• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.914-917
• /
• 2002

Fabrication of micro carbon structures and patterns using laser-assisted chemical vapor deposition is studied. Argon ion laser and ethylene were used to grow micro carbon rod through pyrolytic decomposition of the reaction gas. The influence of reaction gas pressure and incident laser power on the diameter and growth rate of the micro carbon rod was experimentally investigated. The diameter of micro carbon rods increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below 1W. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 28 ${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated.

• Korean Journal of Mathematics
• /
• v.15 no.2
• /
• pp.101-114
• /
• 2007

For an $m$ by $n$ nonnegative real matrix A, the maximal column rank of A is the maximal number of the columns of A which are linearly independent. In this paper, we analyze relationships between ranks and maximal column ranks of matrices over nonnegative reals. We also characterize the linear operators which preserve the maximal column rank of matrices over nonnegative reals.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.11
• /
• pp.916-921
• /
• 2002

We presents a new method of constructing an equivalent T-S fuzzy model by using the sum of products of linearly independent scalar functions from nonlinear dynamics. This method exactly expresses nonlinear systems and automatically determines the number of rules. We design a stabilizing controller f3r ul inverted pendulum system by using the concep of parallel distributed compensation (PDC) and linear matrix inequalities (LMIs) based on the proposed T-S fuzzy modeling method. We show effectiveness of a systematically designed fuzzy controller based on the proposed T-S fuzzy modeling method through the simulation and experiment of an inverted pendulum system.

• Journal of the military operations research society of Korea
• /
• v.11 no.2
• /
• pp.6-14
• /
• 1985

The layered multi-barrier defense situation against penetrating enemy threat is analytically modeled towards minimizing the penetration probability. Each layer is characterized by probability of detection and probability of kill given detection. The two capabilities are assumed independent. Detection in a layer, however, affects detection performance in subsequent layers. The following three models were formulated and investigated: (1) 'Model A' permits increase of detection performance in only the next barrier, (2) 'Model B' permits the increase in all subsequent barriers linearly, and (3) 'Model C' expresses the increase in an asymptotic exponential way. The best and the worst barrier combinations are determined through model exercise and model performances are compared through sensitivity analysis for the 'intensification factor.'

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.43-48
• /
• 2004

A PWM Circuit using CMOS OTA is proposed. It features that the oscillation frequency is independent of supply voltage and temperature, and is linearly controlled by the bias current of OTA. The H-SPICE simulation results are given and they show good performance of the proposed circuit. The layout results using 0.3${\mu}{\textrm}{m}$ CMOS technology for IC implementation are also given.

• Structural Engineering and Mechanics
• /
• v.64 no.6
• /
• pp.731-736
• /
• 2017

Friction Pendulum isolators are tools developed in the past few decades. The simplest form of these isolators, are FPS whose main disadvantages are having a constant frequency independent of the frequency of the structure. For this reason, researchers have invented VFPI isolator whose frequency is variable and depends on displacement. Another friction pendulum isolator is DCFP isolator which is a combination of two FPS isolators. In this article, first by changing the geometry of DCFP isolator plates from spherical to elliptical, the motion and frequency equations of DVFPI isolators are defined, and then the seismic behavior of DVFPI isolators are analyzed in various geometric and plate friction settings using motion equations, and confirmed using ABAQUS software. The most important results of this study are that the hysteresis behavior of DVFPI isolators are severely nonlinear, its curve follows two distinct curvatures, and that the restoring force is faced with softening mechanism that limits the seismic force transmitted to the structure, whereas the restoring force in DCFP isolators increases linearly with increasing displacement.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2E
• /
• pp.66-71
• /
• 2009

In practical applications of speech recognition, one of the fundamental questions might be on the number of training data that should be provided for a specific task. Though plenty of training data would undoubtedly enhance the system performance, we are then faced with the problem of heavy cost. Therefore, it is of crucial importance to determine the least number of training data that will afford a certain level of accuracy. For this purpose, we investigate the effect of the number of training data on the speaker-independent speech recognition of isolated words by using FVQ/HMM. The result showed that the error rate is roughly inversely proportional to the number of training data and grows linearly with the vocabulary size.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.201-206
• /
• 2004

The linear consecutive-k-out-of-n:F system consists of n components ordered linearly and fails if and only if at least k consecutive components fail. We assume that the failure times of components are independent and identical exponentially distributed. This paper develops a model to calculate the expected cost per unit time of a linear consecutive-k-out-of-n:F system. The optimization problem to find the system structure parameter k to minimize the expected cost per unit time is considered.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.295-299
• /
• 1999

The (S $r_{1-x}$C $a_{x}$)Ti $O_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/ $SiO_2$/ Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mo1%]. The dielectric constant changes almost linearly in temperature ranges of -80~ +90[$^{\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200(kHz).)..

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.328-330
• /
• 2003

A surface equation of state for globular proteins at air-water interface accounting for the molecular structure, segment-segment, segment-solvent, and electrostatic interactions was proposed and compared to C-14 isotope experiments. This lattice model comprised a simplifying assumption that all adsorbed segments are in the form of trains. The number of segment adsorbed per molecule in case of bovine serum albumin linearly depended on the surface concentration whereas the lysozyme segments adsorbed at the interface were independent of surface concentration. The segment-solvent(water) interaction for both of proteins were found to be unfavorable owing to the proteins unfolding. From comparison of model computation and experimental data, BSA unfolded more than lysozyne because of the larger surface area of contact.