• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.318-322
• /
• 1999

Perdeuterated hexaflouroacetylacetonato-neodymium [$Nd(HFA-D)_3$] complexes were synthesized by the keto-enol tautomerism reaction of $Nd(HFA-D)_3$ in methanol-d$_4$ in order to reduce the radiationless transition to the ligands. The emission properties of $Nd(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents; $Methanol-d_4$, $Aceton-d_6$, $THE-d_8$ and $DMSO-d_6$, and these properties depended on the coordination ability of solvent molecules. The intensity and lifetime of the emission in dimethysulfoxide (DMSO-$d_6$) were superior to those in other in other deuterated solvents. It was suggested that the anhydrous $DMSO-d_6$might be the most appropriate solvent for the liquid laser material of $Nd(HFA-D)_3$ complex.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.485-491
• /
• 2012

In this paper, the implementations of a $0.1{\mu}m$ gallium arsenide (GaAs) pseudomorphic high electron mobility transistor process for a low noise amplifier (LNA), a subharmonically pumped (SHP) mixer, and a single-chip receiver for 70/80 GHz point-to-point communications are presented. To obtain high-gain performance and good flatness for a 15 GHz (71 GHz to 86 GHz) wideband LNA, a five-stage input/output port transmission line matching method is used. To decrease the package loss and cost, 2nd and 4th SHP mixers were designed. From the measured results, the five-stage LNA shows a gain of 23 dB and a noise figure of 4.5 dB. The 2nd and 4th SHP mixers show conversion losses of 12 dB and 17 dB and input P1dB of -1.5 dBm to 1.5 dBm. Finally, a single-chip receiver based on the 4th SHP mixer shows a gain of 6 dB, a noise figure of 6 dB, and an input P1dB of -21 dBm.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.102-109
• /
• 1997

The structures of novel branched oligosaccharides synthesized by the acceptor reaction with dextransucrase from Leuconostoc mesenteriodes M-12 were proposed in accordance with the results obtained from enzymatic hydrolyses and a partial acid hydrolysis. The structure of branched oligosaccharide B4 was shown to be 62-O-$\alpha$-D-kojibiosylmaltose. Branched oligosaccharide B5 was shown to be 63-O-$\alpha$-D-kojibiosylpanose. By reacting the acceptor reaction products with endodextranase a novel branched oligosaccharide (D4) could be produced. D4 was derived from the result of endodextranase hydrolysis of oligosaccarides synthesized by the second acceptor reaction with dextransucrase and was resistant to endodextranase and glucoamylase. The proposed structure of D4 was 62-O-$\alpha$-D-kojibiosylisomaltose. Formation pattern of the acceptor reaction products smaller than d.p. 6 with linear or branched linkage was also shown.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.153-168
• /
• 2015

In Kyung-GI DO, An-sung, Each local autonomous entity developed the character design to inform the public relations and revitalize local economy and culture. consequently, These have got benefits with marketing local speciality related to their an-sung character; we call it name is arum, pung-mul, duck-bugi who korea traditional face characters. On the contrary, Most of old characters which have been fallen off their formative qualities became a reason that unfit (4D,3D) special film at local doom movie theater. This thesis aims to study on the character of 'namsadang' group what have been produced in ansung-si, that the show up to people about an-sung 4D Contents what local actually character and to make it more competitive through 3D,4D spacial character project developing process. It is need for new various characters, that (3D,4D-VFX) -Graphics of new an-sung'namsadang' group. that will be total different and new development. total VFX; 4-Dimantion visual graphics released in next an-sung local festival, Business prospects are bright and receiving benefits are increasing. As seen in the case of the character of in 2015, it can be a measure to earn benefits as a higher value-added business if it is managed in the local autonomous entities. In this thesis, I propose what the of character in the local special graphics; VFX style characters design. also I was show up to '4D contents character;' ; 'namsadang' group; creative processing including planing. It is possible to be ranged from special 4D series animation, a feature-length special effct cartoon film, character products, and even local doom Theme parks show up film. which are all expected high profits. These profits will be returned back to the an-sung local autonomous entity, who can use them to develop new contents, one of foundations in local economy. As a result, it is helpful to make local traits and effective tourist attractions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.759-764
• /
• 2020

As the paradigm of manufacturing and production is also changing in line with the fourth industrial revolution, the social demands and directions for Industry 4.0 cannot be reversed, and the scalability and universality of 3D printing technology are attracting attention. 3D printer is a technology developed for the purpose of reducing product development costs, and with the recent expiration of 3D printer technology patent, related technology has been revealed and various technologies applied are being researched and developed, and various singularities have been discovered and supplemented. Thus, to compensate for the inconvenience of the current output method, which requires direct offline adjustment of the machine in the use of 3D printers and 3D printing through direct input of modeling data, the design of the IoT system is proposed to perform real-time online output requests for multiple 3D printers, monitoring functions that can expect normal outputs, and online real-time remote management functions for multiple 3D printers.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.05a
• /
• pp.549-558
• /
• 2017

바야흐로 4차 산업혁명의 시대가 도래하면서, 4차 산업혁명과 관련된 기술에 대한 관심 또한 나날이 높아져 가고 있다. 이런 시대적 상황에 맞춰, 본 연구에서는 웹 검색트래픽을 활용하여 4차 산업혁명 관련 기술의 국내 외 트렌드를 비교하고 관련된 기술에 대한 국내 정부R&D 과제 현황에 대해 분석해 보고자 한다. 본 분석은 먼저 관련 기술에 대한 정부 R&D 현황 과제 현황을 네트워크 분석하고 분석된 기술을 4차 산업혁명의 3가지 카테고리로 구분한다. 이후 카테고리별로 선별된 각각의 기술에 대해 구글의 웹 검색트래픽을 활용하여 관련된 기술의 국내 외 트렌드를 비교 분석한다. 본 연구를 통해 4차 산업혁명 관련 기술에 대한 과거와 현재의 관심 동향을 확인할 수 있을 것으로 예상된다. 또한, 해당 기술과 관련된 정부 R&D 과제 현황을 네트워크 분석하고 시각화하여 4차 산업혁명 관련 R&D 현황에 대한 직관적인 정보를 제공하고자 한다. 본 연구는 인류 최대의 혁명으로 정의되는 4차 산업혁명 기술에 대한 국내 외 트렌드 정보와 함께 현재까지 진행되어온 정부의 R&D 현황을 직관적으로 볼 수 있게 제공함으로써, 4차 산업혁명과 함께 다가오는 미래에 대한 올바른 정책 방향 설정에 기여할 것으로 기대된다.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.1
• /
• pp.7-14
• /
• 1994

Immature zygotic embryos of five Korean soybean cultivars cultured on Murashige and Skoog's (MS) medium supplemented with various concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) produced somatic embryos without forming an intervening callus. The highest frequency (up to 90%) of somatic embryo formation was obtained when zygotic embryos were cultlued on medium containing 1 to 2 mga 2, 0-D in four cultivars. However the frequency was highly variable to the cultivars. Transversely sliced primary somatic embryo halves were also capable of forming secondary embryos at frequencies of up to 70% when cultured on medium containing 0.1 to 1 mg/L 2,4-D. Somatic embryos formed on zygotic embryos cultured on medium containing 0.1 to 0.2 mg/L 2,4-D had two cotyledons more frequently than one horn-type cotyledon and those on medium containing 0.5 to 4mg/L 2,4-LD had a horm-type cotyledon at a prominently higher freequency. However somatic embryos on medium containing 10mg/L or higher concentrations of 2,4-D were usually shunted at the globular stage even after transfer to medium containing lower concentrations of 2,4-D or other growth regulators. non somatic embryos with one or two cotyledons or a hem-type cotyledon were transferred to medium containing $GA_3$, those with two cotyledons converted to plantlets at a higher frequency (25%) than the others.

• IMMUNE NETWORK
• /
• v.13 no.5
• /
• pp.194-198
• /
• 2013

Recent papers have shown that the initial event in the pathogenesis of autoimmune type 1 diabetes (T1D) comprises sensing of molecular patterns released from apoptotic ${\beta}$-cells by innate immune receptors such as toll-like receptor (TLR). We have reported that apoptotic ${\beta}$-cells undergoing secondary necrosis called 'late apoptotic' ${\beta}$-cells stimulate dendritic cells (DCs) and induce diabetogenic T cell priming through TLR2. The role of other innate immune receptors such as TLR7 or TLR9 in the initiation of T1D has also been suggested. We hypothesized that TLR2 blockade could inhibit T1D at the initial step of T1D. Indeed, when a TLR2 agonist, $Pam3CSK_4$ was administered chronically, the development of T1D in nonobese diabetic (NOD) mice was inhibited. Diabetogenic T cell priming by DCs was attenuated by chronic treatment with $Pam3CSK_4$, indicating DC tolerance. For the treatment of established T1D, immune tolerance alone is not enough because ${\beta}$-cell mass is critically reduced. We employed TLR2 tolerance in conjunction with islet transplantation, which led to reversal of newly established T1D. Dipeptidyl peptidase 4 (DPP4) inhibitors are a new class of anti-diabetic agents that have beneficial effects on ${\beta}$-cells. We investigated whether a combination of DPP4 inhibition and TLR2 tolerization could reverse newly established T1D without islet transplantation. We could achieve normoglycemia by TLR2 tolerization in combination with DPP4 inhibition but not by TLR2 tolerization or DPP4 inhibition alone. ${\beta}$-cell mass was significantly increased by combined treatment with TLR2 tolerization and DPP4 inhibition. These results suggest the possibility that a novel strategy of TLR tolerization will be available for the inhibition or treatment of established T1D when combined with measures increasing critically reduced ${\beta}$-cell mass of T1D patients such as DPP4 inhibition or stem cell technology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.358-365
• /
• 2008

A differential-gain-controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8GHz$ UWB system. In high gain mode, measurements show a differential power gain of $14.1{\sim}15.8dB,\;13.3{\sim}15dB$, respectably, an input return loss higher then 10dB, an input IP3 of -19.3 dBm, a noise figure of $4.85{\sim}5.09dB$, while consuming only 19.8 mW of power from a 1.8V DC supply. In low gain mode, measurements show a differential power gain of $-6.1{\sim}-4.2dB,\;-7.6{\sim}-5.6dB$, respectably, an input return loss higher then 10dB, an input IP3 of -1.45 dBm, a noise figure of $8.8{\sim}10.3dB$, while consuming only 5.4mW of power from a 1.8V DC supply.

• Environmental Analysis Health and Toxicology
• /
• v.15 no.3
• /
• pp.107-113
• /
• 2000

Chlorophenoxy acids are one of the most useful classes of chlorinated herbicides. Specially 2, 4-D and 2, 4, 5-T were known to endocrine distruptors. In this study, these pesticides in water samples were extracted by liquid-liquid extration at acidic conditions and then derivatization of acidic group was carried out various esterifications using by CH$_3$I/Acetone -K$_2$CO$_3$, H$_2$SO$_4$/MeOH or TFAA/TFE. That result, Sensitivities of TFE derivatized 2, 4-D and 2, 4, 5-T are prior to the others. The recoveries of 2, 4-D and 2, 4, 5-T were 98% and 82% respectively using diethyl ether as an extracting solvent.