References
- J. W. Yoon and S. B. Jung, "Investigation of interfacial reactions between Sn-5Bi solder and Cu substrate", J. Electron. Mater., 359, 202 (2003).
- J. J. Soh, D. S. Shim and W. B. Byung, "Technical trend of Restriction of Hazardous Substances Directive(RoHS) (in korean)", Conference of The Korean Institute of Electrical Engineering, 1289 (2009).
- J. W. Yoon, C. B. Lee and S. B Jung, "Growth of an Intermetallic Compound layer with Sn-3.5Ag-5Bi on Cu and Ni-P/Cu during Aging Treatment", J. Electron. Mater., 32(11), 1195 (2003). https://doi.org/10.1007/s11664-003-0011-8
- J. W. Yoon, W. C. Moon and S. B Jung, "Interfacial reaction of ENIG/Sn-Ag-Cu/ENIG sandwich solder joint during isothermal aging", Microelectron. Eng., 83, 2329 (2006). https://doi.org/10.1016/j.mee.2006.10.027
- S. W. Kim, J. W. Yoon and S. B. Jung, "Interfacial Reactions and Shear Strengths between Sn-Ag-based Pb-Free Solder Balls and Au/EN/Cu metallization", J. Electron. Mater., 33(10), 1182 (2004). https://doi.org/10.1007/s11664-004-0121-y
- J. Glazer, "Microstructure and Mechanical Properties of Pb-Free Solder Alloys for Low-Cost Electronic Assembly: A Review", J. Electron. Mater., 23(8), 693 (1994). https://doi.org/10.1007/BF02651361
- J. W. Kim, D. G. Kim, J. M. Koo, J. W. Yoon, S. L. Choi, K. S. Kim, J. D. Nam, H. J. Lee, J. H. Joo and S. B. Jung, "Characterization of Failure Behaviors in Anisotropic Conductive Interconnection", Mater. Trans., 48(5), 1070 (2007). https://doi.org/10.2320/matertrans.48.1070
- J. W. Yoon, B. I. Noh, Y. H. Lee, H. S. Lee, S. B. Jung, "Effects of isothermal aging and temperature-humidity treatment of substrate on joint reliability of Sn-3.0Ag-0.5Cu/OSP-finished Cu CSP solder joint", Microelectron. Reliab., 48, 1864 (2008). https://doi.org/10.1016/j.microrel.2008.07.065
- K. Zeng and K. N. Tu, "Six cases of reliability study of Pb-free solder joints in electronic packaging technology", Mat. Sci. Eng. A-Struct., 38, 55 (2002).
- S. K. Kang, "Lead (Pb)-Free Solders for Electronic Packaging", J. Electron. Mater., 23(8), 701 (1994). https://doi.org/10.1007/BF02651362
- C. B. Lee, J. W. Yoon, S. J. Suh and S. B. Jung, "Intermetallic compound layer formation between Sn-3.5 mass %Ag BGA solder ball and (Cu, immersion Au/electroless Ni-P/Cu) substrate", J. Mater. Sci., 14, 487 (2003).
- J. W. Yoon, S. W. Kim, J. M. Koo, D. G. Kim and S. B. Jung, "Reliability Investigation and Interfacial Reaction of Ball-Grid-Array Packages Using the Lead-Free Sn-Cu Solder", J. Electron. Mater., 33(10), 1190 (2004). https://doi.org/10.1007/s11664-004-0122-x
- J. W. Yoon, S. W. Kim and S. B. Jung, "IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate", J. Alloy. Compd., 392, 247 (2005). https://doi.org/10.1016/j.jallcom.2004.09.045
- I. E. Anderson, "Development of Sn-Ag-Cu and Sn-Ag-Cu-X alloys for Pb-free electronic solder applications", Lead-Free Electronic Solders. Springer US, 55 (2007).
- J. W. Yoon, Y. H. Lee, D. G. Kim, H. B. Kang, S. J. Suh, C. W. Yang, C. B. Lee, J. M. Jung, C. S. Yoo and S. B. Jung, "Intermetallic compound layer growth at the interface between Sn-Cu-Ni solder and Cu substrate", J. Alloy. Compd., 381, 151 (2004). https://doi.org/10.1016/j.jallcom.2004.03.076
- S. H. Kim, J. M. Kim, S. H. Yoo and Y. B. Park, "Effects of PCB surface Finishes on Mechanical Reliability of Sn-1.2Ag-0.7Cu-0.4In Pb-free Solder Joint", J. Microelectron. Packag. Soc., 19(4), 57 (2012). https://doi.org/10.6117/kmeps.2012.19.4.057
- W. R. Myung, Y. I. Kim and S. B. Jung, "Mechanical property of the epoxy-contained Sn-58Bi solder with OSP surface finish", J. Alloy. Compd., 615, 411 (2014). https://doi.org/10.1016/j.jallcom.2014.01.078
- I. Shohji, T. Yoshida, T. Takahashi and S. Hioki, "Comparison of low-melting lead-free solders in tensile properties with Sn-Pb eutectic solder", J. Mater. Sci., 15, 219 (2004).
- C. Fuchs, T. Schreck, M. Kaloudis, "Interfacial reactions between Sn-57Bi-1Ag solder and electroless Ni-P/immersion Au under soild-state aging", J. Mater. Sci., 47, 4036 (2012). https://doi.org/10.1007/s10853-012-6257-x
- J. N. Choi, M. K. Ko, S. M. Lee and S. B. Jung, "Effects of Bonding Conditions on Mechanical Strength of Sn-58Bi Lead-Free Solder Joint using Thermo-compression Bonding Method", J. Microelectron. Packag. Soc., 20(2), 17 (2013). https://doi.org/10.6117/kmeps.2013.20.2.017
- Standard, J. E. D. E. C., and Solid State Technology Association, "Solder Ball Shear." JEDEC Solid State Technology Association JESD22-B117A October (2006).
- J. W. Yoon, C. B. Lee and S. B. Jung, "Interfacial Reactions Between Sn-58 mass% Bi Eutectic Solder and (Cu, Electroless Ni-P/Cu)Substrate", Mater. Trans., 43(8), 1821 (2002). https://doi.org/10.2320/matertrans.43.1821
- P. T. Vianco, P. F. Hlava and A. C. Kilgo, "Intermetallic Compound Layer Formation Between Copper and Hot-Dipped 100In, 50In-50Sn, 100Sn, and 63Sn-37Pb Coatings", J. Electron. Mater., 23(7), 583 (1994). https://doi.org/10.1007/BF02653343
- J. W. Kim and S. B. Jung, "Failure mechanism of Pb-bearing and Pb-free solder joints under high-speed shear loading", Met. Mater. Int., 16(1), 7 (2010). https://doi.org/10.1007/s12540-010-0007-x
- J. M. Koo and S. B. Jung, "Effect of displacement rate on ball shear properties for Sn-37Pb and Sn-3.5Ag BGA solder joints during isothermal aging", Microelectron. Reliab., 47(12), 2169 (2007). https://doi.org/10.1016/j.microrel.2006.09.043
Cited by
- Effects of Aging Treatment on Mechanical Properties of Sn-58Bi Epoxy Solder on ENEPIG-Surface-Finished PCB vol.45, pp.11, 2016, https://doi.org/10.1007/s11664-016-4803-z
- Lead-free Solder Technology and Reliability for Automotive Electronics vol.22, pp.3, 2015, https://doi.org/10.6117/kmeps.2015.22.3.001
- Drop Reliability of Epoxy-contained Sn-58 wt.%Bi Solder Joint with ENIG and ENEPIG Surface Finish Under Temperature and Humidity Test vol.45, pp.7, 2016, https://doi.org/10.1007/s11664-016-4517-2
- Microstructures and Drop Impact Test of SAC305, Sn58%Bi and Epoxy Sn58%Bi Solder Joint on the OSP Surface Finished PCB Substrate vol.36, pp.2, 2014, https://doi.org/10.5781/jwj.2018.36.2.3
- Suppression of the Growth of Intermetallic Compound Layers with the Addition of Graphene Nano-Sheets to an Epoxy Sn–Ag–Cu Solder on a Cu Substrate vol.12, pp.6, 2014, https://doi.org/10.3390/ma12060936