• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.216-222
• /
• 1996

This paper presents a computational technique to predict roof crush resistance in early design stage of passenger car development. This technique use a simple F.E. model with nonlinear spring elements which represent plastic hinge behavior at weak areas. By assuming actual sections as equivalent simple sections, maximum bending moments which weak areas in major members can stand are theoretically calculated. Results from prediction of roof crush resistance are correlated well with test results.

• 임상간호연구
• /
• 제23권1호
• /
• pp.30-39
• /
• 2017

Purpose: The aim of this study was to evaluate the effects of favorite music therapy on the stress response of hysterectomy patients undergoing general anesthesia. Methods: Date were collected from June 29, 2015 to January 18, 2016 and the participants were 79 hysterectomy patients (experimental group 40 and control group 39). The experimental group listened to their favorite music through earphones from the moment they entered the surgical waiting room until they exited from the post anesthesia care unit. Results: There were statistically significant differences in anxiety (F=15.92, p<.001), systolic blood pressure (F=4.23, p=.008), diastolic blood pressure (F=3.07, p=.033), and heart rate (F=19.93, p<.001) between participants in the experimental group and the control group according to measurement times. Conclusion: The study results show that favorite music therapy considering patients' preferences is effective in reducing anxiety among patients undergoing a hysterectomy under general anesthesia, thus leading to a stable change in their blood pressure and heart rate.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.595-609
• /
• 2022

Prestressed composite steel-concrete beams are still a technology restricted to repair sites of large-scale structures and spans. One of the reasons for that is the absence of standard frameworks and publications regarding their design and implementation. In addition, the primary normative codes do not address this subject directly, which might be related to a scarcity of papers indicating methods of design that would align the two technics, composite beams and external prestressing. In this context, this paper proposes methods to analyze the sizing of prestressed composite beams submitted to pre-tension and post-tension with a straight or polynomial layout cable. This inquiry inspected a hundred and twenty models of prestressed composite beams according to its prestressing technology and the eccentricity and value of the prestressing force. The evaluation also included the ratio between span and height of the steel profile, thickness and typology of the concrete slab, and layout of the prestressing cables. As for the results, it was observed that the eccentricity of the prestressing force doesn't significantly influence the bending resistance. In prestressed composite beams subjected to a sagging moment, the ratio L/d can reach 35 and 30 for steel-concrete composite slabs and solid concrete slabs, respectively. Considering the negative bending moment resistance, the value of the L/d ratio must be less than or equal to 25, regardless of the type of slab. When it comes to the value of the prestressing force, a variation greater than 10% causes a 2.6% increase in the positive bending moment resistance and a 4% decrease in the negative bending moment resistance. The pre-tensioned composite beams showed a superior response to flexural-compression and excessive compression limit states than the post-tensioned ones.

• 한국작물학회지
• /
• 제11권
• /
• pp.105-117
• /
• 1972

본연구는 맥류의 도복에 관여하는 주요형질의 상호관계를 구명함과 아울러 주요 대소맥 품종의 내도복성정도를 분류하고, 내도복성 품종 선발의 기준을 인정하여 보고자 한 것이며, 그 결과를 요약하면 다음과 같다. 1. 포장도복과 도복지수는 고도의 정의 상관(대맥 r=0.44-0.67 소맥 r=0.46-0.68)이 있으며 지상부 Bending moment에 간자체의 정도를 가미한 지수로서 도복저항성 검정에 가장 유효하다. 2. 간의 Bending stiffness를 표시하는 좌절시 Bending moment와 단면 2차 moment와는 정의 높은 상관(대백 r=0.59, 소맥 r=0.46-0.53)을 보였다. 3. 간의 Bending stiffness(좌절시 Bending moment 단면 2차 moment)와 간에의 건물집적량을 표시하는 단위간건물중과는 높은 정의 상관 (대맥 r=0.35-1.40, 소맥 r=0.33-0.76)을 보였다. 4. 도복지수와 단위간건물중 (대맥 r=-0.51～-0.70, 소맥 r=-0.65～-0.83) 좌절시 Bending moment (대맥 r=-0.29～-0.69, 소맥 r=-0.54～-0.89)과는 특히 높은 부의 상관을 보였으며, 소맥의 경우는 좌절하중, 단면 2차 moment, 단면계수와는 높은 부의 상관을 보였다. 5. 간외경은 간내경보다 간의 물리적 특성과 상관이 높으며 좌절하중 (대맥 r=0.42-0.56, 소맥 r=0.39-0.44), 좌절시 Bending moment (대맥 r=0.40-0.41, 소맥 r=0.38-0.49), 단면 2차 moment (대맥 r=0.56-0.97, 소맥 r=0.0.28-0.28), 단면계수(소맥 r=0.22-0.96)와는 정의 높은 상관이 있었고, 간벽후와 물리적특성과도 정의 상관을 보였다. 6. 간장은 포장도복과는 품종군에 따라서는 정의 상관은 보이나, 간의 강도를 고려한다면 내도복저항성품종 선발의 지표로서 이용하기는 어려울 것으로 보인다. 7. 대소맥의 많은 품종의 내도복성 정도를 분류한 결과, 한국품종중 대맥은 내도복저항성품종이 많고, 대맥은 내도복성인 품종의 분포가 대맥보다 적었으나, 일본품종들을 대소맥 모두 내도복저항성인 품종이 많았다. 8. 내도복저항성인 품종의 선발을 위하여는 도복지수가 대맥 1.67 소맥 1.76 정도 이하인 것은 고도의 저항성이 있었다.

• Steel and Composite Structures
• /
• 제23권4호
• /
• pp.465-472
• /
• 2017

This paper presents an experimental study, investigating the compressive behavior of glass-fibre reinforced and unreinforced cementitious material-filled square steel tubular (GFCMFST and CMFST) columns. The specimens were manufactured by using high performance cementitious materials without using coarse aggregate. The influence of adding glass-fibres to the mix on the behavior of both axially and eccentrically loaded columns is considered. It was found that adding glass fibre improvesthe confinement behavior, the axial compressive strength, the stiffness and the toughness of both axially and eccentrically loaded columns. The compressive strength of axially loaded columns is compared with strength predictions according to EC4 and the AISC specification. It was found that the design predictions according to EC4 and the AISC codes provide conservative results for CMFST and GFCMFST columns. Alternatively, the axial load-bending moment interaction diagrams specified in theEC4 are conservative for the eccentrically tubular CMFST and GFCMFST tested columns.

• 대한치과교정학회지
• /
• 제31권3호
• /
• pp.325-333
• /
• 2001

바람직한 교정치료는 최적의 교정력을 치아에 가하여 정확하게 치아이동을 조절하고 예측함에 따라 가능해진다. 치관에 힘과 모멘트가 동시에 적용될 때 그 비율(M/F ratio)에 따라 치주인대에 나타나는 응력 분포가 변화하게 되고 이에 따른 회전중심의 위치가 변하게 되는데 이런 양상을 파악함으로써 정확한 치아이동을 조절하고 예측할 수 있다. 본 연구에서는 교정력에 따른 치주인대 및 치조골 부위에서의 응력 분포를 알아보기 위하여 상악 중절치 치근 8부위에 스트레인 게이지를 부착한 인공 치아를 광탄성 레진에 매식한 4mm 정중이개 증례의 상악 전치부 실험모형을 제작하여 응력 분포를 조사하였다. 폐쇄 방법으로 다음과 같은 3가지 방법을 적용하였다. 1. 금속 호선의 삽입 없이 100g의 힘을 발휘하는 elastomeric chain만 사용한 경우, 2. .016" 금속호선을 삽입하고 elastomeric chain을 사용한 경우, 3. .016“x.022” 금속호선을 삽입하고 elastomeric chain을 사용한 경우. 각각의 경우에서 치근의 근심면, 원심면 및 순면, 설면에 나타나는 응력을 계측하여 비교 분석한 결과 다음과 같은 결론을 얻었다. 1. 치근 부착 스트레인 게이지를 이용한 응력 분포 조사 방법으로 치아이동시 치근의 근 원심면 및 순 설면에서의 응력 분포를 파악할 수 있었으며 이에 따른 모멘트 팔의 형성을 추정함으로써 치아의 회전양상을 알 수 있었다. 2. 호선없이 교정력을 적용한 경우 정출 및 경사이동이 컸으며 호선 적용에 따라 압하 및 치체이동 양상을 보이는 것을 응력 분포 파악을 통해 확인할 수 있었다.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.111-115
• /
• 2014

X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) were used to investigate the influence of Ni ions on the structural, electronic, and magnetic properties of nickel-ferrites ($Ni_xFe_{3-x}O_4$). Spinel $Ni_xFe_{3-x}O_4$ ($x{\leq}0.96$) samples were prepared as polycrystalline thin films on $Al_2O_3$ (0001) substrates, using a sol-gel method. XRD patterns of the nickel-ferrites indicate that as the Ni composition increases (x > 0.3), a structural phase transition takes place from cubic to tetragonal lattice. The XPS results imply that the Ni ions in $Ni_xFe_{3-x}O_4$ substitute for the octahedral sites of the spinel lattice, mostly with the ionic valence of +2. The minority-spin d-electrons of the $Ni^{2+}$ ions are mainly distributed below the Fermi level ($E_F$), at around 3 eV; while those of the $Fe^{2+}$ ions are distributed closer to $E_F$ (~1 eV below $E_F$). The magnetic hysteresis curves of the $Ni_xFe_{3-x}O_4$ films measured by VSM show that as x increases, the saturation magnetization ($M_s$) linearly decreases. The decreasing trend is primarily attributable to the decrease in net spin magnetic moment, by the $Ni^{2+}$ ($2{\mu}_B$) substitution for octahedral $Fe^{2+}$ ($4{\mu}_B$) site.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.46-50
• /
• 2010

In the superconducting $Sr_2VO_3FeAs$, containing bimetallic layers, with maximum $T_c{\approx}\;46\;K$ correlation effects on V ions have been investigated using LDA+U method. Within the local density approximation (LDA) this system has the one-third filled $t_{2g}$ manifold of V, decomposed into $d_{xy}$ of bandwidth W=2 eV and nearly degenerate $d_{zx}d_{yz}$ of W=1 eV. Consideration of correlation effects leads to a metal-insulator transition on V ions $t^{2\uparrow}_{2g}\;{\rightarrow}\;d^{1\uparrow}_{xz}\;d^{1\uparrow}_{yz}$ at the critical on-site Coulomb repulsion $U_c$= 3.5 eV. At U=4 eV, the electronic structure, in which V ions are insulating, leads to several van Hove singularities near $E_F$ and similar Fermiology with other pnictides. Applying U to V ions results in increasing Fe moment as well as V moment, indicating somewhat hybridization between Fe and V ions even though this system is strongly 2-dimesional. Our results show possible importance of correlation effects on this system.

• 한국강구조학회 논문집
• /
• 제22권5호
• /
• pp.497-509
• /
• 2010

고강도강재 및 고강도콘크리트를 적용한 매입형 합성기둥의 편심압축시 거동특성을 연구하기 위하여, 항복강도 $f_{ys}$=913MPa 강재와 압축강도 $f_{ck}$97.7MPa 콘크리트를 사용하여 실험연구를 실시하였다. 주요변수는 횡철근의 종류, 항복강도, 배근간격, 그리고 편심하중거리이다. 거동특성을 분석하기 위하여 구속효과와 변형률적합조건을 적용한 비선형 단면해석을 실시하였으며, 현행 설계기준들의 적용성을 판단하기 위해 실험결과와 비교하였다. 횡구속효과에 의하여 콘크리트의 연성능력은 증가하였으며, 이에 따라 단면의 휨모멘트강도가 증가하였다. 비선형해석을 통해 합성단면의 축력-모멘트 상관관계를 예측한 결과는 실험결과와 잘 일치한 반면, 강재의 완전소성강도를 사용하는 Eurocode 4는 실험체의 성능을 과대평가하였으며, 콘크리트의 횡구속효과를 고려하지 않은 ACI 318은 과소평가하였다.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.198-208
• /
• 2015

Objective: To quantify, for each activation, the effect of preactivations of differing distribution and intensity on the neutral position of T-loops (7-mm height), specifically the horizontal force, moment to force (M/F) ratio, and load to deflection ratio. Methods: A total 100 loops measuring $0.017{\times}0.025$ inches in cross-section were divided into two groups (n = 50 each) according to composition, either stainless steel or beta-titanium. The two groups were further divided into five subgroups, 10 loops each, corresponding to the five preactivations tested: preactivations with occlusal distribution ($0^{\circ}$, $20^{\circ}$, and $40^{\circ}$), gingival distribution ($20^{\circ}$), and occlusal-gingival distribution ($40^{\circ}$). The loops were subjected to a total activation of 6-mm with 0.5-mm iterations. Statistical analysis was performed using comprised ANOVA and Bonferoni multiple comparison tests, with a significance level of 5%. Results: The location and intensity of preactivation influenced the force intensity. For the M/F ratio, the highest value achieved without preactivation was lower than the height of the loop. Without preactivation, the M/F ratio increased with activation, while the opposite effect was observed with preactivation. The increase in the M/F ratio was greater when the preactivation distribution was partially or fully gingival. Conclusions: Depending on the preactivation distribution, displacement of uprights is higher or lower than the activation, which is a factor to consider in clinical practice.