• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.279-288
• /
• 2019

The groundwater drawdown at each monitoring well near a radial collector well along Anseong Stream, Korea, was measured and compared with the calculated drawdown using the mirror well concept. The drawdown calculation is performed by treating the collector well as a large vertical well in a homogeneous isotropic aquifer. The measured drawdown at each monitoring well is slightly different from the calculated value due to anisotropy in the hydraulic conductivity and aquifer thickness. The difference between the measured and calculated values at Well OW-7 is large, reaching approximately 48 cm, because a horizontal well is not installed along this direction. Sensitivity analysis of the hydraulic conductivity and aquifer thickness indicates that the hydraulic conductivity is more sensitive to groundwater level changes. Groundwater level changes become a concern when a radial collector well with a large pumping rate capacity is installed, which highlights the need to thoroughly investigate the aquifer characteristics in the surrounding area.

• Clinical and Experimental Reproductive Medicine
• /
• v.45 no.3
• /
• pp.122-128
• /
• 2018

Objective: To determine whether fragment removal on in vitro fertilization (IVF) day 2 improved the subsequent development and pregnancy outcomes of fragmented embryos compared to similar-grade embryos without fragment removal. Methods: This study was a retrospective analysis involving 191 IVF cycles in which all embryos had over 10% fragmentation (grade 3 or 4) on day 2 of the IVF-embryo transfer cycle from March 2015 to December 2017. IVF cycles were divided into the fragment removal group (n = 87) and the no fragment removal group (n = 104) as a control cohort. Before fragment removal, embryos with fragmentation on day 2 were incubated in $Ca^{2+}$- and $Mg^{2+}$-free biopsy medium under paraffin oil for 30 minutes. Microsurgical fragment removal was performed with later-assisted hatching and a handmade suction micropipette that had an outer diameter of $30{\mu}m$. Results: There were no significant differences in the characteristics of the patients between the control and the fragment removal groups. After fragment removal and subsequent in vitro culture for 24 hours, the number of blastomeres ($7.1{\pm}1.7$ vs. $6.9{\pm}1.6$) was comparable between the transferred embryos in the two groups, but the morphological grade of the embryos in the fragment removal group ($1.9{\pm}0.7$) was significantly higher than that of the control group ($3.1{\pm}0.5$, p< 0.01). The clinical pregnancy (43.7%) and implantation rates (25.8%) in the fragment removal group were significantly higher than those in the control group (28.8% and 14.0%, respectively; p< 0.05). Conclusion: Early fragment removal on day 2 significantly improved the subsequent development and pregnancy outcomes of fragmented embryos.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.27 no.1
• /
• pp.120-139
• /
• 2014

Objectives: The tendency of experimental studies on the male infertility was analyzed through focusing on domestic theses for a degree to indicate the hereafter direction for its study in oriental herbal medicine. Methods: 35 domestic theses for a degree published after 2003 were analyzed. And theses were classified by year, study design, degree and subjects. Results: The followings are the results of this study. 1. 35 theses were reviewed. 11 master dissertations and 24 doctorate dissertations 2. In the annual publishing tendency, the number of theses began to increase from 2003 and the theses have been published actively from 2005. 3. Classified by study design, 19 in vitro & in vivo and 16 in vitro experimental studies were performed. 4. In the medication and prescription, the studies with single medication were 32, and prescription were 3. In the studies with single medication, four studies on Ginseng Radix (人蔘) were the most. 5. In theses related to single medication, BoYang-Yak was most prefered, followed BoYeum-Yak, BoKi-Yak, SabJung-ChukNyo-JiDae-Yak. 6. Analysed 35 theses by subject, concentrational experiments were 23, periodical experiment were 3, concentrational & periodical experiment was 1. 7. In theses related to herb medication, the themes were Body & testicular weight, sperm parameters, testosterone level, CREM mRNA level & CREM protein, seminiferous tubule and antioxidant activity. 8. Related to herb medication's antioxidant activity efficacy were 7 theses. Conclusions: If there are more diverse studies on medication, prescription, external treatment methods and experiment methods in the future, this will be very helpful for the clinical treatment of male infertility.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.106-110
• /
• 2004

The objective of this study was carried out to investigate nutritional characteristics and biological activities effects of Korean leaf of Rosa davurica Pall. in vitro. They were extracted with methanol and then further fractionated to n-hexane, chloroform, ethyl-acetate, n-butanol and water from methanol extracts. Methods of the antigenotoxic used in this experiment were UVA/UVB absorption property and DPPH radical scavenge. The proximate compositions of leaves of Rosa dauvrica Pall were 67.5％ of crude Moisture, 0.7％ of crude fat, 6.8％ of crude protein, 6.1％ of crude ash, and 20.8％ of crude fiber. The major minerals were K (1637.2 mg％), Ca (219.5 mg％), P (182.1 mg％), and Mg (135.1 mg％). Most of the fractions of methanol extract which leaves of Rosa dauvrica Pall. have strong absorbency at UVB region (308 nm) and UV A region (350nm). These fractions have a good absorbency property as synthetic filter and could be served as substitutes for synthetic UV sunscreen agents. All fractions (n-hexane, ethyl-acetate, n-butanol and water) from methanol extracts except chloroform fraction exhibited DPPH radical scavenging activity with IC$\_$50/ of 35.3, 6.0, 14.0, and 18.0 $\mu\textrm{g}$/mL.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.599-603
• /
• 2009

To evaluate the anti-tumor activity of Flammulina velutipes extract, we used an in vitro wound-healing assay, and an in vivo approach using a mouse melanoma model. Wound-healing activity in B16 cells was affected by the extract in a dose-dependent manner, indicating that the extract had anti-metastatic activity. The extract also exhibited strong anti-tumor activity against lung cancer when B16 cells were injected into mouse veins together with B16 melanoma cells. The results indicatethat the Flammulina velutipes extract decreased B16 cancer cell growth by inhibition of cell migration both in vitro and in vivo.

• YAKHAK HOEJI
• /
• v.50 no.4
• /
• pp.272-277
• /
• 2006

This study was undertaken to determine whether the 9 herbal complex induces apoptosis in human breast cancer MCF-7 cells and adriamycin-resistant MCF7/adR cells. Ethanol extracts of Bojungbangamtang (BBTE) and acidic polysaccharide of Red Ginseng (GIN) induced cell death in both MCF-7 and MCF7/adR cells. Ethanol extracts of Bojungbangamtang and acidic polysaccharide of Red Ginseng also induced $G_2/M$ cell cycle arrest and increased TUNEL positive cells in MCF7/adR cells. In addition, flow cytometric analysis revealed the decreased expression of P-glycoprotein (P-gp) in ethanol extracts of Bojungbangamtang and acidic polysaccharide of Red Ginseng treated MCF7/adR cells. Similarly, decreased protein levels of P-glycoprotein and multidrug resistance associated proteins-1 were also determined by immunocytometry in ethanol extracts of Bojungbangamtang treated MCF7/adR cells. Taken together these data indicate that ethanol extracts of Bojungbangamtang and acidic polysaccharide of Red Ginseng inhibit the function of ABC transporters such as multi drug resistance associated proteins (MRPs) and P-glycoprotein as well as induce apoptosis in MCF7/adR cells. Thus, these data suggest that ethanol extracts of Bojungbangamtang and polysaccharide of Red Ginseng can be candidates for the treatment of multidrug-resistant MCF7/adR cells.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.275-281
• /
• 2009

Sesame oils are partially mixed with other vegetable oils due to high price in a Korean market. To find out authentic sesame oil, a mass spectrometer-based electronic nose (MS-based E-nose) was used. Sesame oil (Se) was blended with soybean oil (So) or corn oil (Co) at the ratio (Se:So, Se:Co) of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by MS-based E-nose were completely different from those of soybean oil or corn oil. The obtained results were used for discriminant function analysis (DFA). Volatile organic components (VOC) of soybean oil or corn oil were similar to those of fresh air and DFA plot indicated a significant separation of pure sesame oil and pure other oil. The group of the mixed oil was seperated with that of sesame oil in DFA plot and the added amount of soybean oil to sesame oil was correlated with discriminant function first score (DF1). MS based E-nose system could be used as an efficient method to investigate the purity of sesame oil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.230-236
• /
• 2018

Earthquakes over 5.0 on the Richter scale have recently occurred in Korea, which has led to interest in the seismic safety of structures. If a water storage facility is damaged by an earthquake, the water could leak, and the insufficient water would make fire suppression difficult. Therefore, a water storage facility should satisfy safety requirements for earthquakes. In this study, the seismic performance of a water tank was improved by installing a lead rubber bearing between the foundation and the tank. It designed the lead rubber bearing available to the existed concrete foundation. ANSYS was used for modeling to consider the interaction between the fluid and structure of the tank and the hydrostatic and hydrodynamic pressure using four seismic waves. In the case of hydrostatic pressure at 2.5 water level, full level, the same stress appeared irrespective of whether the seismic isolation was installed. When hydrostatic pressure and hydrodynamic pressures are applied at the same time, the seismic-isolated water tank showed less seismic force, and the damping ratio was lower than that of general seismic isolation. This occurred because the weight of the water tank is much smaller than the stiffness of the seismic isolation. The result is expected to be used for further research on seismic capacity evaluation for water tanks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.4
• /
• pp.382-388
• /
• 2019

Streptococcosis caused by Streptococcus parauberis is a very important disease in farmed olive flounder Paralichthys olivaceus. For most fish pathogens, including S. parauberis, there are no analytical criteria to distinguish antibioticsusceptible strains from antibiotic-resistant strains. In this study, epidemiological cut-off ($CO_{WT}$) values were generated to classify 75 strains of S. parauberis isolated from 1999 to 2018 as wild type (WT) and non-wild type (NWT) using disc diffusion data and normalized resistance interpretation (NRI) analysis. The susceptibility of the isolates to 16 antibiotics was evaluated using CLSI guideline M42-A. The wild-type cut-off values for amoxicillin, erythromycin, oxytetracycline, and florfenicol for S. parauberis were ${\geq}35$, 31, 28, and 27 mm, respectively. The NWT ratios of S. parauberis strains to treatment with GEN, FFC, ENR, SXT, EFT, VAN, and CHL were 17% or less, indicating that these antibiotics may be used to treat streptococcosis caused by S. parauberis. For recent S. parauberis isolates, the NWT ratios for AMX, ERY, OTC and FFC are much higher than for strains isolated from 1999-2007. The $CO_{WT}$ data from this study will assist aquatic animal disease professionals in prescribing appropriate antibiotics for the treatment of streptococcosis caused by S. parauberis, which will help reduce the misuse and abuse of antibiotics in the aquaculture sector.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.663-670
• /
• 2018

H13 tool steels are widely used as metallic mold materials due to their high hardness and thermal stability. Recently, many studies are undertaken to satisfy the demands for manufacturing the complex shape of the mold using a 3D printing technique. It is reported that the mechanical properties of 3D printed materials are lower than those of commercial forged alloys owing to micropores. In this study, we investigate the effect of microstructures and defects on mechanical properties in the 3D printed H13 tool steels. H13 tool steel is fabricated using a selective laser melting(SLM) process with a scan speed of 200 mm/s and a layer thickness of $25{\mu}m$. Microstructures are observed and porosities are measured by optical and scanning electron microscopy in the X-, Y-, and Z-directions with various the build heights. Tiny keyhole type pores are observed with a porosity of 0.4 %, which shows the lowest porosity in the center region. The measured Vickers hardness is around 550 HV and the yield and tensile strength are 1400 and 1700 MPa, respectively. The tensile properties are predicted using two empirical equations through the measured values of the Vickers hardness. The prediction of tensile strength has high accuracy with the experimental data of the 3D printed H13 tool steel. The effects of porosities and unmelted powders on mechanical properties are also elucidated by the metallic fractography analysis to understand tensile and fracture behavior.