• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.138-142
• /
• 1998

Lithium triborate, LiB3O5(Mr=119.37), 단결정을 상단 종자정 융액법으로 성장시켰으며, 결정구조를 X-선 회절법으로 연구하였다. 결정계는 사방정계이며 공간군은 Pna21(No. 33)이다. 단위포의 상수는 a=8.432(1) , b=7.364(1) , c=5.110(1) , α=β=γ=90.00o, V=317.3(6) 3, V=4, Dx=2.50 gcm-3, MoKα1, λ=0.71069 , μ=2.3/cm, F(000)=232, T=293 K 이었다. 최종 구조의 오차인자는 520개 회절 점에서 각각 R=0.0222과 wR=0.0582이었다.

• Korean Journal of Mathematics
• /
• v.30 no.3
• /
• pp.467-474
• /
• 2022

In this article, we consider the integral operator 𝓒^b,c, which is defined as follows: $${\mathcal{C}}^{b,c}(f)(z)={\displaystyle\smashmargin{2}{\int\nolimits_{0}}^z}{\frac{f(w)*F(1,1;c;w)}{w(1-w)^{b+1-c}}}dw,$$ where * denotes the Hadamard/ convolution product of power series, F(a, b; c; z) is the classical hypergeometric function with b, c > 0, b + 1 > c and f(0) = 0. We investigate the boundedness of the 𝓒^b,c operators on Bloch spaces.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.31-38
• /
• 2018

This study was conducted to investigate the possibility of biochar as an alternative medium to peatmoss using for Aster spathulifolius. We cultivated A. spathulifolius in four potting media with different mixing rates (v/v) of peatmoss (P) and biochar (B) as follows: B0+P3, B1+P2, B2+P1, and B3+P0 with vermiculite 3 + perlite 3. Also, we analyzed the chemical properties of media and the plant growth characteristics. The results were as follows: In case of media's chemical condition, B0+P3 and B1+P2 treatments showed higher tendency (p < 0.05). Plant height on B0+P3 and B1+P2 treatments was much higher than that on other treatments (p < 0.05). Root length on B1+P2 treatment was higher than on B0+P3 treatment (p < 0.05). B0+P3 and B1+P2 treatments showed higher number of leaves and dry biomass than other treatments. Therefore, our results support that Biochar : Peatmoss : Vermiculite : Perlite (1/3 : 2/3 : 1 : 1, v/v) could be a more economical potting medium for A. spathulifolius than peatmoss : vermiculite : perlite (1 : 1 : 1, v/v).

• Communications of the Korean Mathematical Society
• /
• v.23 no.4
• /
• pp.511-528
• /
• 2008

Let (R, m) be a 2-dimensional regular local ring with algebraically closed residue field R/m. Let K be the quotient field of R and $\upsilon$ be a prime divisor of R, i.e., a valuation of K which is birationally dominating R and residually transcendental over R. Zariski showed that there are finitely many simple $\upsilon$-ideals $m\;=\;P_0\;{\supset}\;P_1\;{\supset}\;{\cdots}\;{\supset}\;P_t\;=\;P$ and all the other $\upsilon$-ideals are uniquely factored into a product of those simple ones [17]. Lipman further showed that the predecessor of the smallest simple $\upsilon$-ideal P is either simple or the product of two simple $\upsilon$-ideals. The simple integrally closed ideal P is said to be free for the former and satellite for the later. In this paper we describe the sequence of simple $\upsilon$-ideals when P is satellite of order 3 in terms of the invariant $b_{\upsilon}\;=\;|\upsilon(x)\;-\;\upsilon(y)|$, where $\upsilon$ is the prime divisor associated to P and m = (x, y). Denote $b_{\upsilon}$ by b and let b = 3k + 1 for k = 0, 1, 2. Let $n_i$ be the number of nonmaximal simple $\upsilon$-ideals of order i for i = 1, 2, 3. We show that the numbers $n_{\upsilon}$ = ($n_1$, $n_2$, $n_3$) = (${\lceil}\frac{b+1}{3}{\rceil}$, 1, 1) and that the rank of P is ${\lceil}\frac{b+7}{3}{\rceil}$ = k + 3. We then describe all the $\upsilon$-ideals from m to P as products of those simple $\upsilon$-ideals. In particular, we find the conductor ideal and the $\upsilon$-predecessor of the given ideal P in cases of b = 1, 2 and for b = 3k + 1, 3k + 2, 3k for $k\;{\geq}\;1$. We also find the value semigroup $\upsilon(R)$ of a satellite simple valuation ideal P of order 3 in terms of $b_{\upsilon}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.35-46
• /
• 1997

This paper describes a B-ISDN terminal adapter which provides B-ISDN adaptation functions for conventional services such as N-ISDN, video, connectionless data service in the ATM based B-ISDN. These services are provided individually or simultaneously. The B-ISDN terminal adapter offers interfaces of N-ISDN, video codec, Ethernet for supporting conventional services. And it provides various types of services which are available in conventional terminals and networks through B-ISDN. The AAL type 1 is used for N-ISDN and video services, the AAL type 3/4 and 5 are used for LAN service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.106-113
• /
• 2003

In this paper, we proposed low noise amplifier for 2.4GHz ISM frequency with CMOS technology. The property of noise and gain is improved by cascode architecture. The architecture, which common source output of cascode is connected to input of parallel MOS, reduce IM. The LNA results based on Hynix 0.35${\mu}{\textrm}{m}$ 2poly 4metal CMOS processor with a 3.3V supply. It achieves a gain of 13dB, noise figure of 1.7dB, IP3 of 8dBm, Input/output matching of -31dB/-28dB, reverse isolation of -25dB. and power dissipation of 4.7mW with HSPICE simulation. The size of layout is smaller than 2 ${\times}$ 2mm with Mentor.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.925-930
• /
• 2003

The dielectric polarizability-related factors contributing to the $\tau$$_{\varepsilon}$ have been analysed in terms of dielectric permittivity $\varepsilon$, Tolerance Factor (TF), and octahedron tilt angles in (1-x)CaTi $O_3$-x[A(B', B″) $O_3$] (A=Ca, La, Li, B'=Al, Fe, Mg, B″=Nb, Ta) and (S $r_{0.2}$C $a_{0.8}$)( $Ti_{1-x}$ Z $r_{x}$) $O_3$. All the compounds have the orthorhombic Pbnm structure except the end members A(B', B″) $O_3$ and the solid solutions of x$\geq$0.8. The additional dipole field effect is suggested as a dominant factor contributing to $\tau$$_{\varepsilon}$ in CaTi $O_3$-based ceramics having relatively large $\varepsilon$, which has not been generally considered in the previous reports dealing with the $\tau$$_{\varepsilon}$. This study has been focussed on delineating the dipole field effect on the $\tau$$_{\varepsilon}$ in comparison to the octahedron tilt effect in CaTi $O_3$-based ceramics.cs..cs.

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.154-158
• /
• 1999

Magnetic properties and microstructure of nanocrystalline $\alpha$-(Fe, Co)-based Nd-(Fe, Co)-B-Nb-Cu alloys have been investigated. $Nd_x(Fe_{0.9}Co_{0.1})_{90-x}B_6Nb_3Cu_1$(x=2, 3, 4, 5, 6) alloys prepared by rapid solidification process show amorphous phase except the one with x=2. By a proper annealing, the amorphous in the alloy is changed to a nanocrystalline phase. It is confirmed that the nanocrystalline alloys are composed of $\alpha$-(Fe, Co) and $Nd_2(Fe, Co)_{14}B_1$ phase. The optimally annealed $Nd_3(Fe_{0.9}Co_{0.1})_87B_6Nb_3Cu_1$ alloy shows the highest remanence of 1.55 T. The coercivity increases with the increase of Nd content The maximum coercivity of 4.6 kOe is obtained from an optimally annealed $Nd_6(Fe_{0.9}Co_{0.1})_84B_6Nb_3Cu_1$ alloy, resulting in the maximum energy product of 10.6 MGOe.