The Transactions of the Korea Information Processing Society
/
v.3
no.4
/
pp.1014-1025
/
1996
The magnetizer that is magnetizing the magnet which is used for RGB (Red Green Blue) control of CRT(Cath-ode-Ray Tube)and the magnet inspection unit which is used for test the state of magnetizing have been imported by magnet manufactures up to now. They are operation by manual now, so that they are needed lots of time and have an increase in probability of malefunction by operator. In this study, we have developed a united system from the magnet production process to inspection ork to automaized a entire progress. Therefor, as we are testing the status of every work and analyzing exactly the distribution in quality with this system, we have known that the reliability of magnetization and magnetized status test has not only increased, but the rate of inferior quality almost not generated.
Journal of Korean Society of Industrial and Systems Engineering
/
v.17
no.30
/
pp.117-123
/
1994
To improve quality of an product We have adopted new approaches such as SPC(Statistical Process Control), CIM(compure Integreated Munufactture), QDF(Quality Development Function), etc. In spite of using these approaches, an organization should fail to achive its true goal if that organization didn't developed its cooperative quality culture which is the total of collective and shared learning of quality-related values as the organization have developed its capacity to survive in its external environment and to manage its own internal affairs. In this paper, I analyzed the current quality culture of Korea Telecom and tried to suggest how Korea Telecom develop its service quality based on the quality culture.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.14
no.6
/
pp.487-496
/
2021
The analysis method of the microbiome has been evolving for a very long time, and the industrial field has grown rapidly with the start of human genome analysis 20 years ago. As continuous research continues, related industries have grown together, and among them, Illumina of the US has been leading the popularization of DNA analysis by developing innovative equipment and analysis methods since its establishment in 1998. In this paper, 'AiB Index', 'AiB Chart' using statistical process control and log-scale technique to analyze the gut microbiome analysis methodology and implement an algorithm that can analyze minute changes in the minor strains that can be overlooked in the existing analysis methods. want to implement. From the data analysis point of view, we proposed a platform for analyzing gut microbes that can collect fecal data, match and process gut microbes, and store and visualize the results.
International Journal of Precision Engineering and Manufacturing-Green Technology
/
v.5
no.5
/
pp.593-604
/
2018
Laser-assisted machining (LAM) is known to be an effective and economical technique for improving the machinability of difficult-to-machine materials. In the LAM method, material is preheated using a laser heat source and then the preheated area is removed by following cutting tool. For laser-assisted turning (LAT), the configuration of the system is not complicated because laser irradiates from a fixed position. In contrast, laser-assisted milling (LAMill) system is not only complicated but also difficult to control because laser heat source must always move ahead of the cutting tool along a three dimensional (3D) tool path. LAMill is still early stage and cannot yet be used to machine finished products with 3D shapes. In this study, a laser-assisted fillet milling process was developed for machining 3D shapes. There are no prior studies combining fillet milling and LAMill. Laser-assisted fillet milling strategy was proposed, and effective depth of cut (EDOC) was obtained using thermal analysis. Experiments were designed using response surface method and cutting force prediction equations were developed using statistical analysis and regression analysis. The optimum machining conditions were also proposed, and energy efficiency of the LAMill was analyzed by comparing the specific cutting energy of conventional machining (CM) and LAMill.
Journal of Korean Society of Industrial and Systems Engineering
/
v.45
no.1
/
pp.31-40
/
2022
Six Sigma is a philosophy and systematic methodology for quality improvement. It encourages continuous quality improvement efforts to achieve the ideal goal of 6σ. Sigma(σ) is a statistic representing the standard deviation of the normal distribution, and 6σ level means a level where the tolerance of the specification is six times the standard deviation of the process distribution. In terms of the defective rate, the 6σ level achieves the 0.002 defectives per one million units. However, in the field, the 6σ level is used in the sense of achieving 3.4 defects per one million opportunities, which shows a large gap from the 6σ level in the statistical viewpoint. This is because field practitioners accept a 1.5σ shift of the mean of process when calculating the defective rate under sigma level. It said that the acceptance of 1.5σ shift of the mean is from experience, but there is no research or theoretical explanation to support it logically. Although it is a non-scientific explanation based on experience, considering that there has been no objection to the 1.5σ shift for a long time and it is rather accepted, it is judged that there is a reasonable basis for the 1.5σ shift. Therefore, this study tries to find a reasonable explanation through detective power of control chart via the run-rules to the 1.5σ shift empirically recognized by practitioners.
Lee, Chang Hee;Yang, Kyung Woo;Park, Doo Il;Kim, S.
Journal of Korean Society for Quality Management
/
v.41
no.3
/
pp.457-463
/
2013
Purpose: For effective quality assurance activities, BOM-based quality assurance method is presented. This study introduces various BOM conversions such as Q-BOM, T-BOM, and S-BOM based on M-BOM structure. Methods: Product quality control via Q-BOM manages inspection/audit information, overall supply-chain of product, part requirements, and inventory status. T-BOM manages part traceability, and S-BOM enables statistical control over key process and parts at various hierarchy levels. Results: Quality plan template was developed based on the study results of BOM system including Q-BOM, T-BOM, and S-BOM. Conclusion: Through BOM(Q-BOM, T-BOM, and S-BOM) study and development of quality plan template, more systematic and comprehensive quality management plan is achieved.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2002.11b
/
pp.869-874
/
2002
Hermetic rotary compressor is one of the most important components for air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration of rotary compressor is occurred due to gas pulsation during compression process and unbalanced dynamic force. In order to reduce noise and vibration, It is necessary to identify sources of noise and vibration and effectively control them. Many approaches have been tried to identify noise sources of compressor. However, compressor noise source identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this work, Statistical Energy Analysis has been used to trace the energy flow in the compressor and identify transmission paths from the noise source to the sound field.
Purpose : To evaluate the cause of internal jugular vein (IJV) obstruction on contrast enhanced 3D MR angiography (CE-MRA) using contrast enhanced computed tomography (CE-CT). Materials and Methods : A total number of 30 patients were enrolled, who underwent both head and neck CE-MRA and CE-CT from 2005 to 2008. We defined obstruction group which had IJV obstruction and control group which had no IJV obstruction on CE-MRA. The following parameters were measured from axial images of CE-CT: 1) diameter of IJV; 2) distance between the styloid process and ipsilateral lateral mass of the atlas; 3) maximum area of lateral mass of the atlas. Each parameter was compared between obstruction group and control group. Results : The diameter of IJV and distance between the styloid process and lateral mass of the atlas at IJV obstruction side in obstruction group were $1.6{\pm}1.0\;mm$ and $4.1{\pm}2.1\;mm$ respectively, which resulted in statistical significance (p<0.01). The maximum area of lateral mass of the atlas at IJV obstruction side in obstruction group was $103.4{\pm}25.3\;mm^2$ which is significantly larger than in control group (p<0.05). Conclusion : We found that the cause of IJV obstruction on CE-MRA could be narrow space between the styloid process and the lateral mass of the atlas, which was related with asymmetric larger area of lateral mass of atlas.
Journal of the Korean Institute of Landscape Architecture
/
v.32
no.4
/
pp.94-104
/
2004
This study creates the LCP (Landscape Control Point) through the survey of spot sites for the quality of landscape assessment, which is based on an objective and departmentalized data base; the landscape assessment was achieved by production of weight value with the AHP (Analytic Hierarchy Process) technique, selection of requisites for the landscape assessment with the IVERSON method and visual area analysis with GIS (Geographic Information System). Futhermore, validity of the landscape assessment was verified by analysis of the correlation between physical amount and aesthetic amount. The purpose of this study is to suggest the basic essential data for landscape assessment and landscape planning by the characteristics of landscape based on verification of the suggested landscape assessment methods. The results of this study are summarized below. 1. In the adaptation of landscape assessment using GIS, the landscape assessment points of LCP 18, 17 and 16, which have more visible elements such as hill area, mountain area, and forest and farm land, were indicated to be higher than the others. In contrast, the landscape assessment points of LCP 13, 6 and 10, which have less visible elements, were relatively lower than the others. 2. In the visible preference measuring method, LCP 4, 14, and 16 showed high points of landscape assessment with 3.46, 3.4, and 3.18 each. With the more natural environments such as hill area, mountain area, and forest and farm land, higher results were shown. In contrast, LCP 7, 1, and 9 showed low points of landscape assessment with 2.24, 2.36, and 2.53 each. 3. In this study, a coefficient of 0.746 was gained by the analysis of correlation between the points of landscape assessment method and the points of visual preference from a slide show. This has 99 percent of probability in statistical data. 4. In conclusion, with the demonstration of the correlation between the landscape assessment method based on the AHP technique and the aesthetic amount (preference proportion), the practical use of landscape assessment can be demonstrated by the suggested landscape assessment method.
The purpose of this study was to investigate the effects of job stress on job satisfaction according to interpersonal relationship type among school dieticians and nutrition teachers. The online survey was conducted from Oct. 26th to Nov. 7th, 2017 in 2,000 randomly selected dieticians and nutrition teachers in the capital area. A total of 453 collected questionnaires were used for analysis. SPSS v.21.0 Statistical Package Program was used for the statistical process. For the results regarding interpersonal relationship type of dieticians, open-type (73.3%) was the highest, followed by self-assertive-type (23.0%), isolated-type (2.6%), and careful-type (1.1%). Regarding overall job satisfaction, 'human relation' was the highest, followed by 'job itself', 'working environment', and 'personal rating & welfare system', in that order. According to interpersonal relationship type, in the case of 'open-type' or 'careful-type', job satisfaction was relatively high. Regarding overall job stress, 'job demand' was the highest, followed by 'lack of reward', 'organizational system', 'interpersonal conflict', 'occupational climate', 'job insecurity', and 'insufficient job control', in that order. In accordance with interpersonal relationship type, overall job stress index was high in terms of 'self-assertive-type' or 'careful-type'. For the results of analyzing the correlation between job satisfaction and job stress index, all areas showed statistically significant negative correlations. Multiple regression analysis was performed to study the effects of job stress on job satisfaction mediating interpersonal relationship type. Job stress had different effects on job satisfaction in terms of 'open-type' and 'self-assertive type'. In conclusion, different strategies are needed for dieticians with different interpersonal relationship types to improve job satisfaction and to reduce job stress.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.