• 제목/요약/키워드: 4-ball test

검색결과 293건 처리시간 0.023초

Copy-milled Celay In-Ceram 전부도재관의 파절강도에 관한 연구 (A STUDY ON FRACTURE STRENGTH OF CONVENTIONAL AND COPY-MILLED IN-CERAM CROWNS)

  • 황정원;양재호;이선형;정헌영
    • 대한치과보철학회지
    • /
    • 제35권2호
    • /
    • pp.417-430
    • /
    • 1997
  • The purpose of this study was to compare the fracture resistance of copy-milled and conventional In-Ceram crown. Four groups of ten uniform sized all-ceramic crowns were fabricated. In-Ceram Spinell and In-Ceram Alumina crowns were fabricated as control group, Celay In-Ceram Spinell and Celay In-Ceram Alumina crowns were fabricated as test group. All specimen were cemented on stainless steel master die with resin cement, and stored in $37^{\circ}C$ water for 1 day prior to loading in Instron testing machine. Using a steel ball at a crosshead surfed of 0.5mm/min, the crowns were loaded at $30^{\circ}C$ angle until catastrophic failure occurred. The results obtained were as follows : 1. With the value of $984.8N{\pm}103.67N$, the strength of Celay In-Ceram Alumina crowns had a significantly higher fracture strength than conventional In-Ceram Alumina crowns ($876.2N{\pm}92.20N$) (P<0.05) 2. The fracture strength of Celay In-Ceram Spinell crowns($706.3{\pm}70.59N$) was greater than that of conventional In-Ceram Spinell crowns($687.4{\pm}90.26N$), but there was no significant difference(P>0.05). 3. The In-Ceram Alumina crowns had a significantly higher fracture strength than In-Ceram Spinell crowns in both methods(P<0.05). 4. Ther order of fracture strength was as followed : Celay In-Ceram Alumina, In-Ceram Alumina, Celay In-Ceram Spinell and In-Ceram Spinell crowns

  • PDF

불안정한 면에서의 체간 훈련이 뇌졸중 환자의 비례추진력에 미치는 영향 (Effect of Trunk Control Training on Labile Surface on Relative Impulse in the Persons with Stroke)

  • 장상훈;안지현;김진상
    • The Journal of Korean Physical Therapy
    • /
    • 제24권2호
    • /
    • pp.163-169
    • /
    • 2012
  • Purpose: The present study was designed to investigate the effect of trunk control training on the labile surface on relative impulse and balance in stroke patients. Methods: A total of 21 participants were assigned to an experimental group (n=11) or a control group (n=10). In addition to conventional therapy, the experimental group received trunk control training on the swiss ball; 20 minutes, 4 times a week, for 8 weeks. Balance ability was evaluated by FRT (functional reaching test) and TUG (time up and go). In addition relative impulse in 6 areas of the foot (hallux, 1st metatarsal head, 2~3 metatasal head, 4~5 metatasal head, mid foot and heel) were measured using the F-scan system to evaluate locomotion ability during gait. Results: Significant differences in the relative impulse were observed in the areas of the 2~3 metatasal head during gait after exercise in both the control group and experimental group (p<0.05). Also, a significant increase was seen in the hallux after exercise in the experimental group (p<0.05), but no such significant increase was seen in the control group (p>0.05). Significant differences were observed in FRT and TUG in the experimental group but no such significant increase was observed in the control group (p>0.05). Conclusion: These results suggest that trunk control training on labile surface improves the balance in stroke patients and has a positive effect on locomotion ability.

조간대 지역에서의 고해상 탄성파 탐사를 위한 파원 특성 분석 (Analysis of source characteristics for high-resolution seismic surveys on a tidal flat)

  • 홍종국;김기영;김한준
    • 지구물리
    • /
    • 제2권2호
    • /
    • pp.100-110
    • /
    • 1999
  • 조간대 지역의 고해상 반사법 탐사에 적합한 탄성파 파원을 밝히기 위하여, 이동식 진동기, 1.2 kg 스패너, 4.7 kg 해머, 30 kg과 100 kg 중력추 등 모두 5 종류의 파원을 워커웨이 방식으로 시험하여 파원의 특성을 구명하였다. 원시자료 및 고주파 통과필터 적용 후의 자료를 이용하여 파원에 따른 탄성파 이벤트들의 수직분해능을 분석하였으며, 고해상 탄성파 탐사에 적합한 파원을 결정하기 위하여 파원별로 발생에너지 및 주파수 성분의 변화를 비교하였다. 분석결과에 의하면 20-30 m 정도의 천부 지층을 상세하게 구명하기 위해서는 주파수 대역이 가장 넓고 고주파 성분을 많이 발생시키는 이동식 진동기가 가장 적합한 것으로 나타난다. 반면 대상심도가 100 m 까지 증가하는 경우, 해머가 효과적인 파원으로 사용될 수 있을 것으로 분석된다.

  • PDF

후막 센서 어레이를 이용한 화학 작용제 분류 (Classification of Chemical Warfare Agents Using Thick Film Gas Sensor Array)

  • 곽준혁;최낙진;반태현;임연태;김재창;허증수;이덕동
    • 한국군사과학기술학회지
    • /
    • 제7권2호
    • /
    • pp.81-87
    • /
    • 2004
  • Semiconductor thick film gas sensors based on tin oxide are fabricated and their gas response characteristics are examined for four simulant gases of chemical warfare agent (CWA)s. The sensing materials are prepared in three different sets. 1) The Pt or Pd $(1,\;2,\;3\;wt.\%)$ as catalyst is impregnated in the base material of $SnO_2$ by impregnation method.2) $Al_2O_3\;(0,\;4,\;12,\;20\;wt.\%),\;In_2O_3\;(1,\;2,\;3\;wt.\%),\;WO_3\;(1,\;2,\;3\;wt.\%),\;TiO_2\;(3,\;5,\;10\;wt.\%)$ or $SiO_2\;(3,\;5,\;10\;wt.\%)$ is added to $SnO_2$ by physical ball milling process. 3) ZnO $(1,\;2,\;3,\;4,\;5\;wt.\%)$ or $ZrO_2\;(1,\;3,\;5\;wt.\%)$ is added to $SnO_2$ by co-precipitation method. Surface morphology, particle size, and specific surface area of fabricated sensing films are performed by the SEM, XRD and BET respectively. Response characteristics are examined for simulant gases with temperature in the range 200 to $400^{\circ}C$, with different gas concentrations. These sensors have high sensitivities more than $50\%$ at 500ppb concentration for test gases and also have shown good repetition tests. Four sensing materials are selected with good sensitivity and stability and are fabricated as a sensor array A sensor array Identities among the four simulant gases through the principal component analysis (PCA). High sensitivity is acquired by using the semiconductor thick film gas sensors and four CWA gases are classified by using a sensor array through PCA.

저/고분자량 키토산에 의한 종래형 치과용 글라스아이오노머 시멘트의 강화 (Strengthening of conventional dental glass ionomer cement by addition of chitosan powders with low or high molecular weight)

  • 김동애;김규리;전수경;이정환;이해형
    • 대한치과재료학회지
    • /
    • 제44권1호
    • /
    • pp.69-77
    • /
    • 2017
  • The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

Color alterations of a PMMA resin for fixed interim prostheses reinforced with silica nanoparticles

  • Kotanidis, Alexandros;Kontonasaki, Eleana;Koidis, Petros
    • The Journal of Advanced Prosthodontics
    • /
    • 제11권4호
    • /
    • pp.193-201
    • /
    • 2019
  • PURPOSE. The aim of the present study was to evaluate the color changes of an autopolymerizing PMMA resin used for interim fixed restorations, reinforced with $SiO_2$ nanoparticles. MATERIALS AND METHODS. Silica nanoparticles were blended with the PMMA resin powder through high-energy ball milling. Four shades of PMMA resin were used (A3, B3, C3, D3) and total color differences were calculated through the equations ${\Delta}E_{ab}=[({\Delta}L*)^2+({\Delta}a*)^2+({\Delta}b*)^2]^{1/2}$ and ${\Delta}E_{00}=[(\frac{{\Delta}L^{\prime}}{K_LS_L})^2+(\frac{{\Delta}C^{\prime}}{K_CS_C})^2+(\frac{{\Delta}H^{\prime}}{K_HS_H})^2+R_T(\frac{{\Delta}C^{\prime}}{K_CS_C})(\frac{{\Delta}H^{\prime}}{K_HS_H})]^{1/2}$. Statistically significant differences between ${\Delta}E_{ab}$ and the clinically acceptable values of 3.3 and 2.7 and those between ${\Delta}E_{00}$ and the clinically acceptable value of 1.8 were evaluated with one sample t-test (P<.05). Differences among the different shades were assessed through One-Way ANOVA and Bonferroni multiple comparison tests. RESULTS. Significantly lower values were detected for all groups concerning ${\Delta}E_{ab}$ compared to the intraorally clinical acceptable values of 3.3 and 2.7. Significantly lower mean values were detected for groups B3, C3, and D3, concerning ${\Delta}E_{00}$ compared to the intraorally clinical acceptant value of 1.8. Color pigments in red-brown (A3) and red-grey (D3) shades affect the total color change to a greater extent after the reinforcement with $SiO_2$ nanoparticles compared to the red-yellow (B3) shade. CONCLUSION. Within the limitations of this in vitro study, it can be suggested that reinforcing PMMA with $SiO_2$ nanoparticles at 0.25 wt% slightly affects the optical properties of the PMMA resin without being clinically perceivable.

이중과제운동이 뇌졸중 환자의 호흡과 균형 및 일상생활활동에 미치는 영향 (Effects of Dual-Task Exercise on Breathing, Balance, and Activity of Daily Living in Stroke Patients)

  • 최현;문영준;백승윤
    • 대한물리의학회지
    • /
    • 제19권2호
    • /
    • pp.91-98
    • /
    • 2024
  • PURPOSE: This study aimed to provide basic clinical data by investigating the impact of Activities of daily living-related dual-task intervention on lung function, balance, and Activities of daily living of stroke patients. METHODS: After sampling 40 stroke patients who met the selection criteria, this study randomly assigned 20 patients who received dual-task exercise intervention to the experimental group and 20 patients who received single exercise intervention to the control group by drawing lots. Next, the study pre-tested their lung function, balance, and activity of daily living. All interventions were conducted for 30 minutes, 3 times a week for 4 weeks, and when all interventions were completed after 4 weeks, lung function, balance, and activity of daily living were re-measured in the same way as the pre-test. RESULTS: In comparing changes in lung function, balance, and activity of daily living within each of the experimental and control groups, statistically significant improvement were found in the experimental group only (p < .01). Statistically significant improvement were also found in lung function, balance, and activities of daily living between the groups (p < .05) (p < .01). CONCLUSION: A statistically significant improvements were found in lung function, balance, and activities of daily living only in the experimental group and statistically significant differences were found between groups. Because they take arm exercises by maintaining balance in a standing position on a labile surface and through dual-task exercise such as folding a towel, moving a cup, and throwing and catching a ball, muscles related to lung function were stimulated and lung function and balance were improved. This helped activities of daily living to be improved. Thus, it is considered that dual-task exercise should be utilized for stroke patients' smooth everyday life.

Sn-58Bi Solder와 OSP 표면 처리된 PCB의 접합강도에 미치는 시효처리와 에폭시의 영향 (Effect of Aging treatment and Epoxy on Bonding Strength of Sn-58Bi solder and OSP-finished PCB)

  • 김정수;명우람;정승부
    • 마이크로전자및패키징학회지
    • /
    • 제21권4호
    • /
    • pp.97-103
    • /
    • 2014
  • 다양한 무연솔더합금 가운데 Sn-58Bi solder는 저융점이며 상대적으로 높은 인장강도를 갖고 있지만 취성적이라는 단점을 갖고 있다. 이러한 Sn-58Bi 솔더의 기계적 강도를 보완하기 위해 epoxy를 함유한 Sn-58Bi 솔더가 연구되어져왔다. 본 연구는 Sn-58Bi 솔더와 Sn-58Bi 에폭시 복합솔더를 이용하여 PCB 기판에 접합한 후, 시효처리에 따른 솔더/기판 계면 미세구조와 기계적 특성변화를 연구하였다. OSP 표면처리된 PCB 기판에 솔더볼을 형성 한 후 85, 95, 105, $115^{\circ}C$에서 100~1000 시간동안 시효처리하였으며, 기계적 특성평가로 저속전단시험을 진행하였다. 시효 처리 시간 및 온도의 증가에 따라 Cu6Sn5 금속간화합물층은 성장하였으며 Sn-58Bi 솔더 금속간화합물층이 Sn-58Bi 에폭시 복합솔더보다 두꺼웠다. 전단시험 결과, Sn-58Bi 에폭시 복합솔더가 Sn-58Bi 솔더보다 약 2배 높은 전단강도 값을 나타냈으며 시효시간이 증가할수록 전단강도 값은 감소하였다.

PCITS에 의해 소손된 강이음쇠형 CSST의 특성 해석에 관한 연구 (A Study on the Properties Analysis of an Iron Fittings Type CSST Damaged by the PCITS)

  • 이장우;최충석
    • 한국화재소방학회논문지
    • /
    • 제30권4호
    • /
    • pp.121-127
    • /
    • 2016
  • 본 논문에서는 대전류공급장치(PCITS)에 의해 소손된 강이음쇠형(iron fittings type) 금속플렉시블호스(CSST)의 구조 및 전기적 특성을 해석하였다. CSST는 보호 피막, 튜브, 너트, 클램프 링, 플레어 캡, 소켓, 볼 밸브 등으로 구성되어 있다. CSST의 내전압 평가는 전기 충전부와 비충전부 사이에 교류 전압 220 V를 1분간 인가하여 견뎌야 한다. 직류 500 V에 의한 절연 성능의 평가는 온도 상승 시험 전에 $1M{\Omega}$ 이상, 시험이 끝난 후에는 $0.3M{\Omega}$ 이상을 요구한다. 정상 제품의 평균 저항은 $11.5m{\Omega}$이었으나 PCITS로 130 A를 흘려 소손된 제품의 평균 저항 $11.50m{\Omega}$이었다. 또한 130 A가 약 10 s 흘렀을 때 튜브의 보호 피막이 일부 용융되었고, 검정색의 연기가 발생하였다. 60 s 경과되면 튜브의 대부분이 적색으로 발열되며, 전류가 120 s 흘렀을 때는 적열 범위가 넓어졌다. 95%의 신뢰 구간(CI)의 검증에서 P 값은 0.019로 정규 분포를 갖지 못하였으나 Anderson-Darling (AD) 통계량은 0.896, 표준 편차는 0.5573 등으로 양호한 특성을 나타냈다.

남대양산 크릴의 이용에 관한 연구 (STUDIES ON THE UTILIZATION OF ANTARCTIC KRILL 2. Processing of Paste Food, Protein Concentrate, Seasoned Dried Product, Powdered Seasoning, Meat Ball, and Snack)

  • 박영호;이응호;이강호;변재형;김세권;김동수
    • 한국수산과학회지
    • /
    • 제13권2호
    • /
    • pp.65-80
    • /
    • 1980
  • 크릴을 원료로 하여 품에 대한 화학적 및 관능적 평가를 포함하는 일련의 실험을 하여 얻은 결과를 요약하면 다음과 같다. 1. krill paste의 제조에 있어서 krill juice는 $71\%$, krill scrap는 $29\%$의 수율을 나타내었으며, krill juice에서 분리한 krill paste는 $53\%$, krill broth는 $47\%$의 수율을 나타내었다. Krill paste의 아미노산 조성은 proline, glutamic acid, aspartic acid, lysine 및 leucine의 함량이 많았고, histidine, methionine, tyrosine, serine 및 threonine의 함량이 적었으며 필수아미노산에 있어서는 leucine 및 lysine의 함량이 높았고 methionine의 함량이 낮았다. 2. 크릴분말단백질의 제조에 있어 최적가공조건은 원료에 대하여 10배량의 $90\%$ isopropyl alcohol나 ethyl alcohol을 가하여 $80\%$에서 5분간 추출하는 조작을 5회 반복하는 것이었다. 추출용제로서는 ethyl alcohol 보다 isopropyl alcohol이 양호하였으며, 크릴분말단백질의 수율은 생동결크릴의 경우는 isopropyl alcohol 추출때가 $10.2\%$ ethyl alcohol 추출때는 $8.8\%$였고, 자숙동결크릴의 경우는 각각 $13.0\%$$11.8\%$였다. 크릴분말단백질의 아미노산조성은 생육질부의 아미노산조성과 거의 비슷하였다. 한편 크릴분말단백질을 첨가한 국수를 제조하여 관능검사를 한 결과, 원료 밀가루에 대하여 $3\%$까지 첨가 한 것이 국수 품질에 큰 영향을 주지않고 단백질을 강화할 수 있다고 판정하였다. 3. 크릴조미조림품의 품질은 전반적으로 볼 때 열풍건조크릴을 원료로 한 것이 가장 양호하였고, 다음이 일건크릴을 원료로 했을 때이며, 자숙냉결크릴을 원료로 한 것이 가장 못 하였다. 4. 크릴의 건조분말에 볶은참깨가루, 소금, 분말우육엑스, monosodium glutamate, 고추가루 및 후추가루를 각종 비율로 배합하여 분말조미료를 만들 었을 때의 품질은 색택에 있어서는 열풍건조크릴을 사용한 것이 양호하였고, 냄새는 일건크릴을 원료로 한 것이 양호하였으며, 열탕에 녹였을 때의 풍미는 sample B(크릴함량 $77\%$)가 가장 적당하였다. 5. 크릴 및 조기를 각종 비율로 배합하고 여기에 일정량의 밀가루, monosodium glutamate 및 소금을 첨가하여 krill meat ball을 만들어 그 색택, 맛 냄새, texture 및 젤리강도 등에 대하여 관능검사를한 결과, 크릴의 첨가량이 $25\%$까지의 제품이 양호하였으며, 생동결 및 자숙동결크릴을 원료로 했을 때의 품질차는 인정할 수 없었다. 6. 크릴, $\alpha$-전분, 고구마전분, 설탕, 소금, monosodium glutamate, glycine, 주석산칼리, 중탄산암모늄 및 중탄산소오다를 각종 비율로 배합하여 크릴${\cdot}$스낵${\cdot}$과자를 만들어 품질을 비교 검토한 결과 sample B(크림함량 $7.1\%$) 및 sample C(크릴함량 $10.8\%$)서 가장 양호하였다. 크릴${\cdot}$스낵${\cdot}$과자의 제조에 있어서 각종 전분의 가공적성을 시험한 결과 고구마전분이 가장 양호하였고 다음이 옥수수전분, 갈분의 순이었으며, 밀가루가 가장 못 하였다. 튀김방법은 소금튀김에 비하여 기름튀김이 좋은 결과를 나타내있고, 튀김온도는 $210\~215^{\circ}C$가 적당하였다.

  • PDF