• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.108-111
• /
• 2009

In this paper, the development of unmanned vehicle systems to analysis applicable communications and alternative IEEE 802.11a. IEEE 802.11b/g uses the 2.4GHz. So, using the 5GHz OFDM in IEEE 802.11a interference phenomenon better. IEEE 802.11a has a maximum speed of 54Mbps. Indoors and apartment parking on experiment to soft roaming, hard roaming. Test equipments are AP four units(RSU), reliable results for the AP one unit Bridge, Switch one unit, one server notebook, one notebook(OBU), one car. Use Softwares are Wireshark, Jperf, Ping and million second transfer was used to develop the program. So the actual car was similar to the environment. With the results of the experiment for the unmanned vehicle systems will provide the best method.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.87-91
• /
• 2006

With the growth of the internet, the number of wireless internet users has increased continuously up to date. However, mobile communications could not support high speed transmission rate with cheap communication fee and wireless LAN has problems in providing terminal mobility and wide area connectivity, respectively. So the WMAN standard has been newly designed to make up for these limits. The initial 802.16 specification effectively offers a solution for providing fixed users with high speed wireless communication but it does not offer terminal mobility. So the 802.16d and 802.16e have been developed as the next generation solution that can support various PHY layer (SC, SCa, OFDM, OFDMA) and offer the terminal mobility. In this paper, we propose an effective uplink scheduling algorithm for VoIP with using UGS, and we show that our proposed algorithm is superior in view of average delay and management of uplink bandwidth to conventional rtPS algorithm and the scheme in reference, with using NS-2 network simulator.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.3-12
• /
• 2013

Wireless Sensor Network (WSN) is used in the railway field in terms of efficient management and maintenance. Sensor communication technology based on IEEE 802.15.4/ZigBee is used in low speed train. However, it is difficult to apply in the high speed train that exposed to severe wireless channel environments. In this paper, we propose the sensor communication algorithm for high speed train environment. we improve error rate and throughput using Equalizer, Multiple Input Multiple Output (MIMO), Flexible Spreading Factor (SF) and Modulation. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee based on the standard of physical layer of 2.4GHz band in each algorithms. Simulation results show that proposed algorithms can improve error rate and throughput of conventional system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1768-1773
• /
• 2005

The IEEE 802.1x standard provides an architectural framework which can be used various authentication methods. But, IEEE 802.1x also has vulnerabilities about the DoS, the session hijacking and the Man in the Middle attack due to the absence of AP authentication. In this paper, we propose a WLAN secure system which can offer a robust secure communication and a user authentications with the IEEE 802.1x framework. The user authentication on the WLAN secure system accomplishes mutual authentications between authentication severs, clients and the AP using PKI and prevents an illegal user from intervening in communication to disguise oneself as a client, the AP or authentication servers. Also, we guarantee the safety of the communication by doing secure communication between clients and the AP by the Dynamic WEP key distribution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.18-26
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n wireless LAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. From fixed-point modeling and Matlab simulations for various bit-widths, decoding performance and optimal hardware parameters such as fixed-point bit-width are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.18-${\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1355-1362
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. Our LDPC decoder adopts a block-serial architecture based on min-sum algorithm and layered decoding scheme. A novel way to store check-node values and parity check matrix reduces the sizes of check-node memory and H-ROM. An efficient scheme for check-node memory addressing is used to achieve stall-free read/write operations. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.132-135
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.35-42
• /
• 2011

WPAN(Wireless Personal Area Network) have many advantages such as using low power and cheap price, small size. So it is recently increasing application range such as personal portable device, home network and sensor network so and on. IEEE 802.15.3 basically has the point to point or peer to peer UM(Usage Model). But using devises that need data transmission is increasing in the house and office. Therefor UM of point to multipoint is proposed. In this paper, I proposed Multicast ACK mechanism on the point to multipoint UM. So it is able to transfer data to multiple devices as this Multicast transfer method at a time. Thus, throughput performance is improved. But the problem that increases data transfer delay is appeared because of adding Multicast ACK traffic. We compared the performance between standard and proposed mechanism through a numerical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.844-851
• /
• 2004

Various types of error are caused due to many factors of various environment in air interface channel of wireless communications. In this case, the reliability of the channel is much lower than that of wired case. IEEE 802.15.3 high-rate WPAN, which operates in an ad hoc networking environment, is more susceptible to such errors. The problem has been investigated for wireless LANs, for example, as follows. If the queue size of a certain node is longer than that of other nodes, the node estimates that its channel state is bad and the resource of the node is decreased. However this method has a disadvantage that a central controller must always monitor the status. To avoid this disadvantage, in this paper, a new MAC protocol that the throughput of overall piconet is increased by LDS (Link-status Dependent Scheduling) is proposed.