• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.171-174
• /
• 2000

This paper presents an approach to determine the vehicle fleet size for container shuttle service in a stochastic working environment. The shuttle service can be defined as the repetitive travel between the designated places during working period. The initial number of vehicles is temporarily calculated using the transportation model. Simulation is carried out in order to investigate dynamic behavior of container shuttle. Finally, the equation for estimating the vehicle fleet size is obtained through the multiple regression model based on simulation results.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.243-247
• /
• 2002

This paper deals with the problem of determining the buyer's economic lot sizing policy for exponentially deteriorating products under trade credit. Assuming that the supplier's credit terms are already known and the length of delay is a function of the buyer's order size, we formulate the mathematical model and the solution algorithm is developed based on the properties of an optimal solution.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.12 no.3
• /
• pp.153-160
• /
• 2008

A size-biased Poisson distribution is defined. Its characterization by using a recurrence relation for first order negative moment of the distribution is obtained. Different estimation methods for the parameter of the model are also discussed. R-Software has been used for making a comparison among the three different estimation methods.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.320-329
• /
• 2021

In this paper, an empirical model of air bubble size to be applied to an air masker for reduction of underwater radiation noise is presented. The proposed model improves the divergence problem under the low-speed flow condition of the existing model derived using Rayleigh's jet instability model and simple continuity condition by introducing a jet flow velocity of air. The jet flow velocity of air is estimated using the bubble size where the liquid is quiescent. In a medium without flow, the size of the bubble is estimated by an empirical method where bubble formation regime is divided into a laminar-flow range, a transition range, and a turbulent-flow range based on the Reynolds number of the injected air. The proposed bubble size model is confirmed to be in good agreement with the Computational Fluid Dynamics (CFD) analysis result and the experimental results of the existing literature. Using the acoustic inversion method, the air bubble population is estimated from the insertion loss measured during the air injection experiment of the air- masker model in a large cavitation tunnel. The results of the experiments and the bubble size model are compared in the paper.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.455-466
• /
• 2017

This study focuses on a method for sequential data augmentation in order to alleviate data sparseness problems. Specifically, we present corpus expansion techniques for enhancing the coverage of a language model. Recent recurrent neural network studies show that a seq2seq model can be applied for addressing language generation issues; it has the ability to generate new sentences from given input sentences. We present a method of corpus expansion using a sentence-chain based seq2seq model. For training the seq2seq model, sentence chains are used as triples. The first two sentences in a triple are used for the encoder of the seq2seq model, while the last sentence becomes a target sequence for the decoder. Using only internal resources, evaluation results show an improvement of approximately 7.6% relative perplexity over a baseline language model of Korean text. Additionally, from a comparison with a previous study, the sentence chain approach reduces the size of the training data by 38.4% while generating 1.4-times the number of n-grams with superior performance for English text.

• Composites Research
• /
• v.31 no.5
• /
• pp.251-259
• /
• 2018

In this paper, statistical volume element modeling method was developed for multi-scale progressive failure analysis of fiber reinforced composite materials. Big-size statistical volume elements (BSVEs) was considered to minimize the size effect in the micro-scale, by including as many fibers as possible. For that purpose, a mesh cutting method is suggested and adapted into the fiber model generator that creates finite element domain rapidly. The fiber defect model was also developed based on the experimental distribution of the fiber strength. The size effects from the local load sharing (LLS) are evaluated by increasing the fiber inclusion in the micro-scale model. Finally, continuum damage mechanics (CDM) model to the fiber direction was extracted from numerical analysis on BSVEs. And it was compared with strength prediction from typical representative volume element (RVE) model.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.35-44
• /
• 2012

In the current maintenance system of building, safety inspection and precise safety diagnosis have been applied only for Type 1 and 2 buildings. Considering the fact that middle and small-size buildings take up 99.4% of total buildings, it is necessary to implement safety diagnosis for the buildings to make long lasting buildings. This study suggested improvement methods for adjusting the existing evaluation items to middle and small-size buildings by reviewing the current diagnosis system and a survey. Based on the methods, an improved model, which modified the existing diagnosis model, was developed by applying fuzzy theory. If the improved model of this study is applied on site, the buildings except Type 1 and 2 could be maintained constantly. In the future studies, it is necessary to implement the developed model practically, to strengthen the feasibility of the model.

• Korean Management Science Review
• /
• v.12 no.1
• /
• pp.51-60
• /
• 1995

This paper presents a workload based model and cell design support system (CDSS) in manufacturing cell design. The proposed model consider manufacturing factor such as machine capacity, production volume, process time, and cell size. Based on those information, workload is calculated and according to the workload, the relationship between machine and part is represented by the workload matrix. To form the manufacturing cell, correlation similarity coefficient (CSC) among machines are calculated and a pair of machines that has the highest value of CSC is assigned to a machine cell. Repeat the above steps until the desired manufacturing cells are obtained. Finally, a cell design support system that could increase the efficiency in the application of a proposed model is developed. The proposed model and CDSS are illustrated by a numerical example.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1015-1025
• /
• 2003

This paper proposes a method for constructing the virtual characters adopting the personal body types for the clothing coordination. At first, the method produces the 38 kinds of the Korean 3D body models considering sex, ages and body types, and constructs model DB. We select a model similar to the personal body size from DB and deform the selected model according to body size. The method deforms the model linearly for height 12 items, width 6 items, depth 5 items and round 13 items, and constructs the personal character fitted to the personal body size. The preprocess for model deformation consists of grouping for body part and establishing the feature points. Linear deformation for each group leads us to easy construction of the virtual personal characters. This method has two advantages as follows: 1. Large reduction of man power, cost and time for DB construction of the body 3D models, since the preprocess permits us to effectively use the various body models whose geometrical structures are different, 2 Suitability to Web-based clothing coordination, since the body deformation method is simple and its speed is very high.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.87-92
• /
• 2003

Progressive mesh representation and generation have become one of the most important issues in network-based computer graphics. However, current researches are mostly focused on triangular mesh models. On the other hand, solid models are widely used in industry and are applied to advanced applications such as product design and virtual assembly. Moreover, as the demand to share and transmit these solid models over the network is emerging, the generation and the transmission of progressive solid models depending on specific engineering needs and purpose are essential. In this paper, we present a Cellular Topology-based approach to generating and transmitting progressive solid models from a feature-based solid model for internet-based design and collaboration. The proposed approach introduces a new scheme for storing and transmitting solid models over the network. The Cellular Topology (CT) approach makes it possible to effectively generate progressive solid models and to efficiently transmit the models over the network with compact model size.