• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.310-323
• /
• 2020

To treat congenital heart disease, it is important to understand the anatomical structure correctly. Three-dimensional (3D) printed models of the heart effectively demonstrate the structural features of congenital heart disease. Occasionally, the exact characteristics of complex cardiac malformations are difficult to identify on conventional computed tomography, magnetic resonance imaging, and echocardiography, and the use of 3D printed models can help overcome their limitations. Recently, 3D printed models have been used for congenital heart disease education, preoperative simulation, and decision-making processes. In addition, we will pave the way for the development of this technology in the future and discuss various aspects of its use, such as the development of surgical techniques and training of cardiac surgeons.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.91-97
• /
• 2022

The wettability and rheological properties of solder paste with the size of the solder powder were evaluated. To formulate the solder paste, three types of solder powder were used: T4 (20~28 ㎛), T5 (15~25 ㎛), and T6 (5~15 ㎛). The viscosities of the T4, T5, and T6 solder pastes at 10 RPM were 155, 263, and 418 Pa·s, respectively. After 7 days, the viscosity of the T4 solder paste slightly increased by 2.6% and that of T5 was increased by 20.6%. The viscosity of the T6 solder paste after 7 days could not be measured due to high viscosity. The viscosity variation with solder particle size also affected on the printability of the solder. In the case of the T4 solder paste, printability, slump, bridging, and soldering properties were excellent. On the other hand, T5 showed slight dewetting and solder ball defects. Especially, T6, which the smallest powder size, showed poor printability and dewetting at the edge of solder.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.129-137
• /
• 2018

The resistance to corrosion of additive manufactured (3D printing) Ti-6Al-4V alloys was investigated using micro-electrochemical tests. In terms of corrosion resistance, the acicular martensitic ${\alpha}^{\prime}$ phase in such additive manufactured Ti-6Al-4V was the focus of attention, and its behavior was distinct from that of conventional subtractive manufactured Ti-6Al-4V. To order to identify ${\alpha}^{\prime}$ phase, XRD tests were performed and micro Vickers hardness was measured for different grains (bright and dark grains) in the additive manufactured Ti-6Al-4V alloy. Micro-electrochemical tests were performed to measure corrosion resistance of bright and dark grains in the additive manufactured Ti-6Al-4V alloy with specially designed electrochemical micro-droplet cell. Critical pitting temperature (CPT) measurement was performed to evaluate the resistance to pitting corrosion of additive manufactured Ti-6Al-4V alloys with different volumes of ${\alpha}^{\prime}$ phase and subtractive manufactured Ti-6Al-4V alloy. The dark grains of the laminated Ti-6Al-4V alloy distributed broader than the bright grains measured with low microhardness. The dark grains of the Ti-6Al-4V alloy, which was rich in martensite ${\alpha}^{\prime}$, had lower general corrosion and pitting resistance than bright grains. As the fraction of martensite ${\alpha}^{\prime}$ phase increased, the resistance to the pitting corrosion decreased.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.5
• /
• pp.276-284
• /
• 2019

Objectives: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. Materials and Methods: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. Results: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups ($2.6{\pm}1.3days$), while the RP group required the least number of days to reach an 80% recovery rate ($7.8{\pm}2.2days$). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. Conclusion: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• 재활복지
• /
• v.22 no.3
• /
• pp.23-39
• /
• 2018

The fourth industrial revolution and technological innovation will make the job factor of people with disabilities complicated and difficult. Thus, this study analyzed the technical factors influencing the job structure and tried to find a way to develop the job of the people with disabilities in response to the 4th Industrial Revolution by changing the labor market and changing the trend of the employment by industry. The methods for this study are literature research and FGI. First, technological factors affecting the job structure of the Fourth Industrial Revolution are artificial intelligence, Internet and networking of things, 3D printing, big data, Second, technological innovation due to the industrial revolution was a major factor in the job structure. As the industrial revolution and technological innovation progressed, the job structure shifted rapidly from the manufacturing industry to the service industry, Third, as the measures of the 4th Industrial Revolution and the change of the job structure, it is necessary to make preemptive investment for the development of competency to cope with technological innovation, Finally, in order to respond to the Fourth Industrial Revolution and the rapidly changing technological innovation, the basic data of people with disabilities should be able to be big data.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.7-13
• /
• 2023

Purpose: In this study, we evaluated the effect of using a customized bolus on dose delivery in the treatment plan when cervical cancer protruded out of the body along with the uterus and evaluated reproducibility in patient set-up. Materials & Methods: The treatment plan used the Eclipse Treatment Planning System (Version 15.5.0, Varian, USA) and the treatment machine was VitalBeam (Varian Medical Systems, USA). The radiotherapy technique used 6 MV energy in the AP/PA direction with 3D-CRT. The prescribed dose is 1.8 Gy/fx and the total dose is 50.4 Gy/28 fx. Semiflex TM31010 (PTW, Germany) was used as the ion chamber, and the dose distribution was analyzed and evaluated by comparing the planned and measured dose according to each position movement and the tumor center dose. The first measurement was performed at the center by applying a customized bolus to the phantom, and the measurement was performed while moving in the range of -2 cm to +2 cm in the X, Y, and Z directions from the center assuming a positional error. It was measured at intervals of 0.5 cm, the Y-axis direction was measured up to ±3 cm, and the situation in which Bolus was set-up incorrectly was also measured. The measured doses were compared based on doses corrected to CT Hounsfield Unit (HU) 240 of silicon instead of the phantom's air cavity. Result: The treatment dose distribution was uniform when the customized bolus was used, and there was no significant difference between the prescribed dose and the actual measured value even when positional errors occurred. It was confirmed that the existing sheet-type bolus is difficult to compensate for irregularly shaped tumors protruding outside the body, but customized Bolus is found to be useful in delivering treatment doses uniformly.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.291-299
• /
• 2020

The purpose of this study was to be used as basic data for the development of future-type curriculum in health. The awareness and preparation of the forth industrial revolution were surveyed on 280 college students in health departments preparing medical technicians. A self-written structured questionnaire was used for data collection, and the recognition of the forth industry revolution was 2.74, 3D printing (3.59) was high, and neural network machine learning(2.33) was the lowest. Students majoring in Physiotherapy (3.00) had the highest perception, and those majored in Dental engineering(2.37) had the lowest perception, and there was a difference in the degree of perception of IoT by major (p=0.024). For the forth industrial revolution, 54.5% of students are preparing, and lack of interest (42.9%) is the most difficult reason to prepare, and 50.6% of educational experience and 60.9% of VR&AR game experience have experience. In the era of the forth industrial revolution, job loss (38.7%) was high, and the required competency was creative capacity (50.6%). Therefore, it is necessary to develop a curriculum related to the fourth industrial revolution and apply teaching methods that can increase the awareness and preparation of health college students in the era of the fourth industrial revolution.

• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.135-149
• /
• 2014

This study attempts to adapt and develop Korean prehistoric petroglyphs into textile design for children. For this purpose, literature review was conducted to understand the plasticity and symbolism expressed in Korean prehistoric petroglyphs. Also this study conducted textile design development as follows: First, the figures and faces in petroglyphs were selected because children can easily recognize them. Second, two groups of different ages (7-9 and 10-13) were allowed to freely draw the selected motifs. Third, some of the motifs created by the children were selected that show children's individuality and also keep the features of the original motifs. The children's motifs were developed into textile design using Texpro and Photoshop. Then digital textile printing and 3D mapping program were used to make pajamas (5 types), umbrellas (3 types), and simulate bedding sets (2 types) for children. This research's results are as follows: First, petroglyphs are symbolic language of human's oldest art form, and related to religious and mythical belief. Korean petroglyphs have plasticity showing the development steps in technique and expression, with various shapes such as animals, human figures, faces, masks and abstract figures. Third, children showed their interests in various human figures and faces of the petroglyphs, and it was easy to draw those motifs in their own way. Fourth, 10 design motifs were selected from the children's work and used to create textiles considering materials and colors for children. Total 10 items were made and presented. This study confirmed the usefulness of applying prehistoric petroglyphs to children's textiles designs. These designs may grow as a kind of cultural product for children who know about and like petroglyphs. They can be a niche market items too, made to order for children with individuality and who favor originality.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.71-76
• /
• 2012

A chip interconnection technology for smart fabrics was investigated by using flip-chip bonding of SnBi low-temperature solder. A fabric substrate with a Cu leadframe could be successfully fabricated with transferring a Cu leadframe from a carrier film to a fabric by hot-pressing at $130^{\circ}C$. A chip specimen with SnBi solder bumps was formed by screen printing of SnBi solder paste and was connected to the Cu leadframe of the fabric substrate by flip-chip bonding at $180^{\circ}C$ for 60 sec. The average contact resistance of the SnBi flip-chip joint of the smart fabric was measured as $9m{\Omega}$.