• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.727-735
• /
• 2009

To alleviate positioning error using wireless ultra-wideband (UWB) is primary concern, and it has been studied how to reduce the positioning error effectively. Thanks to many repeated transmissions of UWB signals, we can have a variety of selections to point out the most precise positioning result. Towards this, scanning method has been preferred to be used due to its simplicity. This exhaustive method firstly fixes the candidate position, and calculates the sum of distances from observed positions. However, it has tremendous number of computations, and the complexity is more serious if the size of two-dimensional range is the larger. To mitigate the large number of computations, this paper proposes the technique employing genetic algorithm and block windowing. To exploit its superiority, simulations will be conducted to show the reduction of complexity, and the efficiency on positioning capability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2011

In this paper, we expect that the IEEE 802.15.4a, which is based on CSS, will be used a lot without getting help from other systems or sensors and will make it possible to measure the distance between radio chips in sensor network field, where the location information of the standard have to be based upon. But, the error rate will be high, so we will correct the location of the tag, which will be received by anchor. The technology of location correction we offer is reducing the error rate through calculating the distance from Compensation Tag, and after that, unite the Toa method with the Fingerprint method and adapt them to location correction technology, calculate the location's estimate, and finally abstract the best suited location estimate for Compensation Tag. At last, we offer developing systems as indoor systems of CSS, which pursue the location between nodes, and a thesis about indoor systems and making their accuracy higher.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.265-269
• /
• 2008

Home health care with compact wearable units sounds to be a convenient solution for the elderly people living independently. This paper presents a method to detect fall from the other activities of daily living and also to classify those activities. This kind of ambulatory monitoring enables them to get an emergency help in the case of the fatal fall event and can provide their general health status by observing the activities being performed in daily life. A tri-axial accelerometer sensor is used to get the acceleration anomalies associated with the user's movements. The three axis acceleration data are transferred to the base station sensor node via an IEEE 802.15.4 compliant zigbee module. The base station sensor node sends the data to base station PC for an offline processing. This work shows the feature set preparation using the principal component analysis (PCA) for the designing of neural network. The work includes the most common activities of daily living (ADL) like Rest, Walk and Run along with the detection of fall events from ADL. The angle from the vertical is found to be the most significant feature parameter for classification of fall while mean, standard deviation and FFT coefficients were used as the feature parameter for classifying the other activities under consideration. The accuracy for detection of fall events is 86%. The overall accuracy for ADL and fall is 94%.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.729-732
• /
• 2008

Complexity and Massive is the modem trend of construction project. The lack of timely and accurate construction data is the main cause for the lack productivity increases seen in other industries. Because information is essential in the construction production process, the lack of it will cause workers to stay idle, build the wrong thing that has to be redone, become involved in an accident or simply waste their time doing non-productive work. To aid construction automation and improve its productivity, RFID technology system should be developed. As a result of that, this study analyzes the status of RFID technologies in construction project and suggest advanced construction method. USN and RTLS system is analyzed in this study RFID system also can be used in construction management, material management, quality control, safety management and human resource management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.777-785
• /
• 2009

In recent wireless sensor networks, stationary nodes and mobile nodes co-exist to provide a diverse service. However, because there are multiple mobile nodes located in the wireless sensor network, there is a potential for the instability due to the frequent network reconfiguration and the traffic caused by densely concentration of mobile nodes while mobile nodes are switching locations. In order to solve this problem, we propose the pumping node architecture to solve this traffic congestion problem due to the crowds of mobile nodes. The pumping node can be reduced heavy traffic by pumping through the backbone network caused by the densely concentration of the mobile nodes. As a result, the architecture reduces the traffic in the sensor network with high reliability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.426-429
• /
• 2006

A distributed healthcare monitoring system prototype for clinical and trauma patients, was developed, using wireless sensor network node. The proposed system aimed to measure various vital physiological health parameters like ECG and body temperature of patients and elderly persons and transfer his/ her health status wirelessly in Ad-hoc network, to remote base station which was connected to doctor's PDA/PC or to a hospital's main Server using wireless sensor node. The system also aims to save the cost of healthcare facility for patients and the operating power of the system because sensor network is deployed widely and the distance from sensor to base station was shorter than in general centralized system. The wireless data communication will follow IEEE 802.15.4 frequency communication with ad-hoc routing thus enabling every motes attached to patients, to form a wireless data network to send data to base-station, providing mobility and convenience to the users in home environment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.121-128
• /
• 2018

Internet of Things architecture connected to the Internet is a technology. However, Many paper research for the lightweight Protocol of IoT Environment. In these Paper excluded secure problem about protocol. So Light weight Protocol has weakness of secure in IoT environment. All of IoT devices need encryption algorithm and authentication message code for certain level of security. However, IoT environment is difficult to using existing security technology. For this reason, Studies for Lightweight IPsec is essential in IoT environment. For Study of Lightweight IPsec, We analyze existing protocols such as IPsec, 6LoWPAN for IEEE 802.15.4 layer and Lightweight IPsec based 6LoWPAN. The result is to be obtained for the lightweight IPsec protocols for IoT environment. This protocol can compatible with Internet network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.431-436
• /
• 2009

Home network is a rapidly growing area as new technologies are emerging, and new applications are being developed. The progress of home network technologies is growing the home network management technology for control and management of the digital appliances. Embodiment of these home network show marked ich have use for complicated and diversifiable processing. Design of home network system does very important stage through home network comes essential pars. In this paper, We designed and constitute Home network system which designs module using embedded system, STR710F Chip and CC2420 RF Module-Chip with the intention for using RS232C and USB.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.10
• /
• pp.259-268
• /
• 2018

Due to the development of cities and the increase of vehicles, effective control of parking space management service in cities is needed. However, the existing parking lot management system does not provide limited or convenient service in terms of space and time. In this paper, we propose distributed parking space management service based on large scale LPWA (Low-Power Wide-Area). The parking sensor collects parking space information from the parking lot and is transmitted over a low-power wide network. All parking data is processed and analyzed in the IoT cloud. Through a parking space management service system in all cities, users are given the temporal convenience of determining the parking space and the area efficiency of the parking space.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.306-313
• /
• 2013

In this paper, we implemented the matching system between user-centered ubiquitous virtual reality and the real world for smart home control. Implemented system consists of the smart devices that are equipped with the ubiquitous virtual reality, the hardware for a real-world representation, and the matching software. To communication and data control, we designed the TCP/IP communication protocol, and used the WPAN-based 802.15.4 ZigBee module. The main point of proposed the authoring tool-based ubiquitous virtual reality is the user-centered environment that users can place the objects such as smart TV, home appliances similar to embellish their home structure. Some experiments are conducted so as to verify the proposed model, and as a results, the proposed matching system is well performed.