• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.328-332
• /
• 2003

Ceramics of xCaTiO$_3$-(1-x)Li$_{0.5}$Nd$_{0.5}$TiO$_3$(xCT-(1-x)LNT) series have been prepared by the mixed oxide route. Powders were calcined at 110$0^{\circ}C$ ; cylindrical specimens were fired at temperatures in the range 1300-150$0^{\circ}C$. Sintered products were typically 90-95% dense. The microstructures were dominated by angular grains typically 1.3${\mu}{\textrm}{m}$ to 3.5 ${\mu}{\textrm}{m}$ in size. Twinning in the microstructures was analysed using Electron Back Scattered Diffraction (EBSD). Microwave dielectric properties of xCT-(1-x)LNT at 2.1 GHz ($\varepsilon$$_{r}$, Qxf, and $\tau$r) were 170,3800 GHz and 744 ppm/$^{\circ}C$ for pure CaTiO$_3$ and 80,2000 GHz and -240 ppm/$^{\circ}C$ for LNT. The $\tau$r decreases almost linearly from 744 for pure CaTiO$_3$ to -240 for pure LNT.LNT.T.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.701-708
• /
• 2016

A new design for an ultra-wideband microstrip-to-FGCPW(Finite Ground Coplanar Waveguide) transition is presented. The proposed transition provides the electric field and impedance matching between adjacent transmission lines by ground shaping. The transition is designed on the analytical expressions of whole transitional structure. Conformal mapping is applied to obtain the characteristic impedance of FGCPW with bottom aperture within 3.3 % accuracy as compared with the EM-simulation results. As design example, the fabricated transition in back-to-back configuration provides insertion loss less than 1 dB per transition and return loss better than 10 dB for frequencies from 9 GHz to over 40 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.125-135
• /
• 2001

A 8$\times$4 microstrip antenna array is designed at 5.3 GHz and its characteristics are investigated with respect to the application in dual polarized synthetic aperture radars. The design is focused on the achievement of a wide bandwidth, a high polarization purity, a low loss, a good isolation and some mechanical requirements suitable for the application. The antenna is fed by a -3 dB tapered feed network, and is composed of dual polarized SSFIP (Strip-Slot-Foam-Inverted Patch) elements with honeycomb and shielding plane. Simulation results for the antenna array are presented and compared with measurements. It is observed that the antenna shows a bandwidth of 80 MHz, a polarization isolation better than 20 dB, an isolation of 40 dB, and good mechanical characteristics.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.92-95
• /
• 2000

본 논문에서 항만 자동게이트통관시스템에 사용하기 위하여 단거리전용통신(DSRC)용 OBE에 사용되는 5.8㎓ 송신기 MMIC를 설계하였다. 능동소자로는 GaAs MESFET을 사용하였고, 회로의 복잡도를 줄이기 위해 직접변조방식을 채택하였다. 인접채널간섭의 영향을 줄이기 위하여 드레인 재어 변조회로를 사용하여 -40dBc이하의 인접채널간섭과 70dB 이상의 on/off비를 갖는 5.8㎓ ASK송신기 회로를 설계하였다.

• 정보화사회
• /
• s.151
• /
• pp.62-67
• /
• 2001

정부는 오는 2005년까지 현재 40GHz대역까지 실용화된 전파자원을 80GHz대역까지 개발해 초고속 구내무선통신, 차량 충돌방지서비스 등 신규 광대역 서비스에 활용토록 할 계획이다.또 민.관 합동으로 450억원을 투자, 무궁화위성에 탑재할 중계기.안테나 등 통신방송 위성 탑재체를 산.학.연 공동으로 독자 개발키로 했다.정보통신부는 지난 7월11일 귀중한 국가자원인 주파수를 효율적으로 관리하고 관련 산업을 육성하기 위해 이 길은 내용의 전파산업진흥 기본계획을 확정, 발표했다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.220-224
• /
• 2000

AlGaAs/GaAs HBT를 이용하여 1.9 GHz 대역 2단 MMIC 전력증폭기를 설계하였다. HBT의 실측 S 파라미터를 이용하여 정합회로를 설계하였으며, 목적에 따라 적절한 형태의 출력 정합 회로를 하이브리드 형태로 칩 외부에 부가할 수 있도록 설계하였다. HBT의 실측정 S 파라미터의 fitting을 통하여 비선형 등가모델을 추출하였고, load-pull 시뮬레이션으로 최대 출력 정합 임피던스를 결정하였다. 시뮬레이션 결과, 29 dBm의 출력 전력, 40 %의 전력 부가 효율, 그리고 16 dB의 전력 이득을 얻었다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.147-151
• /
• 2002

We fabricated and characterized a millimeter-wave ceramic package in a frequency range from 6 to 40㎓ using the LTCC(Low Temperature Cofired Ceramic) Technology and TRL(Thru-Reflect-Line) calibration method. From these measurement results, the fabricated feed-through structure achieved 0.5 dB, 14 dB of the insertion loss and the return loss at 30 GHz respectively. This ceramic package will be useful for MMIC(Monolithic Microwave Integrated Circuit) modules.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.1
• /
• pp.27-32
• /
• 2003

Highly reproducible side-wall process for the fabrication of the fine gate length as small as 40nm was developed. This process was utilized to fabricate 40nm InGaAs HEMTs with the 65% strained channel. With the usage of the dual $SiO_2$ and $SiN_x$ dielectric layers and the proper selection of the etching gas, the final gate length (Lg) was insensitive to the process conditions such as the dielectric over-etching time. From the microwave measurement up to 40GHz, extrapolated fT and fmax as high as 371 and 345 GHz were obtained, respectively. We believe that the developed side-wall process would be directly applicable to finer gate fabrication, if the initial line length is lessened below the l00nm range.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.54.1-54.1
• /
• 2015

We report results of investigation of amplitude calibration for very long baseline interferometry (VLBI) observations with Korean VLBI Network (KVN). Amplitude correction factors are estimated based on comparison of KVN observations at 22 GHz correlated by Daejeon hardware correlator and DiFX software correlator in Korea Astronomy and Space Science Institue (KASI) with Very Long Baseline Array (VLBA) observations at 22 GHz by DiFX software correlator in National Radio Astronomy Observatory (NRAO). We used the observations for compact radio sources, 3C 454.3 and NRAO 512 which are almost unresolved for baselines in a range of 350-477 km. VLBA visibility data of the sources observed with similar baselines as KVN are selected, fringe-fitted, calibrated, and compared in their amplitudes. We found that visibility amplitudes of KVN observations should be corrected by factors of 1.14 and 1.40 when correlated by DiFX and Daejeon correlators, respectively. These correction factors are attributed to the combination of two steps of 2-bit quantization in KVN observing systems and characteristics of Daejeon correlator.