• Journal of Advanced Marine Engineering and Technology
• /
• 제40권7호
• /
• pp.599-604
• /
• 2016

음극방식은 19세기 초에 해수 및 지중 금속의 부식을 억제시키기 위한 기술로 처음 소개되었으며, 1970년대에 철근콘크리트 분야에 음극방식 기술이 적용되기 시작하였다. 1990년대에는 국제적으로 많은 연구 및 기술개발로 인하여 철근 부식방지의 효용성이 널리 증명되었다. 국내에도 최근 철근콘크리트 분야에 음극방식이 소개되어 일부 구조물에 적용되기 시작하고 있으며 점차 그 범위가 확대되고 있다. 음극방식의 특징은 일반 콘크리트구조물의 물리적인 보수 유지와는 달리 전기화학적 원리를 응용한 방식기술이기 때문에 다소의 전문적인 지식이 필요하다. 따라서 본 연구에서는 철근콘크리트의 방식기술, 음극방식의 원리, 설계, 적용 등의 기본적인 이론과 철근콘크리트의 음극방식 기준 및 음극방식을 철근콘크리트구조물에 적용할 때의 기술적인 내용 및 적용사례를 소개한다.

• 대한한방내과학회지
• /
• 제40권4호
• /
• pp.597-611
• /
• 2019

Objective: The goals of this study were to analyze each of the reasons adopted by the Constitutional Court or the Courts for Decisions determined to permit the use of medical devices by Korean medicine doctors and to look at the medical devices from a Korean medical perspective. Materials and Methods: For this study, several judicial precedent databases were used for searching judicial precedents that handle the usage of medical devices by Korean medicine doctors. Prior studies on similar issues were considered. The Korean medicine textbooks and related research studies were also used in this study. Results: From 2000 to 2018, a large number of lawsuits were filed regarding the legality of Korean medicine doctors using medical devices; approximately 20 final judgments or decisions were made. Among them, only two cases determined that Korean medicine doctors could legally use medical devices. Conclusion: The decisions in both cases could be interpreted as the judgments that Korean medicine doctors were allowed to use a medical device whose use or operating principles were commonly incorporated with Korean medical principles. That was provided that training was sufficient in the use of the medical device, to the extent that it could be used and that such use of the medical device was not feared to pose a health hazard.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate the principles and motions for increasing the jumping height of Fosbury Flop. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. The horizontal velocity of approach run and decreasing of this velocity during the take off phase were increased as the jumping height was increased. Therefore, in order to increase the jumping height, the horizontal velocity of approachrun should be increased and decreased properly during the take-off phase. The average height of the analyzed Dials was 2.15m. The average horizontal velocity of approachrun was 7.49m/s and decreased to 4.16m/s at the instance of take-off. 2. The vertical velocity of the center of gravity was increased as the ascending height of the center of gravity during the take-off phase was increased. Therefore, the center of gravity at the instant of touch down should be lowered. This could be possible by increasing the length of the last stride and the backward lean angle of the body. The average length of the last stride was 111.1% of the standing height, the average height of the center of gravity was 46.6% of the standing height and the average backward lean angle of the body was 40.3 degrees.

• 대한인간공학회지
• /
• 제33권3호
• /
• pp.229-239
• /
• 2014

Objective: This research provides a guideline for working area design in the electronic industry, considering gender differences of physical characteristics. Background: Co-work in the electronic industry requires workers of various physical properties to work cohesively in the conveyor line for mass production. This stresses the need for a worker-centered design of the workplace convenient for all the workers. Method: In this research, the $6^{th}$ Size Korea (National Anthropometric Survey in Korea) report is referred to obtain the design measurements according to age and gender varieties. This information is used to provide the working area guideline concerning conveyor line workers of both genders aged 20 to 40. Results: Physical properties of workers and workplace design principles were obtained for application in the assembly, inspection, and material handling process in the electronic industry. Conclusion: Applying ergonomic design principles can provide safe and comfortable workplace for both genders. Application: This research can be fundamentally used in designing worker-centered workplaces.

• 대한가정학회지
• /
• 제40권7호
• /
• pp.193-210
• /
• 2002

The purpose of this study is to identify the characteristics of physical setting of adult day care as a place for the elders and adult and to develop an basic understanding of the architectural program and physical setting for adult day care for the cognitively-impaired in the U.S.A. The data was collected from 13 Adult Day Care Centers(ADCC) from 2001 to 2002 by interview and the documents about those facilities. Physical environment should be viewed as an element in the care of individuals with dementia, and that the principles used to plan and design environment should be consistent with the principles used in providing other aspects of care. The results of the study provided the information about the best condition of physical setting of ADCC for the elderly with dementia. Memory Loss Adult Day Center and St. Ann Center for Intergenerational Care have better architectural program than other facilities. It is the hope of this study to provide guideline for design and care professionals with a first draft of a "sense-making" template and to slow own the progression of the disease by the appropriate physical environment.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.29-40
• /
• 2017

This work employed density functional theory to investigate the structural and ferroelectric properties of the Ruddlesden-Popper (RP) phase of lead titanate, $Pb_2TiO_4$, as well as its phase transitions with epitaxial strain. A wealth of novel structural instabilities, which are absent in the host $PbTiO_3$ material, were identified in the RP phase through phonon soft-mode analysis. Our calculations showed that the ground state of $Pb_2TiO_4$ is antiferroelectric, distinct from the dominant ferroelectric phase in the corresponding host material. In addition, applied epitaxial strain was found to play a key role in the interactions among the instabilities. The induction of a sequence of antiferroelectric and antiferrodistortive (AFD) phase transitions by epitaxial strain was demonstrated, in which the ferroic instability and AFD distortion were cooperative rather than competitive, as is the case in the host $PbTiO_3$. The RP phase in conjunction with strain engineering thus represents a new approach to creating ferroic orders and modifying the interplay among structural instabilities in the same constituent materials, enabling us to tailor the functionality of perovskite oxides for novel device applications.

• 공학교육연구
• /
• 제25권6호
• /
• pp.23-37
• /
• 2022

This study evaluated the engineering students' ethical sensitivity to an AI emotion recognition robot scenario and explored its characteristics. For data collection, 54 students (27 majoring in Convergence Electronic Engineering and 27 majoring in Computer Software) were asked to list five factors regarding the AI robot scenario. For the analysis of ethical sensitivity, it was checked whether the students acknowledged the AI ethical principles in the AI robot scenario, such as safety, controllability, fairness, accountability, and transparency. We also categorized students' levels as either informed or naive based on whether or not they infer specific situations and diverse outcomes and feel a responsibility to take action as engineers. As a result, 40.0% of students' responses contained the AI ethical principles. These include safety 57.1%, controllability 10.7%, fairness 20.5%, accountability 11.6%, and transparency 0.0%. More students demonstrated ethical sensitivity at a naive level (76.8%) rather than at the informed level (23.2%). This study has implications for presenting an ethical sensitivity evaluation tool that can be utilized professionally in educational fields and applying it to engineering students to illustrate specific cases with varying levels of ethical sensitivity.

• Architectural research
• /
• 제15권2호
• /
• pp.77-86
• /
• 2013

Cohousing is based on collaborative network, or fictive kin in the community. It could facilitate the goal of self-sufficiency. This research aims to investigate the motivation of move to cohousing communities in Sweden, and to find out if there are any significant differences according to two different cohousing types; between the +40 cohousing and the mixed-age cohousing. The +40 cohousing is a kind of senior cohousing in which residents are supposed to be aged over 40. Questionnaire survey was applied and 242 collected data were analyzed by SPSS statistical program. Notable differences in demographic and dwelling variables are found between the 2 groups. There are more women, singles, academics, and small dwellings in the +40 cohousing than in the mixed-age cohousing. Referring motivation of move, "sharing common activity" and "idea of cohousing" are commonly noticed as the main reasons why people move to cohousing communities. Major difference between the 2 groups is that residents of the +40 cohousing tend to stress more on social interaction with neighbors than practical merit. On the contrary, ones of the mixed-age cohousing focus more on practical advantage than social interaction. As a conclusion, it is evident that motivation of move to cohousing communities is different by cohousing types, which have different residents' characteristics. Cohousing could contribute to elevate marginal group's quality of life as an alternative living environment. Therefore, cohousing design has to be tailored to adapt residents' specific needs of different life-stages. In order to implement cohousing model into other countries, for instance into Korea, it needs to experiment with the notion of transplanting selected cohousing principles to a public housing development. In the mixed-age cohousing where more dual income families with young children than conventional housing developments reside, residents would need more practical advantage than emotional support in the community, while as residents in the senior cohousing need vice versa.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.94-100
• /
• 2021

멤브레인(membrane) LNG 운반선 화물창(cargo containment) 공사의 생산성 향상을 위해서는 공사 작업대인 비계 시스템(scaffolding system)의 설치 기간 및 공정 단축이 요구된다. 이를 위한 효과적인 방안으로 모듈의 탑재 단위를 기존의 2단에서 8단으로 대형화하자는 의견이 수렴되고 있다. 하지만, 모듈의 대형화로 인해 탑재 하중이 증가하면 메인 수직 파이프를 연결해주는 핀(pin)과 홀(hole) 주위에 국부 응력이 증가하여 재료의 항복응력을 초과하게 되는 문제점이 발생한다. 본 연구의 목적은 이러한 문제점을 해결하기 위해 트리즈(TRIZ)를 도입하여 새로운 대형 모듈의 탑재 방안을 수립하는 것이다. 본 연구에서는 트리즈의 여러가지 문제해결 도구 중 하나인 40가지 발명원리를 활용하는 방안을 채택하였다. 먼저 기술적 모순을 도출하고, 공학변수를 선정하였으며, 모순행렬을 활용하여 기술적 모순을 극복하기 위한 효율적인 발명원리를 선정하였다. 선정된 발명원리를 통해 일반해결안 및 특정해결안을 도출하였고, 구조해석을 통해 구조물에 발생하는 응력이 낮은 수준임을 확인하였다. 수립된 탑재 방안을 적용한 대형 모듈의 실제 탑재에 성공함으로써 트리즈의 유용성을 확인하였다.

• 영재교육연구
• /
• 제25권5호
• /
• pp.731-747
• /
• 2015

본 연구는 창조의 시대를 맞아 발명영재 학생의 창의력을 신장하기 위한 역공학 교육방법을 활용한 RSP 발명영재교육 프로그램을 개발하고, 이를 적용해 효과를 검증하는 것을 목적으로 하며, 'RSP 발명영재교육 프로그램'을 발명교육 현장에 적용하여 본 프로그램이 발명영재 학생의 창의적 사고 기능 및 학업수행 자기효능감에 미치는 영향에 대해 알아봄으로써 RSP 발명 영재교육 프로그램의 현장 적용 가능성을 밝히고자 하였다. 그 결과, 본 연구에서 개발한 발명 영재 학생을 위한 RSP 발명영재교육 프로그램은 프로그램의 목적과 목표, 내용, 교수-학습 방법, 평가가 연계성 있게 구성되어 발명영재의 창의적 사고 기능 및 학업수행 자기효능감 증진에 효과적임을 알 수 있었다. 본 연구는 TRIZ의 발명원리를 기초로 역공학 교육방법을 활용한 RSP를 적용하여 프로그램을 개발하고 실제 현장에 적용하였으므로 향후 발명영재교육 프로그램 개발을 위한 기초자료로 활용 가치가 있을 것이며, 발명영재교육의 구체적인 실천 프로그램으로 현장에서의 활용성과 효율성이 높을 것으로 기대한다.