of college facility management system into small area and presented modification/renovation of Digital-Map on area being occurred position error. With a view to evaluation of position error to building using RTK survey, position error was shown more than 0.5mm that is prescribed in survey-law. In order to acquire good position accuracy, first we carried out Static survey to college and selected control point. And, we evaluated coordinate value to important building from control point and compared these results with RTK survey results. Second, we carried out Affine transform based on the control point of building being surveyed with RTK, transformed pre-constructed Digital-Map and compared these results with RTK Survey results. We analyzed first and second method and presented improvement method of position accuracy of Digital-Map suited on small area.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.153-164
• /
• 2010

To determine the clinical target volumes considering vascularity and cellularity of tumors, the software was developed for mapping of the analyzed biological clinical target volumes on anatomical images using regional cerebral blood volume (rCBV) maps and apparent diffusion coefficient (ADC) maps. The program provides the functions for integrated registrations using mutual information, affine transform and non-rigid registration. The registration accuracy is evaluated by the calculation of the overlapped ratio of segmented bone regions and average distance difference of contours between reference and registered images. The performance of the developed software was tested using multimodal images of a patient who has the residual tumor of high grade gliomas. Registration accuracy of about 74% and average 2.3 mm distance difference were calculated by the evaluation method of bone segmentation and contour extraction. The registration accuracy can be improved as higher as 4% by the manual adjustment functions. Advanced MR images are analyzed using color maps for rCBV maps and quantitative calculation based on region of interest (ROI) for ADC maps. Then, multi-parameters on the same voxels are plotted on plane and constitute the multi-functional parametric maps of which x and y axis representing rCBV and ADC values. According to the distributions of functional parameters, tumor regions showing the higher vascularity and cellularity are categorized according to the criteria corresponding malignant gliomas. Determined volumes reflecting pathological and physiological characteristics of tumors are marked on anatomical images. By applying the multi-functional images, errors arising from using one type of image would be reduced and local regions representing higher probability as tumor cells would be determined for radiation treatment plan. Biological tumor characteristics can be expressed using image registration and multi-functional parametric maps in the developed software. The software can be considered to delineate clinical target volumes using advanced MR images with anatomical images.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.79-86
• /
• 1999

This study was carried out to estimate the area of damaged forest and the volume of stand tree in burned area, Mt. Weol-A in eastern Chinju, Korea using digital maps derived from supervised classification of Landsat thematic mapper(TM) imagery as reference data. Criterion laser estimator and WinDENDRO$^{tm}$(v. 6.3b) system as a computer-aided tree ring measuring system were used to measure a volume and age of sampled tree. The sample site had been chosen in unburned areas having the same terrain condition and forest type of burned areas. The tree age, diameter at breast height, tree height and volume of the sample tree selected from sample site in unburned area were 27years, 20.9cm, 9.7m and $0.1396m^3$ respectively. Total stand volume of sample site was estimated $2.9316m^3$/0.04ha, Damaged stand volume evaluated to about $16,007m^3$ in the burned area of 218.4ha.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.425-432
• /
• 2009

The purposes of the study were to examine cerebellar areas and lateralization responsible for visuospatial and verbal tasks using functional Magnetic Resonance Imaging(fMRI). Eight healthy male college students($21.5\;{\pm}\;2.3$ years) and eight male college students($23.3\;{\pm}\;0.5$ years) participated in this fMRI study of visuospatial and verbal tasks, respectively. Functional brain images were taken from 3T MRI using the single-shot EPI method. All functional images were aligned with anatomical images using affine transformation routines built into SPM99. The experiment consisted of four blocks. Each block included a control task(1 minute) and a cognitive task(1 minute). A run was 8 minutes long. Using the subtraction procedure, activated areas in the cerebellum during the visuospatial and verbal tasks were color-coded by t-score. A cerebellar lateralization index was calculated for both cognition tasks using number of activated voxels. The activated cerebellar regions during the both cognition tasks of this study agree with previous results. Since the number of activated voxels of the left and right cerebellar hemisphere was almost same, there was no cerebellar lateralization for both cognition tasks.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.28-36
• /
• 2022

As port structures are exposed to various extreme external loads such as wind (typhoons), sea waves, or collision with ships; it is important to evaluate the structural safety periodically. To monitor the port structure, especially the rubber fender, a fender segmentation system using a vision sensor and deep learning method has been proposed in this study. For fender segmentation, a new deep learning network that improves the encoder-decoder framework with the receptive field block convolution module inspired by the eccentric function of the human visual system into the DenseNet format has been proposed. In order to train the network, various fender images such as BP, V, cell, cylindrical, and tire-types have been collected, and the images are augmented by applying four augmentation methods such as elastic distortion, horizontal flip, color jitter, and affine transforms. The proposed algorithm has been trained and verified with the collected various types of fender images, and the performance results showed that the system precisely segmented in real time with high IoU rate (84%) and F1 score (90%) in comparison with the conventional segmentation model, VGG16 with U-net. The trained network has been applied to the real images taken at one port in Republic of Korea, and found that the fenders are segmented with high accuracy even with a small dataset.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.584-589
• /
• 1995

To select new useful plants with antibacterial activity, ninety five sample of eighty different species of wild plants were collected, and extracted with methanol. Antibacterial activity of the methanol extracts was tested against Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Vibrio parahaemolyticus. The methanol extracts from Artemisia capillaris, Hemistepta lyrata, Youngia japonica, Prunella vulgaris, Lamium amplexicaule and Juniperus chinensis was effective against all bacterial strains tested, and eight methanol extracts including Ixeris dentata, Gnaphalium affine, Chelidonium majus and Spiraea prunifolia exhibited the antibacterial activity against at least 3 bacterial strains. Methanol extracts from leaf of Syringa vulgaris, Drava nemorosa and clove of Erythronium japonicum showed a selective antibacterial activity against two gram negative bacteria, V. parahaemolyticus, and B. subtilis, respectively. With investigations on antibacterial activity against a certain bacterial strains tested, metahnol extracts from clove of Erythronium japonicum, Spiraea prunifolia, leaf and twig of Camelia japonica, and Drava nemorosa showed strongest activities against B. subtilis, S. aureus, E. coli, and V. parahaemolyticus, respectively. Nine methanol extracts based on the results were successively fractionated with n-hexane, chloroform, ethyl acetate and water portions, which were examined antibacterial activity against B. subtilis and V. parahaemolyticus. Among the all fractions tested, chloroform fractions of Hemistepta lyrata showed strongest antibacterial activity against both B. subtilis (17mm) and V. parahaemolyticus (29 mm). Chloroform fractions of Youngia japonica, n-hexane fractions of Artemisia capillaris, Iexeris dentata and Prunella vulgaris, and ethyl acetate fraction of leaf and twig of Camelia japonica showed relatively a strong antibacterial activity. On the other hand, Juniperus chinensis and Equisetum arvense was distributed to all fractions except for water fraction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.561-571
• /
• 2020

Seven techniques widely used in the geodetic transformations have been reviewed and compared to figure out their theoretical characteristics. A series of numerical tests were performed about four data sets. This was followed by result analyses in terms of transformation residuals and accuracies together with some hypothesis testings based on the student-t distribution to confirm the statistical significance of the techniques. In the case of the transformation between the geodetic frames implemented in the same system, no statistical significance was revealed in the results of the 3D transformation techniques, even if the testing area becomes large as the Asia-Oceania continent. Among the 2D transformations, it was possible for the NTv2 grid modeling technique to deliver improved transformation accuracy. Finally, it was possible from the results analyzed in this study to propose the Helmert transformation to geodetic control points and the NTv2 technique to the 2D spatial data transformation of the geodetic systems.