Browse > Article
http://dx.doi.org/10.1007/s40684-018-0061-2

A Study on the Optimum Machining Conditions and Energy Efficiency of a Laser-Assisted Fillet Milling  

Woo, Wan-Sik (School of Mechanical Engineering, Changwon National University)
Lee, Choon-Man (School of Mechanical Engineering, Changwon National University)
Publication Information
International Journal of Precision Engineering and Manufacturing-Green Technology / v.5, no.5, 2018 , pp. 593-604 More about this Journal
Abstract
Laser-assisted machining (LAM) is known to be an effective and economical technique for improving the machinability of difficult-to-machine materials. In the LAM method, material is preheated using a laser heat source and then the preheated area is removed by following cutting tool. For laser-assisted turning (LAT), the configuration of the system is not complicated because laser irradiates from a fixed position. In contrast, laser-assisted milling (LAMill) system is not only complicated but also difficult to control because laser heat source must always move ahead of the cutting tool along a three dimensional (3D) tool path. LAMill is still early stage and cannot yet be used to machine finished products with 3D shapes. In this study, a laser-assisted fillet milling process was developed for machining 3D shapes. There are no prior studies combining fillet milling and LAMill. Laser-assisted fillet milling strategy was proposed, and effective depth of cut (EDOC) was obtained using thermal analysis. Experiments were designed using response surface method and cutting force prediction equations were developed using statistical analysis and regression analysis. The optimum machining conditions were also proposed, and energy efficiency of the LAMill was analyzed by comparing the specific cutting energy of conventional machining (CM) and LAMill.
Keywords
Laser-assisted fillet milling; Thermal analysis; Design of experiment;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Wiedenmann, R. and Zaeh, M. F., "Laser-Assisted Milling-Process Modeling and Experimental Validation," CIRP Journal of Manufacturing Science and Technology, Vol. 8, pp. 70-77, 2015.   DOI
2 Bermingham, M. J., Schaffarzyk, P., Palanisamy, S., and Dargusch, M. S., "Laser-Assisted Milling Strategies with Different Cutting Tool Paths," International Journal of Advanced Manufacturing Technology, Vol. 74, Nos. 9-12, pp. 1487-1494, 2014.   DOI
3 Lee, C. M., Kim, D. H., Baek, J. T., and Kim, E. J., "Laser Assisted Milling Device: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 199-208, 2016.   DOI
4 Kang, D. W. and Lee, C. M., "A Study on the Development of the Laser-Assisted Milling Process and a Related Constitutive Equation for Silicon Nitride," CIRP Annals-Manufacturing Technology, Vol. 63, pp. 109-112, 2014.   DOI
5 Sim, M. S. and Lee, C. M., "Determination of Optimal Laser Power according to the Tool Path Inclination Angle of a Titanium Alloy Workpiece in Laser-Assisted Machining," International Journal of Advanced Manufacturing Technology, Vol. 83, pp. 1717-1724, 2016.   DOI
6 Bermingham, M. J., Kent, D., and Dargusch, M. S., "A New Understanding of the Wear Processes during Laser Assisted Milling 17-4 Precipitation Hardened Stainless Steel," Wear, Vol. 328-329, pp. 518-530, 2015.   DOI
7 Kizaki, T., Ito, Y., Tanabe, S., Kim, Y. J., Sugita, N., et al., "Laser-Assisted Machining of Zirconia Ceramics using a Diamond Bur," Procedia CIRP, Vol. 42, pp. 497-502, 2016.   DOI
8 Ito, Y., Kizaki, T., Shinomoto, R., Ueki, M., Sugita, N., and Mitsuichi, M., "High-Efficiency and Precision Cutting of Glass by Selective Laser-Assisted Milling," Precision Engineering, Vol. 47, pp. 498-507, 2017.   DOI
9 Kim, I. W. and Lee, C. M., "A Study on the Machining Characteristics of Specimens with Spherical Shape Using Laser- Assisted Machining," Applied Thermal Engineering, Vol. 100, pp. 636-645, 2016.   DOI
10 Woo, W. S. and Lee, C. M., "A Study of the Machining Characteristics of AISI 1045 Steel and Inconel 718 with a Cylindrical Shape in Laser-Assisted Milling," Applied Thermal Engineering, Vol. 91, pp. 33-42, 2015.
11 Ding, H., Shen, N., and Shin, Y. C., "Thermal and Mechanical Modeling Analysis of Laser-Assisted Micro-Milling of Difficult-to- Machine Alloys," Journal of Materials Processing Technology, Vol. 212, pp. 601-613, 2012.   DOI
12 Ito, Y., Ueki, M., Kizaki, T., Sugita, N., and Mitsuichi, M., "Precision Cutting of Glass by Laser-Assisted Machining," Procedia Manufacturing, Vol. 7, pp. 240-245, 2016.
13 Kong, X., Yang, L., Zhang, H., Chi, G., and Wang, Y., "Optimization of Surface Roughness in Laser-Assisted Machining of Metal Matrix Composites using Taguchi Method," International Journal of Advanced Manufacturing Technology, Vol. 89, Nos. 1-4, pp. 529-542, 2017.   DOI
14 Kim, D. H. and Lee, C. M., "A Study of Cutting Force and Preheating-Temperature Prediction for Laser-Assisted Milling of Inconel 718 and AISI 1045 Steel," International Journal of Heat and Mass Transfer, Vol. 71, pp. 264-274, 2014.   DOI
15 Cha, N. H., Woo, W. S., and Lee, C. M., "A Study on the Optimum Machining Conditions for Laser-Assisted Turn-Mill," International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 11, pp. 2327-2332, 2015.   DOI
16 Tagliaferri, F., Leopardi, G., Semmler, U., Kuhl, M., and Palumbo, B., "Study of the Influences of Laser Parameters on Laser Assisted Machining Processes," Procedia CIRP, Vol. 8, pp. 170-175, 2013.   DOI
17 Zhu, D., Zhang, R., and Liu, C., "Flow Field Improvement by Optimizing Turning Profile at Electrolyte Inlet in Electrochemical Machining," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 1, pp. 15-22, 2017.   DOI
18 Wang, L. M., Kong, L., Li, J. F., and Chen, Z., "A Parametric and Accurate CAD Model of Flat End Mills Based on Its Grinding Operations," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 10, pp. 1363-1370, 2017.   DOI
19 Dudak, N., Taskarina, A., Kasenov, A., Itybaeva, G., Mussina, Z., et al., "Hole Machining Based on Using an Incisive Built-Up Reamer," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 10, pp. 1425-1432, 2017.   DOI
20 Wang, H., Zhou, M. X., Zheng, W. Z., Shi, Z. B., and Li, H. W., "3D Machining Allowance Analysis Method for the Large Thin- Walled Aerospace Component," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 3, pp. 399-406, 2017.   DOI
21 Chen, B., Li, S. C., Deng, Z. H., Guo, B., and Zhao, Q. L., "Grinding Marks on Ultra-Precision Grinding Spherical and Aspheric Surfaces," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 4, pp. 419-429, 2017.   DOI
22 Islam, Md. M., Li, C. P., and Ko, T. J., "Dry Electrical Discharge Machining for Deburring Drilled Holes in CFRP Composite," International Journal of Precision Engineering and Manufacturing- Green Technology, Vol. 4, No. 2, pp. 149-154, 2017.   DOI
23 Pereira, O., Rodriguez, A., Barreiro, J., Fernandez-Abia, A., and De Lacalle, L. L., "Nozzle Design for Combined Use of MQL and Cryogenic Gas in Machining," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 1, pp. 87-95, 2017.   DOI
24 Faga, M. G., Priarone, P. C., Robiglio, M., Settineri, L., and Tebaldo, V., "Technological and Sustainability Implications of Dry, Near-Dry, and Wet Turning of Ti-6Al-4V Alloy," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 2, pp. 129-139, 2017.   DOI
25 Chu, W. S., Kim, M. S., Jang, K. H., Song, J. H., Rodrigue, H., et al., "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 2, pp. 209-222, 2016.   DOI
26 Lee, Y. K., Seo, Y. J., Lee, H. J., and Jeong, H. D., "Effect of Diluted Colloidal Silica Slurry Mixed with Ceria Abrasives on CMP Characteristic," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, pp. 13-17, 2016.   DOI
27 Kim, I. W. and Lee, C. M., "Investigation into the Machining Characteristics of AISI 1045 Steel and Inconel 718 for an Ellipsoidal Shape using Laser-Assisted Contouring and Ramping Machining," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 9, pp. 1231-1238, 2017.   DOI
28 Jang, D. K., Jung, J. H., and Seok, J. W., "Modeling and Parameter Optimization for Cutting Energy Reduction in MQL Milling Process," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, pp. 5-12, 2016.   DOI
29 Park, K. H., Suhaimi, M. A., Yang, G. D., Lee, D. Y., Lee, S. W., et al., "Milling of Titanium Alloy with Cryogenic Cooling and Minimum Quantity Lubrication (MQL)," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 1, pp. 5-14, 2017.   DOI
30 Liao, Y. S., Liao, C. H., and Lin, H. M., "Study of Oil-Water Ratio and Flow Rate of MQL Fluid in High Speed Milling of Inconel 718," International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 2, pp. 257-262, 2017.   DOI
31 Oh, H. S., Cho, H. R., Park, H. N., Hong, S. T., and Chun, D. M., "Study of Electrically-Assisted Indentation for Surface Texturing," International Journal of Precision Engineering and Manufacturing- Green Technology, Vol. 3, No. 2, pp. 161-165, 2016.   DOI
32 Lee, C. M., Woo, W. S., Kim, D. H., Oh, W. J., and Oh, N. S., "Laser-Assisted Hybrid Processes: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 2, pp. 257-267, 2016.   DOI
33 Lee, C. M., Woo, W. S., Baek, J. T., and Kim, E. J., "Laser and Arc Manufacturing Processes: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 7, pp. 973-985, 2016.   DOI
34 Panjehpour, A., Soleymani Yazdi, M. R., and Shoja-Razavi, R., "An Experimental Investigation of Pulsed Laser-Assisted Machining of AISI 52100 Steel," Optics & Laser Technology, Vol. 63, pp. 137-143, 2014.   DOI
35 Roostaei, H. and Movahhedy, M. R., "Analysis of Heat Transfer in Laser Assisted Machining of Slip Cast Fused Silica Ceramics," Procedia CIRP, Vol. 46, pp. 571-574, 2016.   DOI
36 Przestacki, D., Szymanski, P., and Wojciechowski, S., "Formation of Surface Layer in Metal Matrix Composite A359/20SiCP during Laser Assisted Turning," Composites: Part A, Vol. 91, pp. 370-379, 2016.   DOI
37 Brecher, C., Rosen, C. J., and Emonts, M., "Laser-Assisted Milling of Advanced Materials," Physics Procedia, Vol. 5, pp. 259-272, 2010.   DOI
38 Tadavani, S. A., Razavi, R. S., and Vafaei, R., "Pulsed Laser- Assisted Machining of Inconel 718 Superalloy," Optics & Laser Technology, Vol. 87, pp. 72-78, 2017.   DOI